SLA-580

CONVENTIONAL LED LAMPS High Brightness Type φ5 Circular Type LED Lamps〈Focus Type 2θ 1/2:12° 〉 SLA-580 Series Blue Shape Emitting Surface Dimension (mm) 468nm InGaN on SiC 523nm 518nm Green GaP 563nm Red GaAlAs on GaAs 660nm(single) Circular Type φ5.0 SLA580BBT SLA580BCT SLA580BDT SLA580EBT SLA580ECT SLA580EDT SLA-580MT SLA-580LT Note) "-" will be taken out for emitting color B/E series. ■ Absolute Maximum Ratings（Ta=25℃） Emitting dissipation color PD ■ External Dimensions（Unit：mm） φ5.6 φ5.0 1.0Max. 4−0.6 2.5±1.0 24.0Min. （2.5） CATHODE 0° 30° 30° Part No. Peak Forward Reverse Operating Stotage forward current voltage temperature temperature current IF VR Topr Tstg IFP （mW） （mA） （V） （°C） （°C） （mA） Power SLA580BBT SLA580BCT SLA580BDT SLA580EBT SLA580ECT SLA580EDT SLA-580MT SLA-580LT Red Green 75 100 25 50 60＊2 75＊2 4 -25 to +85 Blue 120 30 100＊1 5 -20 to +80 -30 to +100 □0.5 ＊1: IFP measured under duty ≦1/ 10,1kHz ＊2: IFP measured under duty ≦1/ 5,pulse width ≦1ms. ■ Electrical Optical Characteristics（Ta=25℃） Forward voltage VF Typ. (V) SLA580BBT SLA580BCT SLA580BDT SLA580EBT SLA580ECT SLA580EDT SLA-580MT SLA-580LT 3.5 468 100 20 3.8 2.3 1.75 10 100 4 5 523 518 563 660 26 36 35 40 25 IF (mA) Tolerance:±0.2 Part No. Resin Color Reverse current IR Max. (µA) VR (V) Light wavelength Peak Half-wave ∆λ λp Typ. (nm) Typ. (nm) IF (mA) Brightness IV Min. ( mcd) ■ Directivity Typ. IF (mcd) (mA) 1500 2500 60° 610 900 1.0 (7.5) 8.5±0.3 60° 1350 4000 2000 4500 20 3000 8000 4700 15000 200 470 20 90° 100 50 0 50 90° 100 Transparent Clear Relative Luminous Intensity (%) (Typ.) ■ Recommemded Pad Layout ■ Packaging Spacifications（Unit：mm） Packaging Bulk 3F） （ ：1000pcs/Box 1.0 ±0.1 2.0 2.5 70 170 100 （Unit：mm） CONVENTIONAL LED LAMPS ■ Electrical Characteristic Curves Forward Current - Forward Voltage SLA580BBT 100 SLA-580MT 50 SLA580BCT FORWARD CURRENT : IF (mA) Ta=25℃ SLA-580LT SLA580BDT FORWARD CURRENT : (mA) SLA580EBT SLA580ECT SLA580EDT 10 20 10 5.0 1 2.5 3.5 FORWARD VOLTAGE : V 4.5 2.0 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGE : VF (V) Relative Luminous Intensity - Case Temperature 1.4 SLA580BBT RELATIVE LUMINOUS INTENSITY IF=20mA SLA-580MT 1.4 IF=20mA 1.2 RELATIVE LUMINOUS INTENSITY SLA580BCT SLA580BDT SLA580EBT SLA-580LT 1.2 1.0 SLA580ECT SLA580EDT 1.0 0.8 0.8 0.6 0.6 0.4 -20 0 20 40 60 80 CASE TEMPERATURE : Tc (℃) 0.4 −20 0 20 40 60 80 CASE TEMPERATURE : Tc (℃) Relative Luminous Intensity - Forward Current SLA580BBT 1.5 SLA-580MT 5 RELATIVE LUMINOUS INTENSITY 2 1 0.5 0.2 0.1 0.05 0.02 0.01 1 2 5 10 20 50 100 Ta=25℃ SLA580BCT f=1kHz SLA-580LT RELATIVE LUMINOUS INTENSITY SLA580BDT SLA580EBT 1 SLA580ECT SLA580EDT 0.5 0 0 10 30 20 PEAK FORWARD CYRRENT : (mA) FORWARD CURRENT : IF (mA) Ratio of Maximum Tolerable Peak Current - Pulse Duration 10 SLA580BBT SLA580BCT SLA580BDT 10kHz 100Hz 300Hz SLA-580MT 6 5 4 500Hz 200Hz IFP Max / IF Max 3 2.4 2 50kHz 20kHz 10kHz 5kHz 2kHz 1.5 1kHz 100Hz 50kHz 20kHz 10kHz 5kHz 2kHz 1kHz SLA-580LT SLA580EBT SLA580ECT SLA580EDT IFP Max / IF Max 3kHz 3.3 1kHz 500kHz 200kHz 1 1 10 100 1000 10000 1 5 10 20 2 50 10 103 PULSE DURATION : Tw (μs) PULSE DURATION : Tw (μs) Derating MAXIMUM FORWARD CURRENT : IF Max. (mA) 40 SLA580BCT SLA580BDT MAXIMUM FORWARD CURRENT : IF Max. (mA) SLA580BBT 100kHz 104 SLA-580MT 60 50 40 30 20 10 0 -25 -20 -10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (℃) SLA-580LT 30 SLA580EBT SLA580ECT SLA580EDT 20 10 0 -20 -10 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (℃) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1