SML-011DT

Data Sheet SML-01 Series 3020 1208） （ 3.0×2.0mm t=1.3mm） （ Features ・ Reflector type (3.0×2.0mm, t=1.3mm) ・ eflector improved the concentration of viewing angle and R luminous intensity to the front direction Color Type V M U P D E Y B W WB Specifications Part No. ■ SML-012VT(A) ■ SML-012V8T ■ SML-013UT Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min. Typ. Min.*2 Typ. Max.*2 PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) 75 54 75 Red 54 75 30 20 30 20 30 20 100＊1 75 30 -40 to +100 2 10 -40 to +100 -40 to +85 -30 to +85 -40 to +85 -40 to +100 -40 to +85 2 2.2 2 2.2 615 2 22 54 Orange AIGaInP on GaAs 2.2 602 605 608 63 36 22 140 54 Yellow 75 30 -40 to +100 2 22 Yellowish Green Green 62 Bluish Green InGaN on SiC 84 3.2 78 20 Blue 84 3.2 White (x, y) (0.30, 0.30) 25 569 54 20 60＊1 -40 to +85 -40 to +100 2.2 557 560 2.1 3.3 520 525 535 56 100 ＊1 626 630 625 619 624 636 635 629 35.5 25 90 40 71 63 220 100 100 63 160 100 63 280 100 250 100 63 40 6.3 18 360 140 250 100 36 900 20 ■ SML-012U8T ■ SML-012UT ■ SML-011UT ■ SML-012D8T ■ SML-012DT ■ SML-011DT ■ SML-012WT(A) ■ SML-012Y8T ■ SML-013YT ■ SML-012YT ■ SML-011YT ■ SML-012M8T ■ SML-012P8T ■ SML-012PT(A) ■ SML012ECT ■ SML012EC4T ■ SML013BDT ■ SML012BCT ■ SML012BC4T ■ SML013WBDW 620 625 36 20 -40 to +85 5 -40 to +100 2.2 2.1 20 5 587 590 593 20 40 100 36 572 575 563 564 16 2.5 9 140 558 90 -30 to +85 3.3 100 465 470 475 36 22 360 Dimensions 3.0 2.3 0.3 1.3 0.5 Recommended Solder Pattern Viewing Angle ANGULAR DISPLACEMENT (deg) ＊ 1:Duty1/10, 1kHz / ＊ 2:Reference SML-01 Series / SML-01 A） eries / SML-012 Series （S Directivity (deg) 20° 30° 40° 50° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 0 50 90° 100 ANGULAR DISPLACEMENT (deg) X’ Y’ Directivity (deg) 20° 10° 0° 10° 20° 1.6 X Y 30° 40° 50° 30° 40° 50° 60° 70° 80° 2.0 1.6 1.45 60° 70° 80° 60° 70° 80° 90° 100 50 0 50 Cathode mark 1.5 90° 100 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) SML-013 UT / YT Y’ SML-013BDT / WBDW SCANNING ANGLE (deg) Directivity (deg) Y Y’ X SCANNING ANGLE (deg) Y Directivity (deg) 20° 10° 0° 10° 20° X 20° 30° 40° 50° 60° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 30° 30° 50° 60° 70° 80° X’ 1.45 X’ 40° 50° 60° 70° 80° 40° 1.7 70° 80° 90° 100 50 0 50 Terminal 1.6 Tolerance : ±0.2 （unit : mm） （unit : mm） 90° 100 50 0 50 90° 100 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 1/2 2010.06 - Rev.A SML-01 series Electrical Characteristics Curves Forward Current-Forward Voltage 100 Ta=25°C ■ ■ ■ ■ FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) ■SML-012V8T ■SML-012U8T ■SML-013UT ■SML-012D8T ■SML-012Y8T ■SML-012M8T ■SML-012P8T ■SML-013YT 100 Ta=25°C ■ ■ 10 10 ■ ■SML-012VT(A) ■SML-012WT(A) ■SML-012UT ■SML-011UT ■SML-012DT ■SML-011DT ■SML-012YT ■SML-011YT ■SML-012PT(A) 100 Ta=25°C ■ ■SML012ECT ■SML012BCT ■SML012EC4T ■SML012BC4T ■SML013BDT ■ SML013WBDW 10 1 1.5 2.0 2.5 1 1.5 2.0 2.5 1 2.5 3.0 3.5 FORWARD VOLTAGE：VF (V) FORWARD VOLTAGE：VF (V) FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.6 IF=20mA ■ RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 1.4 1.2 1.0 0.8 0.6 0.4 -40 RELATIVE LUMINOUS INTENSITY (a.u.) ■ ■SML-012V8T ■SML-012U8T ■SML-012D8T ■SML-012Y8T ■SML-012M8T ■SML-012P8T ■SML-013UT ■SML-013YT 1.6 IF=20mA ■ ■SML-012VT(A) ■SML-012WT(A) ■SML-012PT(A) ■SML-012UT ■SML-011UT ■SML-012DT ■SML-011DT ■SML-012YT ■SML-011YT 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA ■ ■SML012ECT ■SML012BCT ■SML012EC4T ■SML012BC4T ■SML013BDT ■ SML013WBDW -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current 2.0 Ta=25°C ■ ■ ■ RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) 1.5 ■ 1.0 ■SML-012V8T ■SML-012U8T ■SML-012D8T ■SML-012Y8T ■SML-012M8T ■SML-012P8T ■SML-013UT ■SML-013YT ■ 1.6 1.2 0.8 ■ ■SML-012VT(A) ■SML-012UT ■SML-011UT ■SML-012DT ■SML-011DT ■SML-012WT(A) ■SML-012YT ■SML-011YT ■SML-012PT(A) 1.2 1.0 0.8 0.6 0.4 0.2 0.1 Ta=25°C ■ ■SML012ECT ■SML012BCT ■SML012EC4T ■SML012BC4T ■SML013BDT ■ SML013WBDW 0.5 0.4 0 0 5 10 15 20 25 30 0 0 10 20 30 0 5 10 15 20 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) Derating ■ MAXIMUM FORWARD CURRENT：IF (mA) 40 MAXIMUM FORWARD CURRENT IF：(mA) MAXIMUM FORWARD CURRENT：IF (mA) 30 ■ 20 ■SML-012V8T ■SML-012U8T ■SML-012D8T ■SML-012Y8T ■SML-012M8T ■SML-012P8T ■SML-013UT ■SML-013YT ■ 40 30 20 ■SML-012VT(A) ■SML-012WT(A) ■SML-012UT ■SML-011UT ■SML-012DT ■SML-011DT ■SML-012YT ■SML-011YT ■SML-012PT(A) ■ 40 30 ■SML012ECT ■SML012BCT ■SML012EC4T ■SML012BC4T ■SML013BDT ■ SML013WBDW 20 10 10 10 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) AMBIENT TEMPERATURE：Ta (°C) AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 2/2 2010.06 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A