SML-020MLTT86

SML-020 Series Light Emitting Diodes Two-color chip LEDs with reflectors SML-020 Series !External dimensions (Units : mm) Other Color 3.0 1.3 0.5 !Features 1) Reflectors are used to achieve a high luminance. 2) Two-color emission, rectangular and leadless (3×2.5 mm). 3) Can be mounted by automatic mounting. 4) Available on tape 2.1 2.3 2.5 The SML-020 series are two-color, high luminance chip LEDs with reflectors. Two-color chips are built into a single package. These LEDs are compact and leadless to allow a high mounting density. Cathode mark 0.8 Green or Pure Green 1.5 Green or Pure Green Other color 1.0 Electrode Tolerances are ±0.2 unless otherwise noted: !Selection guide Emitting color Red Green Lens Transparent clear Orange Green Yellow Green Orange Pure Green SML-020MVT SML-020MLT SML-020MDT SML-020MYT SML-020PDT !Absolute maximum ratings (Ta=25°C) Parameter Limits Symbol Unit MLT MVT MDT MYT PDT PD 60 ← ← ← ← mW/chip Forward current IF Other Color IF Green 30 25 ← ← ← mA Peak forward current IFP Other Color IFP Green 75 60 ← ← ← mA* VR 4 ← ← ← ← V Operating temperature Topr −30~+85 ← ← ← ← ˚C Storage temperature Tstg −40~+85 ← ← ← ← ˚C Power dissipation Reverse voltage 25 60 ∗ Pulse width 1ms Duty 1 / 5 1/6 SML-020 Series Light Emitting Diodes !Electrical and optical characteristics (Ta=25°C) Parameter Color VF (V) Type Typ. SML-020MVT SML-020MLT SML-020MDT SML-020MYT SML-020PDT Reverse current Forward voltage Cond. IR (µA) Cond. Max. IF (mA) Peak wavelength Luminous intensity Max. VR (V) Spectral line half width Cond. lP (nm) Cond. Dl (nm) Cond. IV (mcd) Min. Typ. IF (mA) Typ. IF (mA) Typ. IF (mA) V Red 2.0 2.8 3.6 6.3 650 40 M Green 2.2 2.8 9.0 20 570 40 L Red 1.75 2.5 9.0 16 660 25 M Green 2.2 2.8 9.0 20 570 40 D Orange 2.0 2.8 5.6 10 610 20 570 40 20 100 4 20 40 20 M Green 2.2 2.8 9.0 Y Yellow 2.1 2.8 3.6 6.3 585 40 M Green 2.2 2.8 9.0 20 570 40 D Orange 2.0 2.8 5.6 10 610 40 P Pure Green 2.2 2.8 2.2 4.0 555 40 20 !Directional pattern ANGLE (˚) ANGLE (˚) Other Color 20 Green Other Color 10 0 Green 10 20 30 Green 30 40 40 0 30 40 50 70 80 80 90 100 50 60 70 80 80 50 Green, Red 60 70 70 90 100 20 50 60 60 10 40 50 50 0 10 20 30 Red 90 100 50 0 90 100 50 RELATIVE LUMINOUS INTENSITY (%) RELATIVE LUMINOUS INTENSITY (%) Fig. 1 Directional pattern (1) Fig. 2 Directional pattern (2) !Electrical characteristics1 (SML-020MVT) Green Red 10 5.0 2.0 1.0 0.5 0.2 0.1 IF=20mA 1.4 Red 1.2 Green 1.0 0.8 0.6 RELATIVE LUMINOUS INTENSITY 20 5 1.6 Ta=25˚C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 Ta=25˚C 2 1 0.5 0.2 Green 0.1 Red 0.05 0.02 0.01 0.4 1.5 2.0 2.5 FORWARD VOLTAGE : VF (V) Fig. 3 Forward current Fig. 3 vs. forward voltage 3.0 -20 0 20 40 60 80 CASE TEMPERATURE : Tc (˚C) Fig. 4 Luminous intensity vs. case temperature 0.5 1 2 5 10 20 50 100 FORWARD CURRENT : IF (mA) Fig. 5 Luminous intensity vs. forward current 2/6 SML-020 Series RED,GREEN 3.0 RELATIVE LUMINOUS INTENSITY 5 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 3 2.4 20kHz 4 2 f=1kHz 2.5 DC 2.0 50 102 103 DF=50% 1.5 1.0 20% 15% 0.5 1 5 10 20 MAXIMUM FORWARD CURRENT : IF Max. (mA) 6 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT Light Emitting Diodes 10% 5% 0 0 104 PULSE DURATION : Tw (µs) 10 20 30 40 50 60 30 Red, Green 20 10 0 0 10 20 30 40 50 60 70 80 90 PEAK FORWARD CURRENT : IF peak (mA) AMBIENT TEMPERATURE : Ta (˚C) Fig. 7 Luminous intensity vs. peak forward current Fig. 8 Maximum forward current vs. ambient temperature Fig. 6 Maximum tolerable peak current vs. pulse duration !Electrical characteristics2 (SML-020MLT) Green Red 10 5.0 2.0 1.0 0.5 0.2 0.1 1.4 Green 1.2 1.0 0.8 0.6 Ta=25˚C 2 1 Red Green 0.5 0.2 0.1 0.05 0.02 0.01 0.4 2.5 -20 3.0 Fig. 9 Forward current Fig. 3 vs. forward voltage 1 10 20 50 102 103 60 80 0.5 104 PULSE DURATION : Tw (µs) Fig. 12 Maximum tolerable peak current vs. pulse duration 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 2 1 10 20 50 102 103 5 10 20 50 100 GREEN 3.0 4 5 2 Fig. 11 Luminous intensity vs. forward current 5 3 2.5 1 FORWARD CURRENT : IF (mA) RELATIVE LUMINOUS INTENSITY 2 5 40 RED 6 50kHz 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 50kHz 4 RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 5 3 2.4 20 Fig. 10 Luminous intensity vs. case temperature GREEN 6 0 CASE TEMPERATURE : Tc (˚C) 10kHz 2.0 FORWARD VOLTAGE : VF (V) 20kHz 1.5 RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT IF=20mA Red RELATIVE LUMINOUS INTENSITY 20 5 1.6 Ta=25˚C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 104 PULSE DURATION : Tw (µs) Fig. 13 Maximum tolerable peak current vs. pulse duration f=1kHz 2.5 DC 2.0 DF=50% 1.5 1.0 20% 15% 0.5 0 0 10% 5% 10 20 30 40 50 60 PEAK FORWARD CURRENT : IF peak (mA) Fig. 14 Luminous intensity vs. peak forward current 3/6 SML-020 Series Light Emitting Diodes RELATIVE LUMINOUS INTENSITY MAXIMUM FORWARD CURRENT : IF Max. (mA) RED 3.0 f=1kHz 2.5 DC 2.0 1.5 DF=50% 1.0 20% 15% 10% 5% 0.5 0 0 10 20 30 40 50 60 30 Red 20 Green 10 0 0 10 PEAK FORWARD CURRENT : IF peak (mA) 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (˚C) Fig. 16 Maximum forward current vs. ambient temperature Fig. 15 Luminous intensity vs. peak forward current !Electrical characteristics3 (SML-020MDT) Green 10 5.0 2.0 1.0 0.5 0.2 0.1 2.0 2.5 1.4 Green 1.2 Orange 1.0 0.8 0.6 -20 RELATIVE LUMINOUS INTENSITY 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 4 2 1 103 0 20 60 40 0.05 0.02 0.01 80 0.5 104 PULSE DURATION : Tw (µs) Fig. 20 Maximum tolerable peak current vs. pulse duration f=1kHz DC 2.0 DF=50% 1.0 20% 15% 0.5 0 0 10% 5% 10 20 30 40 50 5 2 10 20 50 100 Fig. 19 Luminous intensity vs. forward current 2.5 1.5 1 FORWARD CURRENT : IF (mA) Orange,Green 3.0 5 Orange Green 0.1 Fig. 18 Luminous intensity vs. case temperature 6 50 102 0.2 CASE TEMPERATURE : Tc (˚C) Fig. 17 Forward current Fig. 3 vs. forward voltage 5 10 20 1 0.5 0.4 3.0 FORWARD VOLTAGE : VF (V) 3 2.4 Ta=25˚C 2 60 MAXIMUM FORWARD CURRENT : IF Max. (mA) 1.5 IF=20mA RELATIVE LUMINOUS INTENSITY 20 Orange 5 1.6 Ta=25°C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 30 Orange, Green 20 10 0 0 10 20 30 40 50 60 70 80 90 PEAK FORWARD CURRENT : IF peak (mA) AMBIENT TEMPERATURE : Ta (˚C) Fig. 21 Luminous intensity vs. peak forward current Fig. 22 Maximum forward current vs. ambient temperature 4/6 SML-020 Series Light Emitting Diodes !Electrical characteristics4 (SML-020MYT) 5.0 2.0 Green 1.0 0.5 0.2 0.1 1.5 2.0 2.5 1.4 1.2 1.0 Green 0.8 Yellow 0.6 -20 RELATIVE LUMINOUS INTENSITY 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 4 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 5 2 20 60 40 0.2 0.1 0.05 0.02 0.01 0.5 80 3 104 DC 2.0 DF=50% 1.0 20% 15% 0.5 10% 5% 10 20 30 40 50 60 20 50 100 20 Green Yellow 10 0 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (˚C) Fig. 28 Maximum forward current vs. ambient temperature Fig. 27 Luminous intensity vs. peak forward current Fig. 26 Maximum tolerable peak current vs. pulse duration 10 30 PEAK FORWARD CURRENT : IF peak (mA) PULSE DURATION : Tw (µs) 5 2 Fig. 25 Luminous intensity vs. forward current f=1kHz 1.5 1 FORWARD CURRENT : IF (mA) 2.5 0 0 1 10 0 Yellow, GREEN 3.0 10 20 50 10 Green 0.5 Fig. 24 Luminous intensity vs. case temperature 6 5 Yellow 1 CASE TEMPERATURE : Tc (˚C) Fig. 23 Forward current Fig. 3 vs. forward voltage 2 Ta=25˚C 2 0.4 3.0 FORWARD VOLTAGE : VF (V) 3 2.4 RELATIVE LUMINOUS INTENSITY Yellow 10 IF=20mA MAXIMUM FORWARD CURRENT : IF Max. (mA) 20 5 1.6 Ta=25°C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 !Electrical characteristics5 (SML-020PDT) Orange Pure Green 10 5.0 2.0 1.0 0.5 0.2 0.1 1.5 2.0 2.5 FORWARD VOLTAGE : VF (V) Fig. 29 Forward current Fig. 3 vs. forward voltage 3.0 IF=20mA 1.4 Pure Green 1.2 Orange 1.0 0.8 0.6 RELATIVE LUMINOUS INTENSITY 20 5 1.6 Ta=25°C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 50 Ta=25˚C 2 1 0.5 0.2 Pure Green Orange 0.1 0.05 0.02 0.01 0.4 -20 0 20 40 60 80 CASE TEMPERATURE : Tc (˚C) Fig. 30 Luminous intensity vs. case temperature 0.5 1 2 5 10 20 50 100 FORWARD CURRENT : IF (mA) Fig. 31 Luminous intensity vs. forward current 5/6 SML-020 Series RELATIVE LUMINOUS INTENSITY 5 100Hz 200Hz 500Hz 1kHz 2kHz 5kHz 10kHz 20kHz 4 3 2.4 Orange, Pure Green 3.0 2 1 5 10 20 2 50 10 10 3 4 10 PULSE DURATION : Tw (µs) Fig. 32 Maximum tolerable peak current vs. pulse duration f=1kHz 2.5 DC 2.0 DF=50% 1.5 1.0 20% 15% 0.5 0 0 10% 5% 10 20 30 40 50 60 PEAK FORWARD CURRENT : IF peak (mA) Fig. 33 Luminous intensity vs. peak forward current MAXIMUM FORWARD CURRENT : IF Max. (mA) 6 50kHz RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT Light Emitting Diodes 30 Orange, Rure Green 20 10 0 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (˚C) Fig. 34 Maximum forward current vs. ambient temperature 6/6