Data Sheet
SLR-325 Series
Features ・ Viewing angle 2θ 1/2 : 40° ・ Lead pitch 5mm
Color Type
V
D
Y
M
Specifications
Viewing angle 2θ 1/2 / 40
: Standard
Chip Structure Absolute Maximum Ratings (Ta=25℃) Electrical and Optical Characteristics (Ta=25℃) Emitting Forward Voltage VF Reverse Current IR Dominant Wavelength Luminous Intensity IV Power Forward Peak Forward Reverse Operating Storage Color Dissipation Current Current Voltage Temperature Temperature λD Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) Typ.(nm) IF(mA) (mcd) (mcd) IF(mA) Red GaAsP on GaP 2 Orange Yellow GaP Yellowish Green Red GaAsP on GaP 2 Orange Yellow GaP Yellowish Green 2.1 75 25 572 5.6 16 *1:Duty1/5, 200Hz *SLR-325 series are only available as straight lead types 60 20 605 587 2.2 6.3 2.1 75 25 60※ 3 -25 to +85 -30 to +100 10 10 3 630 3.6 10 572 10 9 25 10 60 20 605 587 5.6 16 630
Part No.
■ SLR-325VC ■ SLR-325DC ■ SLR-325YC ■ SLR-325MC ■ SLR-325VR ■ SLR-325DU ■ SLR-325YY ■ SLR-325MG
Dimensions
Recommended Solder Pattern
Viewing Angle
3.8
φ6.0 φ3.2
1.0 ±0.1 2.0
SCANNING ANGLE (deg) Directivity (deg)
20° 30° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 0 50 90° 100
5.5
40° 50°
Diffused Clear
2.5 or 5.0
60° 70° 80°
18Min.
90° 100
RELATIVE INTENSITY (%)
RELATIVE INTENSITY (%)
□0.4
(5.0)
Cathode
Tolerance : ±0.2 (unit : mm)
(unit : mm)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/2
2010.06 - Rev.A
SLR-325 Series
Electrical Characteristics Curves Forward Current-Forward Voltage
50 FORWARD CURRENT:IF (mA) Ta=25°C
■ ■ ■
10
■
■SLR-325VC ■SLR-325VR ■SLR-325DC ■SLR-325DU ■SLR-325YC ■SLR-325YY ■SLR-325MC ■SLR-325MG
1.0
0.1 1.0
1.5
2.0
2.5
3.0
FORWARD VOLTAGE:VF (V)
Luminous Intensity-Atmosphere Temperature
IF=10mA RELATIVE LUMINOUS INTENSITY (a.u.) 1.4
1.2
■
1.0
■SLR-325VC ■SLR-325VR ■SLR-325DC ■SLR-325DU ■SLR-325YC ■SLR-325YY ■SLR-325MC ■SLR-325MG
0.8
0.6
0.4 -40
-20
0
20
40
60
80
100
ATMOSPHERE TEMPERATURE:Tc (°C)
Luminous Intensity-Forward Current
RELATIVE LUMINOUS INTENSITY (a.u.)
10 Ta=25°C
■ ■ ■ ■
■SLR-325VC ■SLR-325VR ■SLR-325DC ■SLR-325DU ■SLR-325YC ■SLR-325YY ■SLR-325MC ■SLR-325MG
1
0.1 0.1
1
10
100
FORWARD CURRENT:IF (mA)
Derating
MAXIMUM FORWARD CURRENT:IF Max. (mA)
■
30
■
20
■SLR-325VC ■SLR-325VR ■SLR-325DC ■SLR-325DU ■SLR-325YC ■SLR-325YY ■SLR-325MC ■SLR-325MG
10
0 -40
-20
0
20
40
60
80
100
AMBIENT TEMPERATURE:Ta (°C)
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/2
2010.06 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved.
R1010A
很抱歉,暂时无法提供与“SLR-325YY”相匹配的价格&库存,您可以联系我们找货
免费人工找货