SMLR13WBDW3

SML-R12Y8T Data Sheet SML-R1 Series PICOLEDTM-side 16115（0604） 1.6×1.15mm（t=0.2mm） Features Color Type ・Ultra compact, thin side-view type LED ・Ultra low height package t=0.2mm V U D Y M P B WB Specifications Part No. Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min.*2 Typ. Max.*2 Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) ■ SML-R12V8T Red ■ SML-R12U8T ■ SML-R12D8T AIGaInP on GaAs ■ SML-R12Y8T Orange Yellow ■ SML-R12M8T Yellowish Green ■ SML-R12P8T Green ■ SMLR13BDT InGaN ■ SMLR13WBDW 54 2.2 20 Blue 66 White 78 100＊1 5 -40 to +85 20 -40 to +100 10 3.0 5 5 625 630 635 16 40 615 620 625 25 63 40 100 25 63 602 605 608 587 590 593 20 569 572 575 10 25 557 560 563 2.5 6.3 465 470 475 5 (x, y) (0.30, 0.30) 14 36 56 110 20 5 ＊1:Duty1/10, 1kHz /＊2:Reference Dimensions Recommended Solder Pattern Viewing Angle Directivity (deg) 20° 30° 10° 0° 10° 20° 40° 40° 70° 70° 80° 80° 1.15 0.68 90° 100 50 0 90° 100 50 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) 3.3 30° 20° 10° 0° 10° 20° （unit : mm） 50 RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE 80° 0 SCANNING ANGLE (deg) 20° 10° 0° 10° 20° 30° 40° 50 RELATIVE INTENSITY (%) 50° 60° 60° 70° 90° 100 90° 100 50 50° 60° RELATIVE INTENSITY (%) 0 Directivity (deg) 50° 50 40° 70° 40° 80° Tolerance : ±0.1 （unit : mm） 30° 80° 90° 100 40° 70° 90° 100 20° 60° 30° 60° 1.1 10° 80° X’ - Y’ 50° 0° 50° 30° 40° 10° 70° SMLR13BDT / SMLR13WBDW SCANNING ANGLE (deg) Directivity (deg) X-Y 20° 60° 60° 60° 30° 50° 50° 50° Cathode mark Directivity (deg) X’ - Y’ 30° 40° 0.9 SCANNING ANGLE (deg) SCANNING ANGLE (deg) X-Y 0.2+0.05 -0.02 1.2 SML-R12□8T Series 1.2 1.6 70° 70° 80° 80° 90° 100 50 0 50 90° 100 RELATIVE INTENSITY (%) RELATIVE INTENSITY (%) ＊PICOLEDTM is ROHM's pending trademark. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 1/3 2011.05 - Rev.B SML-R1 Series Electrical Characteristics Curves   Forward Current-Forward Voltage FORWARD CURRENT：IF (mA) ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 10 1 1.0 1.5 2.0 ■ ■ SMLR13BDT ■ SMLR13WBDW ■ ■ SMLR13BDT ■ SMLR13WBDW ■ ■ SMLR13BDT ■ SMLR13WBDW ■ ■ SMLR13BDT ■ SMLR13WBDW 10 1 2.0 3.0 2.5 Ta=25°C 100 FORWARD CURRENT：IF (mA) Ta=25°C 100 FORWARD VOLTAGE：VF (V) 2.5 3.0 3.5 4.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature RELATIVE LUMINOUS INTENSITY (a.u.) ■ 1.4 1.2 ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 IF=5mA 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) IF=20mA 1.6 100 1.4 1.2 1.0 0.8 0.6 0.4 -40 ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current RELATIVE LUMINOUS INTENSITY (a.u.) 1.0 0.8 ■ ■ ■ ■ ■ ■ ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T 0.6 0.4 0.2 0 0 5 10 15 Ta=25°C 4.0 RELATIVE LUMINOUS INTENSITY (a.u.) Ta=25°C 1.2 20 3.0 2.0 1.0 0 0 PEAK FORWARD CURRENT：IF (mA) 5 10 15 20 FORWARD CURRENT：IF (mA) MAXIMUM FORWARD CURRENT： (mA) ■ 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. ■SML-R12V8T ■SML-R12U8T ■SML-R12D8T ■SML-R12Y8T ■SML-R12M8T ■SML-R12P8T MAXIMUM FORWARD CURRENT：IF (mA) Derating 30 25 20 15 10 5 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) 2/3 2011.05 - Rev.B SML-R1 Series Rank Reference of Brightness Red (V, U) Package size(mm) Luminous Intensity (mcd) Height(mm) Side View 16115 Chip LEDs G H J K 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 L M N P 6.3 to 10 10 to 16 16 to 25 Q R 25 to 40 40 to 63 63 to 100 SML-R12V8T SML-R12U8T 0.2 （Ta=25˚C, IF＝20mA） W X S T U V 100 to 160 160 to 250 250 to 400 400 to 630 Orange (D) Package size(mm) Luminous Intensity (mcd) Height(mm) Side View 16115 Chip LEDs H J K L M N P Q R S T U V 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 Side View 16115 Chip LEDs G H J K 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 M N P Q R S T U V 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 Side View Chip LEDs 16115 F G H J K 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 0.2 L M N 6.3 to 10 10 to 16 P Luminous Intensity (mcd) Height(mm) Side View Chip LEDs 16115 16 to 25 25 to 40 SML-R12M8T R S T U V 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 1810 （Ta=25˚C, IF＝5mA） V W G H J K L M N P Q R S T U 0.9 to 1.4 1.4 to 2.2 2.2 to 3.6 3.6 to 5.6 5.6 to 9.0 9 to 14 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 SMLR13BDT White (WB) Side View Chip LEDs 630 to 1000 SML-R12P8T 0.2 Luminous Package Intensity size (mcd) (mm) Height(mm) P 25 to 36 Q 36 to 56 R 56 to 90 S 90 to 140 T 140 to 220 U 220 to 360 （Ta=25˚C, IF＝5mA） V W 360 to 560 560 to 900 SMLR13WBDW 0.2 Part No. Construction ∗ “−” will be taken out for emitting color W/B/E series. S M L Special Code will be applied for Emitting color W/B/E series. R 1 2 M Series name Package name Chip Type T Emitting Color Chromaticity rank(for white LED) T 8 6 Resin Color 2 High Brightness Type V Red:630nm T Ultra High Brightness Type U Red:620nm W MilkyWhite Transparent Colorless P Rank sign (Brightness Rank)∗ Taping Specifications 3 D Orange:605nm T86 Cathode at sprocket hole side T87 Reverse of T86 1 For white LED, cathode at sprocket hole side Y Yellow:587(590)nm M Yellowish-Green:572nm P Green:560nm B Blue:470nm WB White ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com 1000 to 1600 （Ta=25˚C, IF＝20mA） W X Q Blue (B) Package size(mm) 630 to 1000 SML-R12Y8T 0.2 Luminous Intensity (mcd) Height(mm) 1000 to 1600 （Ta=25˚C, IF＝20mA） W X L Green (M, P) Package size(mm) 630 to 1000 SML-R12D8T 0.2 Luminous Intensity (mcd) Height(mm) 1000 to 1600 （Ta=25˚C, IF＝20mA） W X G Yellow (Y) Package size(mm) 630 to 1000 © 2011 ROHM Co., Ltd. All rights reserved. 3/3 2011.05 - Rev.B 1000 to 1800 Notice Notes Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A