SLA-560LT3F

CONVENTIONAL LED LAMPS High Brightness Type φ5.0 Circular Type LED Lamps〈Wide Focus Type 2θ 1/2:40°〉 SLA-560 Series Blue Green Emitting Surface Dimension (mm) Shape InGaN on Sic 468nm Circular Type Red 523nm 518nm GaP GaAlAs on GaAs 563nm 660nm(single) φ5.0 SLA560BBT SLA560BCT SLA560BDT SLA560EBT SLA560ECT SLA560EDT SLA-560MT SLA-560LT Note) "-" will be taken out for emitting color B/E series. ■ Absolute Maximum Ratings（Ta=25℃） ■ External Dimensions（Unit：mm） Peak Forward Reverse Operating Stotage forward current voltage temperature temperature current IF VR Topr Tstg IFP （mW） （mA） （V） （°C） （°C） （mA） Blue 120 SLA560EBT SLA560ECT SLA560EDT 100 -20 to +80 5 -30 to +100 4−0.6 Green 75 25 60 ＊2 100 50 75 ＊2 SLA-560MT SLA-560LT ＊1 30 1.0 SLA560BDT Red 4 □0.5 -25 to +85 ＊1:IFP measured under duty ≦1/ 10,1kHz ＊2:IFP measured under duty ≦1/ 5, pulse widht ≦1ms. ■ Electrical Optical Characteristics（Ta=25℃） Part No. Resin Color Forward voltage VF Typ. (V) IF (mA) Reverse current IR Max. (µA) VR (V) Light wavelength Typ. (nm) IF (mA) SLA560BCT SLA560EDT 468 3.5 SLA560BDT SLA560ECT Min. ( mcd) 90 SLA560BBT SLA560EBT Brightness IV Peak Half-wave λp ∆λ Typ. (nm) Transparent Clear 26 （2.5） Tolerance:±0.2 24.0Min. SLA560BCT 1.0Max. SLA560BBT (6.5) 7.5±0.3 φ5.0 2.5±1.0 Part No. φ5.6 Power Emitting dissipation color PD CATHODE ■ Directivity Typ. IF (mcd) (mA) 0° 30° 30° 220 200 600 610 2000 60° 60° 100 5 20 3.8 518 SLA-560MT 2.3 10 SLA-560LT 1.75 100 ■ Recommemded Pad Layout 523 4 36 20 35 563 40 660 25 680 610 2000 2000 5000 42 100 ■ Packaging Spacifications（Unit：mm） Packaging Bulk（3F）：1000pcs/Box 1.0 ±0.1 2.0 2.5 70 170 100 （Unit：mm） 300 20 90° 100 50 0 50 90° 100 Relative Luminous Intensity (%) (TYP.) CONVENTIONAL LED LAMPS ■ Electrical Characteristic Curves Forward Current - Forward Voltage SLA-560MT SLA560BBT 100 SLA560EBT SLA560ECT SLA560EDT 10 3.5 FORWARD VOLTAGE : V 20 10 5.0 2.0 1.0 1 2.5 SLA-560LT Ta=25℃ FORWARD CURRENT : IF (mA) SLA560BDT FORWARD CURRENT : mA 50 SLA560BCT 4.5 1.5 2.0 2.5 3.0 FORWARD VOLTAGE : VF (V) Relative Luminous Intensity - Case Temperature SLA560BBT RELATIVE LUMINOUS INTENSITY IF=20mA 1.4 SLA560BDT SLA560EBT 1.2 SLA560ECT SLA560EDT 1.0 0.8 0.6 0.4 -20 -10 0 SLA-560MT 1.4 SLA560BCT RELATIVE LUMINOUS INTENSITY 1.6 SLA-560LT 1.2 1.0 0.8 0.6 0.4 −20 10 20 30 40 50 60 70 80 CASE TEMPERATURE : Tc (℃) 0 20 40 60 80 CASE TEMPERATURE : Tc (℃) Relative Luminous Intensity - Forward Current SLA560BBT RELATIVE LUMINOUS INTENSITY:(%) SLA560BDT SLA560EBT SLA560ECT 100 SLA-560MT 5 SLA560BCT SLA560EDT 50 RELATIVE LUMINOUS INTENSITY f=1kHz 150 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0 0 SLA-560LT Ta=25℃ 1 10 30 20 PEAK FORWARD CYRRENT : (mA) 5 2 10 20 50 100 FORWARD CURRENT : IF (mA) Ratio of Maximum Tolerable Peak Current - Pulse Duration SLA-560MT SLA560BBT 6 SLA560BCT 10 100 1000 5 10 20 100Hz 200Hz 1kHz 500Hz 103 100kHz 200kHz 1kHz 2kHz 5kHz 50 102 500kHz 2kHz 5kHz 10kHz 20kHz 1 10000 PULSE DURATION : Tw (μs) 10kHz 2 1.5 1 1 50kHz 3 2.4 20kHz SLA560EDT 3.3 IFP Max / IF Max 100Hz 1kHz 300Hz 3kHz 10kHz IFP Max / IF Max 4 SLA560EBT SLA560ECT SLA-560LT 5 SLA560BDT 50kHz 10 104 PULSE DURATION : Tw (μs) MAXIMUM FORWARD CURRENT : IF Max. (mA) SLA560BBT SLA560BCT 40 SLA560BDT SLA560EBT 30 SLA560ECT SLA560EDT 20 10 0 -20 -10 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (℃) MAXIMUM FORWARD CURRENT : IF Max. (mA) Derating SLA-560MT SLA-560LT 60 50 40 30 20 10 0 -25 -20 -10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (℃) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1