SML-810MWT87P

Data Sheet SML-81 Series 3412 1305） （ 3.4×1.25mm t=1.1mm） （ Features ・ Reverse-mount type Color Type U D W M B Specifications Part No. ■ SML-811UT(A) ■ SML-811DT(A) ■ SML-811WT(A) ■ SML-812MT ■ SML-810MT ■ SML812BCT Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Typ. Min.*3 Typ. Max.*3 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) (V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Red AIGaInP on GaAs Orange Yellow Yellowish Green Blue 65 80 20 62 25 60　　 ＊1 100　　 ＊2 4 5 2.1 -30 to +85 -40 to +85 2.2 3.3 20 100　　 ＊2 5 -40 to +85 -40 to +100 1.95 10 100 4 5 5 615 602 587 569 567 464 620 605 590 572 570 470 625 608 593 575 573 476 20 10 11.2 22.4 28 40 16 56 20 10 14 5.6 22 GaP InGaN ＊1:Duty1/5, 200Hz / ＊2 Duty1/10,1kHz / ＊3 Reference ： ： Dimensions Recommended Solder Pattern Viewing Angle SML-811(A) / SML-812 / SML-810 Series X’ Y’ 40° 50° 60° 70° 80° 90° 100 30° 20° 10° 0° 10° 20° 30° X Y 40° 50° 60° 70° 80° 60° 70° 80° 90° 100 40° 50° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 RELATIVE INTENSITY (%) 0 50 90° 100 50 RELATIVE INTENSITY (%) 0 50 90° 100 4.2 Hole RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) SML812BCT X’ Y’ φ2.4 60° 40° 50° 30° 20° 10° 0° 10° 20° 30° X Y 40° 50° 60° 70° 80° 60° 70° 80° 90° 100 40° 50° 30° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 1.25 70° 80° 90° 100 50 0 50 Tolerance : ±0.1 （unit : mm） RELATIVE INTENSITY (%) 90° 100 50 RELATIVE INTENSITY (%) 0 50 90° 100 （unit : mm） RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 1/3 2011.05 - Rev.B SML-81 Series Electrical Characteristics Curves Forward Current-Forward Voltage 100 Ta=25°C ■ ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) FORWARD CURRENT：IF (mA) 100 Ta=25°C ■ ■ ■SML-812MT ■SML-810MT FORWARD CURRENT：IF (mA) 100 Ta=25°C ■ ■SML812BCT FORWARD CURRENT：IF (mA) 10 10 10 1 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGE：VF (V) 1 1.0 FORWARD VOLTAGE：VF (V) 1.5 2.0 2.5 3.0 1 2.0 FORWARD VOLTAGE：VF (V) 2.5 3.0 3.5 4.0 Luminous Intensity-Atmosphere Temperature 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=10mA ■ RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 -0 20 40 60 80 100 RELATIVE LUMINOUS INTENSITY (a.u.) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) 1.6 IF=20mA ■ ■ ■SML-812MT ■SML-810MT 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 -0 20 40 60 IF=20mA ■ ■SML812BCT -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) 80 100 Luminous Intensity-Forward Current 2.5 f=1kHz ■ RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) 1.5 f=1kHz ■ ■SML-812MT ■SML-810MT 1.2 1.0 0.8 0.6 0.4 0.2 0 0 Ta=25°C ■ ■SML812BCT 2.0 1.0 1.5 1.0 0.5 0.5 0 0 5 10 15 20 25 0 0 5 10 15 20 25 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) 5 10 15 20 Derating ■ MAXIMUM FORWARD CURRENT：IF (mA) 30 MAXIMUM FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT：IF (mA) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) ■ 30 ■SML-812MT ■SML-810MT ■ 30 ■SML812BCT 20 20 20 10 10 10 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERTURE：Ta (°C) AMBIENT TEMPERTURE：Ta (°C) 0 -40 AMBIENT TEMPERTURE：Ta (°C) -20 0 20 40 60 80 100 © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 2/3 2011.05 - Rev.B SML-81 Series Rank Reference of Brightness Red (U) Orange (D) Yellow (W) Luminous AG AH AJ AK AL AM AN AP Intensity Package size(mm) Height(mm) (mcd) 9.0 to 11.2 11.2 to 14 14 to 18 18 to 22.4 22.4 to 28 28 to 35.5 35.5 to 45 45 to 56 SML-811UT(A) Reverse Mount Chip 34125 1.1 SML-811DT(A) LEDs SML-811WT(A) AQ 56 to 71 （Ta=25˚C, IF＝20mA） AR AS AT AU AV AW AX 71 to 90 90 to 112 112 to 140 140 to 180 180 to 224 224 to 280 280 to 355 ＊Please note that the brightness of some products may fall between ranks (half rank). Green (M) Blue (B) Luminous G H J K L M N Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 SML-810MT※ Reverse Mount Chip 34125 1.1 LEDs P 25 to 40 （Ta=25˚C, IF＝20mA） Q R S T U V W X 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 SML-812MT※ SML812BCT ※Brightness on specification sheet include tolerance of within ±10%. Part No. Construction ∗ “−” will be taken out for emitting color B series. SML Series name 812 Package type M U D W M B T T86 W MilkyWhite P Rank sign (Brightness Rank)∗ Chip Type Emitting Color Resin Color Taping Specifications 0 1 2 Standard Type Low Current Type High Brightness Type Red:620nm Orange:605nm Yellow:590nm Yellowish-Green:570(572)nm Blue:470nm T86 Cathode at sprocket hole side T87 Reverse of T86 1 For white LED, cathode at sprocket hole side ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. © 2011 ROHM Co., Ltd. All rights reserved. www.rohm.com 3/3 2011.05 - Rev.B Notice Notes Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A