SCT3022ALGC11

SCT3022AL Datasheet N-channel SiC power MOSFET lOutline VDSS 650V RDS(on) (Typ.) 22mW ID 93A PD 339W TO-247N (1)(2)(3) lInner circuit lFeatures (1) Gate (2) Drain (3) Source 1) Low on-resistance 2) Fast switching speed *1 Body Diode 3) Fast reverse recovery 4) Easy to parallel lPackaging specifications 5) Simple to drive Packing Tube 6) Pb-free lead plating ; RoHS compliant Reel size (mm) - Tape width (mm) - Type lApplication Basic ordering unit (pcs) ・Solar inverters Taping code ・DC/DC converters 30 C11 Marking SCT3022AL ・Switch mode power supplies ・Induction heating ・Motor drives lAbsolute maximum ratings (Ta = 25°C) Parameter Drain - Source voltage Continuous drain current Value Unit VDSS 650 V Tc = 25°C ID *1 93 A Tc = 100°C ID *1 65 A ID,pulse *2 232 A VGSS -4 to +22 V -4 to +26 V 0 / +18 V Tj 175 °C Tstg -55 to +175 °C Pulsed drain current Gate - Source voltage (DC) Gate-Source Surge Voltage (tsurge < 300nsec) VGSS_surge Recommended Drive Voltage VGS_op Junction temperature Range of storage temperature www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 Symbol 1/12 *4 *3 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lThermal resistance Values Parameter Symbol RthJC Thermal resistance, junction - case Unit Min. Typ. Max. - 0.34 0.44 C/W lElectrical characteristics (Ta = 25°C) Values Parameter Drain - Source breakdown voltage Symbol V(BR)DSS Conditions Unit Min. Typ. Max. 650 - - V Tj = 25°C - 1 10 mA Tj = 150°C - 2 - VGS = 0V, ID = 1mA VDS = 650V, VGS = 0V Zero gate voltage drain current IDSS Gate - Source leakage current IGSS+ VGS = +22V, VDS = 0V - - 100 nA Gate - Source leakage current IGSS- VGS = -4V, VDS = 0V - - -100 nA 2.7 - 5.6 V - 22 28.6 mW Tj = 125°C - 29 - f = 1MHz, open drain - 5 - Gate threshold voltage VGS (th) VDS = 10V, ID = 18.2mA VGS = 18V, ID = 36A Static drain - source on - state resistance Gate input resistance www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 RDS(on) *5 Tj = 25°C RG 2/12 W TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristics (Ta = 25°C) Values Parameter Symbol Conditions Unit Min. Typ. Max. Transconductance gfs *5 VDS = 10V, ID = 36A - 12.2 - Input capacitance Ciss VGS = 0V - 2208 - Output capacitance Coss VDS = 500V - 118 - Reverse transfer capacitance Crss f = 1MHz - 52 - Effective output capacitance, energy related Co(er) VGS = 0V VDS = 0V to 300V - 303 - Turn - on delay time td(on) *5 VDD = 300V, ID = 18A - 25 - VGS = 18V/0V - 53 - td(off) *5 RL = 17W - 61 - tf *5 RG = 0W - 35 - - 252 - Rise time tr Turn - off delay time Fall time Turn - on switching loss Turn - off switching loss *5 Eon *5 Eoff *5 S pF pF ns VDD = 300V, ID=36A VGS = 18V/0V RG = 0W L=100mH *Eon includes diode reverse recovery mJ - 201 - lGate Charge characteristics (Ta = 25°C) Values Parameter Symbol Conditions Unit Min. Typ. Max. Total gate charge Qg *5 VDD = 300V - 133 - Gate - Source charge Qgs *5 ID = 36A - 31 - Gate - Drain charge Qgd VGS = 18V - 53 - VDD = 300V, ID = 36A - 9.6 - Gate plateau voltage www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 *5 V(plateau) 3/12 nC V TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lBody diode electrical characteristics (Source-Drain) (Ta = 25°C) Values Parameter Inverse diode continuous, forward current Symbol IS Conditions *1 Unit Min. Typ. Max. - - 93 A - - 232 A - 3.2 - V - 27 - ns - 146 - nC - 10 - A Tc = 25°C Inverse diode direct current, pulsed ISM *2 Forward voltage VSD *5 Reverse recovery time trr *5 Reverse recovery charge Qrr *5 Peak reverse recovery current Irrm VGS = 0V, IS = 36A IF = 36A, VR = 300V di/dt = 1100A/ms *5 *1 Limited only by maximum temperature allowed. *2 PW  10ms, Duty cycle  1% *3 Example of acceptable Vgs waveform *4 Please be advised not to use SiC-MOSFETs with Vgs below 13V as doing so may cause thermal runaway. *5 Pulsed www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 4/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.1 Power Dissipation Derating Curve Fig.2 Maximum Safe Operating Area 400 1000 Operation in this area is limited by RDS(ON) 300 100 Drain Current : ID [A] Power Dissipation : PD [W] 350 250 200 150 100 10 PW = 100µs PW = 1ms PW = 10ms 1 50 PW = 100ms Ta = 25ºC Single Pulse 0.1 0 0 50 100 150 0.1 200 Case Temperature : TC [°C] 1 10 100 1000 Drain - Source Voltage : VDS [V] Transient Thermal Resistance : Rth [K/W] Fig.3 Typical Transient Thermal Resistance vs. Pulse Width 1 0.1 0.01 Ta = 25ºC Single Pulse 0.001 0.0001 0.001 0.01 0.1 1 10 Pulse Width : PW [s] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 5/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.4 Typical Output Characteristics(I) Fig.5 Typical Output Characteristics(II) 45 90 20V 18V Drain Current : ID [A] 70 20V 40 12V 16V Drain Current : ID [A] 80 Ta = 25ºC Pulsed 14V 60 50 40 30 10V 20 18V 35 14V 16V 30 12V 25 10V 20 15 10 VGS= 8V 10 VGS= 8V 5 0 0 0 2 4 6 8 10 0 1 Drain - Source Voltage : VDS [V] 2 3 4 5 Drain - Source Voltage : VDS [V] Fig.6 Tj = 150ºC Typical Output Characteristics(I) Fig.7 Tj = 150ºC Typical Output Characteristics(II) 45 90 20V 18V 20V 80 40 18V 14V 16V 12V 60 35 50 40 30 VGS= 8V 20 Ta = 150ºC Pulsed 10 14V 10V 12V 16V 10V Drain Current : ID [A] 70 Drain Current : ID [A] Ta = 25ºC Pulsed 30 25 20 VGS= 8V 15 10 Ta = 150ºC Pulsed 5 0 0 0 2 4 6 8 0 10 Drain - Source Voltage : VDS [V] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 1 2 3 4 5 Drain - Source Voltage : VDS [V] 6/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.8 Typical Transfer Characteristics (I) Fig.9 Typical Transfer Characteristics (II) 90 100 VDS = 10V Pulsed 70 Drain Current : ID [A] 10 Drain Current : ID [A] VDS = 10V Pulsed 80 Ta= 150ºC Ta= 75ºC Ta= 25ºC Ta= -25ºC 1 0.1 60 50 Ta= 150ºC Ta= 75ºC Ta= 25ºC Ta= -25ºC 40 30 20 10 0 0.01 0 2 4 6 8 0 10 12 14 16 18 20 Gate - Source Voltage : VGS [V] 6 8 10 12 14 16 18 20 Fig.11 Transconductance vs. Drain Current 10 6 VDS = 10V ID = 18.2mA 5 VDS = 10V Pulsed Transconductance : gfs [S] Gate Threshold Voltage : V GS(th) [V] 4 Gate - Source Voltage : VGS [V] Fig.10 Gate Threshold Voltage vs. Junction Temperature 4 3 2 1 0 -50 2 1 Ta = 150ºC Ta = 75ºC Ta = 25ºC Ta = -25ºC 0.1 0 50 100 150 0.1 200 Junction Temperature : Tj [ºC] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 1 10 Drain Current : ID [A] 7/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.12 Static Drain - Source On - State Resistance vs. Gate - Source Voltage Fig.13 Static Drain - Source On - State Resistance vs. Junction Temperature 0.09 Ta = 25ºC Pulsed 0.08 0.07 0.06 0.05 ID = 62A 0.04 ID = 36A 0.03 0.02 0.01 0 6 8 10 12 14 16 18 20 22 Static Drain - Source On-State Resistance : RDS(on) [W] Static Drain - Source On-State Resistance : RDS(on) [W] 0.09 Gate - Source Voltage : VGS [V] 0.08 VGS = 18V Pulsed 0.07 0.06 0.05 0.04 ID = 62A 0.03 0.02 ID = 36A 0.01 0 -50 0 50 100 150 200 Junction Temperature : Tj [ºC] Fig.14 Static Drain - Source On - State Resistance vs. Drain Current Static Drain - Source On-State Resistance : RDS(on) [W] 0.1 Ta = 150ºC Ta = 125ºC Ta = 75ºC Ta = 25ºC Ta = -25ºC VGS = 18V Pulsed 0.01 1 10 100 Drain Current : ID [A] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 8/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.15 Typical Capacitance vs. Drain - Source Voltage Fig.16 Coss Stored Energy 25 10000 Ta = 25ºC Capacitance : C [pF] 1000 Coss Stored Energy : EOSS [mJ] Ciss Coss 100 Crss 10 Ta = 25ºC f = 1MHz VGS = 0V 20 15 10 5 0 1 0.1 1 10 100 0 1000 Drain - Source Voltage : VDS [V] 300 400 Fig.18 Dynamic Input Characteristics 10000 20 1000 Gate - Source Voltage : VGS [V] Ta = 25ºC VDD = 300V VGS = 18V RG = 0W Pulsed tf Switching Time : t [ns] 200 Drain - Source Voltage : VDS [V] Fig.17 Switching Characteristics 100 100 td(off) tr td(on) 10 1 Ta = 25ºC VDD = 300V ID = 36A Pulsed 15 10 5 0 0.1 1 10 100 0 Drain Current : ID [A] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 20 40 60 80 100 120 140 Total Gate Charge : Qg [nC] 9/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.19 Typical Switching Loss vs. Drain - Source Voltage Fig.20 Typical Switching Loss vs. Drain Current 500 2000 Switching Energy : E [mJ] 400 350 Ta = 25ºC VDD=300V VGS = 18V/0V RG=0W L=100mH 1800 Switching Energy : E [mJ] Ta = 25ºC ID=36A VGS = 18V/0V RG=0W L=100mH 450 Eon 300 250 200 Eoff 150 100 1600 1400 1200 1000 Eon 800 600 Eoff 400 200 50 0 0 100 200 300 400 0 500 Drain - Source Voltage : VDS [V] 20 40 60 80 100 Drain Current : ID [A] Fig.21 Typical Switching Loss vs. External Gate Resistance 2000 1800 Ta = 25ºC VDD=300V ID=36A VGS = 18V/0V L=100mH Switching Energy : E [mJ] 1600 1400 1200 Eon 1000 800 Eoff 600 400 200 0 0 5 10 15 20 25 30 External Gate Resistance : RG [W] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 10/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lElectrical characteristic curves Fig.22 Inverse Diode Forward Current vs. Source - Drain Voltage Fig.23 Reverse Recovery Time vs.Inverse Diode Forward Current 1000 Reverse Recovery Time : trr [ns] Inverse Diode Forward Current : IS [A] 100 VGS = 0V Pulsed 10 1 Ta = 150ºC Ta = 75ºC Ta = 25ºC Ta = -25ºC 0.1 0.01 Ta = 25ºC di / dt = 1100A / us VR = 300V VGS = 0V Pulsed 100 10 0 1 2 3 4 5 6 7 8 1 Source - Drain Voltage : VSD [V] www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 10 100 Inverse Diode Forward Current : IS [A] 11/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Datasheet SCT3022AL lMeasurement circuits Fig.1-1 Switching Time Measurement Circuit Fig.1-2　Switching Waveforms Fig.2-1 Gate Charge Measurement Circuit Fig.2-2 Gate Charge Waveform Fig.3-1 Switching Energy Measurement Circuit Fig.3-2 Switching Waveforms Eon = ID×VDS Same type device as D.U.T. VDS Irr Eoff = ID×VDS Vsurge D.U.T. ID ID Fig.4-1 Reverse Recovery Time Measurement Circuit Fig.4-2 Reverse Recovery Waveform D.U.T. www.rohm.com © 2018 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 12/12 TSQ50211-SCT3022AL 14.Jun.2018 - Rev.005 Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products specified in this document are not designed to be radiation tolerant. 7) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, and power transmission systems. 8) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 9) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 10) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 11) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 12) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 13) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102S