SLA-570LT3F

SLA-560 / SLA-570 / SLA-580 Series LED lamps High bright circular LED lamps (φ5.0mm) SLA-560 / SLA-570 / SLA-580 Series The SLA-560, SLA-570 and SLA-580 series are high luminance LEDs which give you a choice of narrow to wide viewing angles. One red type and one green type are available in three packages for a total of six different types, and they suitable for use in a wide variety of applications. !External dimensions (Units : mm) φ5.6 CATHODE 0.5 (2.5) 1.0 CATHODE 2.5±1.0 24.0Min. 2.5±1.0 (2.5) 4−0.6 2.5±1.0 24.0Min. 4−0.6 24.0Min. 4−0.6 0.5 (7.5) 8.5±0.3 (7.65) 8.65±0.3 φ5.0 1.0 1.0 (6.5) 7.5±0.3 φ5.0 1.0Max. φ5.0 1.0Max. SLA-580 φ5.6 SLA-570 φ5.6 SLA-560 1.0Max. !Features 1) Very bright. 2) High reliability. 0.5 (2.5) CATHODE Tolerances are ±0.2 unless otherwise noted: !Selection guide Emitting color Single-hetero GaAlAs (red) GaP (green) Narrow tupe SLA-580LT3F SLA-580MT3F Medium tupe SLA-570LT3F SLA-570MT3F Wide viewng tupe SLA-560LT3F SLA-560MT3F Lens SLA-560 / SLA-570 / SLA-580 Series LED lamps !Absolute maximum ratings (Ta = 25°C) Red Green Symbol SLA-560LT3F SLA-570LT3F SLA-580LT3F SLA-560MT3F SLA-570MT3F SLA-580MT3F Unit Power dissipation PD 100 75 mW Forward current IF 50 25 mA Peak forward current IFP 75 60 mA VR 4 Parameter Reverse voltage V 4 −25~+85 °C Tstg −30~+100 °C − 260°C 5 seconds maximum − Operating temperature Topr Storage temperature Soldering temperature !Electrical and optical characteristics (Ta = 25°C) Red Parameter Symbol Conditions Min. Typ. Max. Min. Typ. Max. Unit Forward voltage VF IF=20mA − 1.75 2.5 − 2.2 3.0 V Reverse current IR VR=4V − − 100 − − 10 µA Peak wavelength λP IF=20mA − 660 − − 563 − nm ∆λ IF=20mA − 25 − − 40 − nm − deg Spectral line half width SLA-560 SLA-570 Viewing angle 40 − 2θ 1/2 − SLA-580 25 40 − − 10 !Luminous intensity vs. wavelength 25 10 !Luminous intensity 1.0 Axial Luminous Intensity Green Color λP Type 42 100 − 660 SLA-560LT3F SLA-570LT3F 90 220 − SLA-580LT3F 200 470 − SLA-560MT3F SLA-570MT3F 42 100 − 42 185 − SLA-580MT3F 200 470 − 0.8 Red Green 0.6 Red 0.4 Green 0.2 0 500 550 600 650 Wavelength : λP (nm) Fig.1 700 563 Min. Typ. Max. Unit Note : 1. Measured at IF=20mA 2. The specification is subject to be without notice. 750 We would like you to refer to the latest specification in use. mcd SLA-560 / SLA-570 / SLA-580 Series LED lamps !Directional pattern ANGLE (˚) 20 0 10 ANGLE (˚) 10 20 20 30 40 40 SLA-560 50 40 70 80 80 90 100 90 100 50 60 70 80 80 50 60 70 70 0 30 SLA-570 50 60 50 20 40 60 90 100 10 30 30 50 0 10 50 0 90 100 50 RELATIVE LUMINOUS INTENSITY (%) RELATIVE LUMINOUS INTENSITY (%) Fig.2 SLA-560 Directional patterm Fig.3 SLA-570 Directional patterm ANGLE (˚) 10 20 0 10 20 30 30 40 40 50 50 60 60 SLA-580 70 70 80 80 90 100 50 0 90 100 50 RELATIVE LUMINOUS INTENSITY (%) Fig.4 SLA-580 Directional patterm !Electrical characteristic curves 1 (red) 10 5.0 2.0 1.0 0.5 0.2 0.1 1.0 1.5 2.0 2.5 3.0 RELATIVE LUMINOUS INTENSITY 20 5 1.4 Ta=25˚C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 1.2 1.0 0.8 0.6 0.4 −20 0 20 40 60 80 Ta=25˚C 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.2 0.5 1 2 5 10 20 50 100 FORWARD VOLTAGE : VF (V) CASE TEMPERATURE : Tc (˚C) FORWARD CURRENT : IF (mA) Fig.5 Forward current vs. forward voltage Fig.6 Luminous intensity vs. case temperature Fig.7 Luminous intensity vs. forward current SLA-560 / SLA-570 / SLA-580 Series 4 100kHz 200kHz 1kHz 2kHz 5kHz 10kHz 1.5 20kHz 2 500kHz 3 RELATIVE LUMINOUS INTENSITY 5 f=1kHz 2.5 1.5 50 102 103 DF=50% 1.0 20% 15% 10% 5% 0.5 0 0 1 5 10 20 DC 2.0 104 10 20 30 40 50 60 MAXIMUM FORWARD CURRENT : IF Max. (mA) 3.0 6 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT LED lamps 70 60 50 40 30 20 10 0 20 PEAK FORWARD CURRENT : IF peak (mA) PULSE DURATION : Tw (µs) Fig.9 Luminous intensity vs. peak forward current Fig.8 Maximum tolerable peak current vs. pulse duration 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (°C) Fig.10 Maximum forward current vs. ambient temperature (Derating) !Electrical characteristic curves 2 (green) 10 5.0 2.0 1.0 0.5 0.2 2.0 2.5 3.0 1.2 1.0 0.8 0.6 0.4 −20 0 20 40 60 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.1 0.2 80 0.5 1 2 5 10 20 50 100 CASE TEMPERATURE : Tc (˚C) FORWARD CURRENT : IF (mA) Fig.11 Forward current vs. forward voltage Fig.12 Luminous intensity vs. case temperature Fig.13 Luminous intensity vs. forward current 6 DC 3.0 RELATIVE LUMINOUS INTENSITY 5 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 3 2.4 10kHz 4 2 1 5 10 20 50 102 103 104 PULSE DURATION : Tw (µs) Fig.14 Maximum tolerable peak current vs. pulse duration DF=50% f=1kHz 2.5 2.0 1.5 20% 15% 1.0 10% 0.5 5% 0 0 10 20 30 40 50 60 PEAK FORWARD CURRENT : IF peak (mA) Fig.15 Luminous intensity vs. peak forward current MAXIMUM FORWARD CURRENT : IF Max. (mA) FORWARD VOLTAGE : VF (V) 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 1.5 Ta=25˚C RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY 20 0.1 1.0 5 1.4 Ta=25˚C 20kHz FORWARD CURRENT : IF (mA) 50 30 20 10 0 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (˚C) Fig.16 Maximum forward current vs. ambient temperature (Derating) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0