SML512BC5T

Data Sheet SML-51 Series 1608 0603） （ 1.6×0.8mm t=0.55mm） （ Features ・ riginal device technology enables high brightness O and high reliability ・ igh reliability due to the wide operation H temperature(-40℃ to +100℃) (SML-512(A) Series) Color Type V W U M C P D B Specifications Part No. Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min. Typ. Min.*3 Typ. Max.*3 PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) 35.5 75 Red ■ SML-512UW ■ SML-511UW ■ SML-512CW(A) ■ SML-512DW ■ SML-511DW ■ SML-512WW ■ SML-512VW(A) ■ SML-512VW 56 63 40 112 100 40 63 40 20 30 100* 2 626 5 -40 to +100 -40 to +100 10 5 619 630 624 620 603 606 605 590 570 560 470 636 22 629 625 606 609 608 593 22 575 563 5.6 476 5 14 14 16 5 20 14 71 36 14 36 62 75 62 75 Yellow 62 Yellowish Green Green InGaN on SiC Blue 66 25 30 25 30 60*1 100*2 60*1 100*2 60*1 4 5 4 5 4 -30 to +85 -40 to +100 -30 to +85 -40 to +100 -30 to +85 -40 to +85 2.0 -40 to +100 20 -40 to +85 -40 to +100 -40 to +85 100 10 100 10 4 5 615 600 603 AIGaInP on Orange GaAs 4 5 602 587 ■ SML-511WW ■ SML-512MW ■ SML-512PW(A) ■ SML512BC5T 4 567 2.1 100 5 -40 to +100 -40 to +100 2.9 5 464 557 25 65 20 100*2 5 ＊1:Duty1/5, 200Hz / ＊2:Duty1/10, 1kHz / ＊3:Reference Dimensions Recommended Solder Pattern Viewing Angle SML-51 Series 1.6 1.2 0.8 X Y SCANNING ANGLE (deg) Directivity (deg) 20° 30° 40° 50° 60° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 0 50 90° 100 60° 70° 80° 90° 100 50° 40° X’ Y’ SCANNING ANGLE (deg) Directivity (deg) 20° 30° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 0 50 90° 100 0.8 0.8 70° 80° 90° 100 0.55 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) 0.18 0.85 Cathode mark SML512BC5T SCANNING ANGLE (deg) Directivity (deg) X Y 0.8 SCANNING SCANNING ANGLE (deg) (deg) ANGLE X’ Y’ 20° 30° 40° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 20° 30° 40° 50° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 1.0 Terminal 60° 70° 50° 60° 70° 80° 90° 100 50 0 50 Tolerance : ±0.1 （unit : mm） 80° 90° 100 50 0 50 （unit : mm） 90° 100 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 1/2 2010.06 - Rev.A SML-51 Series Electrical Characteristics Curves Forward Current-Forward Voltage 100 Ta=25°C ■ 10 FORWARD CURRENT：IF (mA) FORWARD CURRENT : IF (mA) 1 ■SML-512VW(A) ■SML-512VW ■SML-512UW ■SML-511UW ■SML-512CW(A) ■SML-512DW ■SML-511DW ■SML-512WW ■SML-511WW ■SML-512MW ■SML-511PW(A) 100 Ta=25°C ■ ■SML512BC5T 10 0.1 1 1.5 2 2.5 3 1 2.8 2.9 3.0 3.1 3.2 FORWARD VOLTAGE : VF (V) FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA ■ RELATIVE LUMINOUS INTENSITY (a.u.) ■SML-511UW ■SML-511DW ■SML-511WW ■SML-512MW ■SML-511PW(A) ■SML-512VW(A) ■SML-512VW ■SML-512UW ■SML-512CW(A) ■SML-512DW ■SML-512WW 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=5mA ■ ■SML512BC5T -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current 1.5 Ta=25°C ■ RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) 1.0 0.5 ■SML-512VW(A) ■SML-512VW ■SML-512UW ■SML-512CW(A) ■SML-512DW ■SML-512WW ■SML-511UW ■SML-511DW ■SML-511WW ■SML-512MW ■SML-511PW(A) 4.0 Ta=25°C ■ ■SML512BC5T 3.0 2.0 1.0 0 0 5 10 15 20 25 30 0 0 5 10 15 20 PEAK FORWARD CURRENT：IF (mA) PEAK FORWARD CURRENT：IF (mA) Derating ■ MAXIMUM FORWARD CURRENT：IF (mA) 40 30 MAXIMUM FORWARD CURRENT：IF (mA) 20 ■SML-511UW ■SML-511DW ■SML-511WW ■SML-512VW(A) ■SML-512VW ■SML-512UW ■SML-512CW(A) ■SML-512DW ■SML-512WW ■SML-512MW ■SML-511PW(A) ■ 30 ■SML512BC5T 20 10 10 10 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. 2/2 2010.06 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A