SCT4013DEC11

SCT4013DE Datasheet N-channel SiC power MOSFET VDSS lOutline 750V 13mΩ RDS(on) (Typ.) *1 TO-247N 105A 312W ID PD (3) (1)(2) ● Features lInner circuit 1) Low on-resistance (2) 2) Fast switching speed 3) Fast reverse recovery (1) Gate (2) Drain (3) Source *1 (1) *1 Body Diode 4) Easy to parallel 5) Simple to drive (3) Please note Driver Source and Power Source are not exchangeable. Their exchange might lead to malfunction. 6) Pb-free lead plating ; RoHS compliant lPackaging specifications ● Application Packing ・Solar inverters Reel size (mm) - Tape width (mm) - ・DC/DC converters Tube Type ・Switch mode power supplies Basic ordering unit (pcs) ・Induction heating 30 Taping code C11 Marking SCT4013DE lAbsolute maximum ratings (Tvj = 25°C unless otherwise specified.) Parameter Drain - source voltage Continuous drain and source current VGS = VGS_on Pulsed drain current VGS = VGS_on Body diode pulsed forward current Body diode surge forward current Tc = 25°C Tc = 100°C Symbol Value Unit VDSS 750 V 105 A 74 A ID, IS *1 Tc = 25°C ID,pulse *2 233 A Tc = 25°C VGS = 0 V IS,pulse *1,*3 105 A IS,pulse *1,*4 233 A VGSS_DC -4 to +21 V -4 to +23 V Gate - source voltage (DC) Gate - source surge voltage (tsurge < 300ns) VGSS_surge *5 Recommended turn-on gate - source drive voltage VGS_on *6 +15 to +18 V Recommended turn-off gate - source drive voltage VGS_off 0 V Virtual junction temperature Tvj 175 °C Range of storage temperature Tstg -40 to +175 °C www.rohm.com ©2023 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001 1/15 TSQ50211-SCT4013DE 23.Aug.2023 - Rev.004 Datasheet SCT4013DE ●Electrical characteristics (Tvj = 25°C unless otherwise specified) Values Parameter Symbol Drain - Source breakdown voltage V(BR)DSS Conditions Unit Min. Typ. Max. 750 - - Tvj = 25°C - 1 80 Tvj = 150°C - 10 - VGS = 0 V, ID = 18.6mA Tvj = 25°C V VGS = 0 V, VDS =750V Zero Gate voltage Drain current IDSS μA Gate - Source leakage current IGSS+ VGS = +21V , VDS = 0V - - 100 nA Gate - Source leakage current IGSS- VGS = -4V - - -100 nA 2.8 - 4.8 V - 13.0 16.9 mΩ Tvj = 150°C - 22.2 - f = 1MHz, open drain - 1 - , VDS = 0V VGS(th) *7 VDS = 10V, ID = 30.8mA Gate threshold voltage VGS = 18V, ID = 58A Static Drain - Source on - state resistance RDS(on) *8 Tvj = 25°C RG Gate input resistance Ω lThermal resistance Values Parameter Symbol RthJC*9 Thermal resistance, junction - case Unit Min. Typ. Max. - 0.37 0.48 K/W lTypical Transient Thermal Characteristics Symbol Value Unit Rth1 4.0 ×10 -2 Rth2 1.6 ×10 -1 Rth3 1.7 ×10 -1 K/W Tj PD Symbol Value Cth1 1.2 ×10 -3 Cth2 4.6 ×10 -3 Cth3 2.6 ×10 -2 Rth,n Rth1 Cth1 Cth2 Unit Ws/K Tc Cth,n Ta www.rohm.com ©2023 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 2/15 TSQ50211-SCT4013DE 23.Aug.2023 - Rev.004 Datasheet SCT4013DE ●Electrical characteristics (Tvj = 25°C unless otherwise specified) Values Parameter Symbol Conditions Unit Min. Typ. Max. - 32 - Transconductance gfs *8 Input capacitance Ciss VGS = 0V - 4580 - Output capacitance Coss VDS = 500V - 203 - Reverse transfer capacitance Crss f = 1MHz - 10 - Effective output capacitance, energy related Co(er) - 263 - Total Gate charge Qg *8 - 170 - - 39 - - 42 - - 20 - - 57 - VDS = 10V, ID = 58A VGS = 0V VDS = 0V to 500V VDS = 500V S pF pF ID = 58A *8 Gate - Source charge Qgs Gate - Drain charge Qgd *8 Turn - on delay time td(on) *8 VGS = 18V See Fig. 1-1, 1-2. VDS = 500V nC ID = 58A Rise time tr Turn - off delay time *8 VGS = +18V / 0V td(off) *8 tf *8 Fall time Turn - on switching loss Eon *8 Turn - off switching loss *8 RG = 6.8Ω, L = 250μH Eon includes diode reverse recovery Lσ = 50nH, Cσ = 10pF See Fig. 2-1, 2-2, 2-3. ns - 83 - - 21 - - 1100 - - 630 - - 12.0 - µs - 11.5 - µs μJ Eoff VDS ≤ 400V VGS(on) = +15V Short-circuit withstand time tsc *9 VGS(on) = +18V www.rohm.com ©2023 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 VDS,peak ≤ 750V Tvj(start) = 25°C RG = 2.2Ω 3/15 TSQ50211-SCT4013DE 23.Aug.2023 - Rev.004 Datasheet SCT4013DE lBody diode electrical characteristics (Source-Drain) (Tvj = 25°C unless otherwise specified) Values Parameter Symbol VSD *8 Forward voltage Reverse recovery time Conditions IF = 58A VR = 500V *8 Qrr Peak reverse recovery current Irrm *8 Typ. Max. - 3.3 - V - 47 - ns - 420 - nC - 18 - A VGS = 0V, IS = 58A trr *8 Reverse recovery charge Unit Min. 1700A/μs di/dt = Lσ = 50nH, Cσ = 10pF See Fig. 3-1, 3-2. *1 Limited by maximum Tvj and for Max. RthJC. *2 Pulse width and duty cycle are limited by T vj,max. *3 Only for body-diode, Repititive pulse, PW ≤ 1.5μs, Duty cycle ≤ 5% *4 When used as a protective function, PW ≤ 10μs *5 Example of acceptable VGS waveform +VGSS_surge +VGSS_DC tsurge tsurge -VGSS_DC -VGSS_surge Please note especially when using driver source that V GSS_surge must be in the range of absolute maximum rating. *6 Please be advised not to use SiC-MOSFETs with V GS below 10V as doing so may cause thermal runaway. *7 Tested after applying VGS = 21V for 100ms. *8 Pulsed *9 The value is based on TO-247 package. Single Pulsed. *10 Measured conformable to JESD51-14. See the application note "rthjc_measurement_and_usage_an-e.pdf". Link URL: https://fscdn.rohm.com/en/products/databook/applinote/discrete/common/rthjc_measurement_and_usage_an-e.pdf www.rohm.com ©2023 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001 4/15 TSQ50211-SCT4013DE 23.Aug.2023 - Rev.004 Datasheet SCT4013DE lElectrical characteristic curves Fig.1 Power Dissipation Derating Curve Fig.2 Maximum Safe Operating Area 1000 350 Operation in this area is limited by RDS(on) PW Drain Current : ID [A] Power Dissipation : PD [W] 300 250 200 150 100 100