SCS210KGC17

SCS210KG Datasheet SiC Schottky Barrier Diode lOutline VR 1200V IF 10A QC 34nC (1) TO-220ACG (2) lFeatures (3) lInner circuit (1) 1) Shorter recovery time 2) Reduced temperature dependence (1) Cathode (2) Cathode (3) Anode 3) High-speed switching possible (2) ●Applications (3) lPackaging specifications ・ PFC Boost Topology Packaging ・ Secondary Side Rectification Reel size (mm) - Tape width (mm) - ・ Data Center Tube Type ・ PV Power Conditioners Basic ordering unit (pcs) Packing code 50 C17 Marking SCS210KG lAbsolute maximum ratings (Tvj = 25°C unless otherwise specified.) Parameter Symbol Value Unit Reverse voltage (repetitive peak) VRM 1200 V Reverse voltage (DC) VR 1200 V IF 10 A 42 A 31 A 160 A 50 *2 A Continuous forward current Surge nonrepetitive forward current (Tc= 146°C) *1 PW=10ms sinusoidal, Tvj=25°C PW=10ms sinusoidal, Tvj=150°C PW=10ms square, Tvj=25°C IFRM Repetitive peak forward current 2 i t value IFSM PW=10ms, Tvj=25°C ∫i dt 2 PW=10ms, Tvj=150°C 2 9.0 As 4.8 As 2 Total power disspation PD 150 *1, 3 W Virtual Junction temperature Tvj 175 °C Range of storage temperature Tstg -55 to +175 °C *1 Limited by maximum Tvj and for Max. RthJC. *2 Tc=100°C, Tvj=150°C, Duty cycle=10%. *3 Tc=25°C www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 1/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lElectrical characteristics (Tvj = 25°C unless otherwise specified.) Values Parameter Symbol VDC DC blocking voltage Conditions Typ. Max. 1200 - - V IF= 10A, Tvj=25°C - 1.4 1.6 V IF= 10A, Tvj=150°C - 1.8 - V IF= 10A, Tvj=175°C - 1.9 - V VR= 1200 V,Tvj=25°C - 10 200 mA VR= 1200 V,Tvj=150°C - 80 - mA VR= 1200 V,Tvj=175°C - 130 - mA VR= 1V,f=1MHz - 530 - pF VR= 800V,f=1MHz - 43 - pF IR = 0.2mA VF Forward voltage IR Reverse current Total capacitance Unit Min. C Total capacitive charge QC VR =800V,di/dt=500A/μs - 34 - nC Switching time tC VR =800V,di/dt=500A/μs - 15 - ns Symbol Conditions lThermal characteristics Values Parameter RthJC Thermal resistance Unit - Min. Typ. Max. - 0.73 0.99 K/W lTypical Transient Thermal Characteristics Symbol Value Unit Rth1 1.92 × 10 -1 Rth2 5.39 × 10 -1 Rth3 3.91 × 10 -5 Tj PD Symbol K/W Cth1 Cth2 Unit Cth1 3.18 × 10 -3 Cth2 6.56 × 10 -3 Cth3 1.40 × 10 2 Rth,n Rth1 Value Ws/K Tc Cth,n Ta www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lElectrical characteristic curves Fig.2 VF - IF Characteristics Fig.1 VF - IF Characteristics 100 14 Pulsed 12 Forward Current : IF [A] 10 Forward Current : IF [A] Pulsed 1 0.1 0.01 Tvj increase Tvj= 175ºC 125C 75ºC 25ºC -25ºC 0.5 1.0 1.5 8 6 Tvj= 175ºC 125C 75ºC 25ºC -25ºC 4 　2 0 0.001 0.0 Tvj increase 10 2.0 0.0 2.5 Forward Voltage : VF [V] 1.0 1.5 2.0 2.5 Forward Voltage : VF [V] Fig.3 VR - IR Characteristics Fig.4 VR-Ct Characteristics 1000 10 1 0.1 0.01 Tvj increase 0.001 0 500 Capacitance Between Terminals : Ct [pF] 1000 Tvj= 175ºC 125C 75ºC 25ºC -25ºC 100 Reverse Current : IR [mA] 0.5 10 Tvj=25ºC f=1MHz 1 0.01 1000 Reverse Voltage : VR [V] www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 100 0.1 1 10 100 1000 Reverse Voltage : VR [V] 3/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lElectrical characteristic curves Fig.6 Power Dissipation 1 160 140 Power Dissipation [W] Transient Thermal Impedance : ZthJC [K/W] Fig.5 Typical Transient Thermal Impedance vs. Pulse Width 0.1 100 80 60 40 20 Tc=25ºC Single Pulse 0.01 1.E-4 120 0 1.E-3 1.E-2 1.E-1 1.E+0 1.E+1 25 50 Pulse Width : PW [s] 100 125 140 Duty increase Duty = 0.1 0.2 0.5 0.8 D.C. Peak Forward Current : IP [A] 100 175 Fig.8*5 Typical peak forward current derating curve IP - Tc (Not guaranteed) 140 120 150 Case Temperature : Tc [ºC] Fig.7*4 Maximum peak forward current derating curve IP - Tc Peak Forward Current : IP [A] 75 80 60 40 20 120 Duty increase 100 Duty = 0.1 0.2 0.5 0.8 D.C. 80 60 40 20 0 0 25 50 75 100 125 150 175 25 75 100 125 150 175 Case Temperature : Tc [ºC] *5 Based on typ Vf, typ RthJC Typical value, not guaranteed Valid for switching of above 10kHz, excluding D.C. curve Case Temperature : Tc [ºC] *4 Based on max Vf, max RthJC Valid for switching of above 10kHz, excluding D.C. curve. www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 50 4/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lElectrical characteristic curves Fig.10 Typical capacitance store energy 1000 20 Capacitance stored energy : EC[mJ] Surge non-repetitive forward current : IFSM [A] Fig.9 Surge non-repetitive forward current vs. Pulse width (Sinusoidal waveform) 100 Tvj=25ºC Single Pulse 10 0.00001 18 16 14 12 10 8 6 4 2 0 0.0001 0.001 0.01 0 200 Pulse Width : PW [s] 400 600 800 Reverse Voltage : VR [V] lSymplified forward characteristic model Fig.11 Equivalent forward current curve VF = Vth + Rdiff IF Forward Current : IF Vth ( Tvj ) = a0 + a1 Tvj Rdiff ( Tvj ) = b0 + b1 Tvj + b2 Tvj2 Vth 1/Rdiff Typical Value a0 9.93 × 10 -1 V a1 -1.27 × 10 -3 V/°C b0 3.65 × 10 -2 Ω b1 2.06 × 10 -4 Ω/°C b2 1.33 × 10 -6 Ω/°C2 Tvj in oC; -55 oC < Tvj < 175 oC ; IF < Forward Voltage : VF www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 Symbol 5/7 Unit 20 A TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lDimensions (Unit : mm) www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 6/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 SCS210KG Datasheet lDie Bonding Layout 6.96mm :Die position ・Front view of the packaging. ・Dimensions are design values. ・If the heat sink is to be installed, it should be in contact with the die bonding point. Unit: mm www.rohm.com ©2022 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 7/7 TSQ50255-SCS210KGC17 20.Nov.2022 - Rev.004 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications. 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products specified in this document are not designed to be radiation tolerant. 7) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, and power transmission systems. 8) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 10) ROHM has used reasonable care to ensure the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 11) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 12) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1107 S Datasheet General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE © 2015 ROHM Co., Ltd. All rights reserved. Rev.001