SML-A10MTT86

SML-A10 Series Light Emitting Diodes Side View type chip LED SML- A10 Series The SML-A10 series are saide view type chip LEDs. !External dimensions (Units : mm) !Features 1) Green colored light emisson. 2) Small shaped (1.6×1.15×0.55mm). 1.6 1.1 CATHODE INDEX 1.15 0.68 0.55 1.2 ELECTRODE (Unit : mm) (Note) Tolerance is within + − 0.1mm unless otherwise specified. !Selection guide Emitting color Green Lens Transparent clear SML-A10MT !Absolute maximum ratings (Ta=25°C) Parameter Symbol Limits Unit PD 55 mW Forward current IF 20 mA Peak forward current IFP 60 mA∗ Power dissipation VR 4 V Operating temperature Topr −30∼+85 °C Storage temperature Tstg −40∼+85 °C Reverse voltage ∗ Pulse width 1ms Duty 1 / 5 1/2 SML-A10 Series Light Emitting Diodes !Electrical and optical characteristics (Ta=25°C) Parameter Color VF(V) Type MT SML−A10 Reverse current Forward voltage Green Peak wavelength Luminous intensity Spectral line half width Cond. λP(nm) Cond. ∆λ(nm) Cond. Cond. IR(mA) Cond. Typ. Max. IF(mA) Max. VR(V) Min. IV(mcd) Typ IF(mA) Typ. IF(mA) Typ. IF(mA) 2.2 2.8 20 100 4 3.6 10 20 570 20 40 20 !Directional pattern X−Y X'−Y' SCANNING ANGLE (deg) 20 0 10 10 SCANNING ANGLE (deg) 20 30 40 40 30 40 50 80 80 90 100 50 60 60 70 70 0 20 50 60 60 50 10 40 50 50 90 100 0 10 20 30 30 70 70 80 80 90 100 50 RELATIVE INTENSITY (%) 0 90 100 50 RELATIVE INTENSITY (%) Fig.1 Directional pattem !Electrical characteristic curves 1.0 1.5 2.0 2.5 3.0 IF=20mA 0.8 0.4 −20 −10 Fig.2Forward current vs. forward voltage 0.01 10 100 Peak forward current : (mA) Fig.5 Relative luminous intensity vs. forward current MAXIMUM FORWARD CURRENT : (mA) Relative luminous intensity 0.10 1 10 20 30 40 50 60 70 80 Fig.3 Relative lluminous intensity vs. case temperature 1.00 0.1 0 CASE TEMPERATURE : Tc (˚C) (Ta=25 C) 200Hz 100Hz 500Hz 3 0.6 FORWARD VOLTAGE : VF (V) 10.00 2kHz 1kHz 1.0 20kHz 10kHz 5kHz 1.2 50kHz 1.4 IFP Max / IF Max 10.0 0.1 1.0 10 1.6 Ta=25˚C RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 100.0 1 1 10 100 1000 10000 PULSE DURATION : tW (µs) Fig.4 Patio of maximum tolerable peak current vs. pulse duration 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (°C) Fig.6 Maximum forward current vs. ambient temperature (Derating) 2/2