SCS210KE2C

SCS210KE2 Datasheet SiC Schottky Barrier Diode lOutline VR 1200V IF 5A/10A* QC 17nC(Per leg) TO-247N (*Per leg/ Both legs) (3) (1) (2) lFeatures lInner circuit 1) Low forward voltage 2) Negligible recovery time/current (1) Anode (2) Cathode (3) Anode 3) Temperature independent switching behavior (1) lApplications ・ Switch Mode Power Supply (2) (3) lPackaging specifications Package TO-247N ・ Uninterruptible Power Supply Packing ・ Solar Inverter Reel size (mm) - Tape width (mm) - ・ Motor Drive Type ・ Air Conditioner ・ EV Charger Tube Basic ordering unit (pcs) Packing code 30 C11 Marking SCS210KE2 lAbsolute maximum ratings (Tvj = 25°C) Parameter Symbol Value Unit Reverse voltage (repetitive peak) VRM 1200 V Reverse voltage (DC) VR 1200 V IF 5/10 A 22/45 A 17/34 A Continuous forward current Surge nonrepetitive forward current *3 *3 (Tc= 148°C) PW=10ms sinusoidal, Tvj=25°C IFSM PW=10ms sinusoidal, Tvj=150°C 89/170 PW=10ms square, Tvj=25°C Repetitive peak forward current *3 2 i t value*3 PW=10ms, Tvj=25°C 26/52 ∫i dt 2.5/10 A2s 1.4/5 A2s Total power dissipation *3 PD Virtual Junction temperature Tvj 83/160 *2 175 1/8 A W °C Tstg Range of storage temperature -55 to +175 *1 Tc=100°C, Tvj=150°C, Duty cycle=10% *2 Tc=25°C *3 Per leg/ Both legs www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 A IFRM 2 PW=10ms, Tvj=150°C *1 °C TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lElectrical characteristics (Tvj = 25°C) (Per Leg) Values Parameter Symbol VDC DC blocking voltage VF Forward voltage IR Reverse current Total capacitance Conditions Unit Min. Typ. Max. 1200 - - V IF=5A,Tvj=25°C - 1.4 1.6 V IF=5A,Tvj=150°C - 1.8 - V IF=5A,Tvj=175°C - 1.9 - V VR=1200V,Tvj=25°C - 5 100 mA VR=1200V,Tvj=150°C - 40 - mA VR=1200V,Tvj=175°C - 65 - mA VR=1V,f=1MHz - 260 - pF VR=800V,f=1MHz - 21 - pF IR =0.1mA C Total capacitive charge QC VR=800V,di/dt=500A/ms - 17 - nC Switching time tC VR=800V,di/dt=500A/ms - 15 - ns Symbol Conditions lThermal characteristics Values Parameter Unit Min. Typ. Max. Per Leg - 1.5 1.8 K/W Both Legs - 0.75 0.90 K/W RthJC Thermal resistance lTypical Transient Thermal Characteristics (Per Leg) Symbol Value Rth1 4.22×10 -1 Rth2 9.58×10 -1 Rth3 1.19×10 -1 Tj PD Unit K/W Value Cth1 2.40×10 -3 Cth2 5.95×10 -3 Cth3 1.40×10 -1 Rth,n Rth1 Cth1 Symbol Cth2 Unit Ws/K Tc Cth,n Ta www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lElectrical characteristic curves Fig.2 VF - IF Characteristics (Per Leg) Fig.1 VF - IF Characteristics (Per Leg) 100 Pulsed Forward Current : IF [A] Forward Current : IF [A] Tvj=25ºC 6 10 1 Tvj= -25ºC 0.1 Tvj=25ºC Tvj=75ºC 0.01 Tvj=125ºC Tvj=175ºC 0.0 0.5 1.0 1.5 5 Tvj=175ºC 4 Tvj=125ºC 3 Tvj=75ºC 2 　1 0 0.001 2.0 0.0 2.5 0.5 Forward Voltage : VF [V] 1.0 1.5 2.0 2.5 Forward Voltage : VF [V] Fig.3 VR - IR Characteristics (Per Leg) Fig.4 VR - Ct Characteristics (Per Leg) 1000 Tvj=125ºC 100 Tvj=75ºC 10 Tvj=25ºC 1 0.1 0.01 Tvj= -25ºC 0.001 0 500 Capacitance Between Terminals : Ct [pF] 1000 Tvj=175ºC Reverse Current : IR [mA] Tvj= -25ºC Pulsed 7 1000 Reverse Voltage : VR [V] www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 100 10 Tvj=25ºC f=1MHz 1 0.01 0.1 1 10 100 1000 Reverse Voltage : VR [V] 3/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lElectrical characteristic curves Fig.6 Power Dissipation (Per Leg) 90 10 80 70 Power Dissipation [W] Transient Thermal Impedance : ZthJC [K/W] Fig.5 Typical Transient Thermal Impedance vs. Pulse Width (Per Leg) 1 0.1 50 40 30 20 10 Tc=25ºC Single Pulse 0.01 1.E-4 60 0 1.E-3 1.E-2 1.E-1 1.E+0 25 1.E+1 50 Pulse Width : PW [s] 60 60 Peak Forward Current : IP [A] Peak Forward Current : IP [A] 70 50 Duty=0.1 Duty=0.2 Duty=0.5 20 10 Duty=0.8 125 150 175 Fig.8*5 Typical peak forward current derating curve IP - Tc (Per Leg, Not guaranteed) 70 30 100 Case Temperature : Tc [ºC] Fig.7*4 Maximum peak forward current derating curve IP - Tc (Per Leg) 40 75 Duty=0.1 50 Duty=0.2 40 Duty=0.5 30 20 10 Duty=0.8 D.C. D.C. 0 0 25 50 75 100 125 150 175 25 75 100 125 150 175 Case Temperature : Tc [ºC] *5 Based on typ Vf, typ RthJC Typical value, not guaranteed Valid for switching of above 10kHz, excluding D.C. curve Case Temperature : Tc [ºC] *4 Based on max Vf, max RthJC Valid for switching of above 10kHz, excluding D.C. curve. www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 50 4/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lElectrical characteristic curves 1000 Fig.10 Typical capacitance store energy (Per Leg) 10 100 Tvj=25ºC Single Pulse 10 0.00001 9 Capacitance stored energy : EC[mJ] Surge non-repetitive forward current : IFSM [A] Fig.9 Surge non-repetitive forward current vs. Pulse width (Sinusoidal waveform) (Per Leg) 8 7 6 5 4 3 2 1 0 0.0001 0.001 0.01 0 200 Pulse Width : PW [s] 400 600 800 Reverse Voltage : VR [V] lSymplified forward characteristic model (Per Leg) Fig.11 Equivalent forward current curve VF = Vth + Rdiff IF Forward Current : IF Vth ( Tvj ) = a0 + a1 Tvj Rdiff ( Tvj ) = b0 + b1 Tvj + b2 Tvj2 Symbol Vth 1/Rdiff Unit a0 9.93×10 -1 V a1 -1.27×10 -3 V/°C b0 7.30×10 -2 Ω b1 4.12×10 -4 Ω/°C b2 2.66×10 -6 Ω/°C 2 Tvj in ºC; -55 ºC < Tvj < 175 ºC ; IF < 10 A Forward Voltage : VF www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 Typical Value 5/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lPackage Dimensions Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 6/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 7/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004 Datasheet SCS210KE2 lDie Bonding Layout :Die position ・Front view of the packaging. ・Dimensions are design values. ・If the heat sink is to be installed, it should be in contact with the die bonding point. Unit: mm www.rohm.com © 2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 8/8 TSQ50215-SCS210KE2 6.May.2022 - Rev.004