UDZUVFHTE-175.6B

PP4FL3.3A ~ P4FL64A Series SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Voltage 3.3~64 V Power SOD-123FL 400 W Features  Ultra thin profile package for space constrained utilization.  High temperature soldering: 260 C/10 seconds at o terminals  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard Mechanical Data  Case: Molded plastic, SOD-123FL  Terminals: Solder plated, solderable per MIL-STD-750, Method 2026  Polarity: Color Band denotes cathode end  Approx. Weight: 0.0006 ounces, 0.0173 grams o Maximum Ratings and Thermal Characteristics (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Peak Pulse Power Dissipation(tp = 10/1000 us) Peak Pulse Current on tp = 10/1000 us waveform ESD IEC61000-4-2(Air) ESD IEC61000-4-2(Contact) Typical Thermal Resistance Junction to Ambient Operating Junction Temperature Range Storage Temperature Range July 26,2018-REV.04 PPP (Fig.2) LIMIT UNITS (1,2) 400 W (1) See table 1 A IPPM VESD RθJA (3) ±30 kV ±30 200 o C/W TJ -55~150 o TSTG -65~150 o C C Page 1 PP4FL3.3A ~ P4FL64A Series o Electrical Characteristics (TA = 25 C unless otherwise noted) Part Number VRWM V VBR IR@VRWM Marking VC@IPP Min. Max. IT V V mA uA V A Code 400W Transient Voltage Suppressor P4FL3.3A 3.3 5.2 6 10 100 8.5 47 4F1 P4FL5.0A 5 6.4 7 10 50 9.2 43.5 4F2 P4FL6.0A 6 6.67 7.37 10 50 10.3 38.8 4F3 P4FL6.5A 6.5 7.22 7.98 10 40 11.2 35.7 4F4 P4FL7.0A 7 7.78 8.6 10 40 12 33.3 4F5 P4FL7.5A 7.5 8.33 9.21 1 30 12.9 31 4F6 P4FL8.0A 8 8.89 9.83 1 5 13.6 29.4 4F7 P4FL8.5A 8.5 9.44 10.4 1 5 14.4 27.8 4F8 P4FL9.0A 9 10 11.1 1 0.5 15.4 26 4F9 P4FL10A 10 11.1 12.3 1 0.5 17 23.5 4FA P4FL11A 11 12.2 13.5 1 0.5 18.2 22 4FB P4FL12A 12 13.3 14.7 1 0.5 19.9 20.1 4FC P4FL13A 13 14.4 15.9 1 0.1 21.5 18.6 4FD P4FL14A 14 15.6 17.2 1 0.1 23.2 17.2 4FE P4FL15A 15 16.7 18.5 1 0.1 24.4 16.4 4FF P4FL16A 16 17.8 19.7 1 0.1 26 15.4 4FH P4FL17A 17 18.9 20.9 1 0.1 27.6 14.5 4FJ P4FL18A 18 20 22.1 1 0.1 29.2 13.7 4FK P4FL20A 20 22.2 24.5 1 0.1 32.4 12.3 4FL P4FL22A 22 24.4 26.9 1 0.1 35.5 11.3 4FM P4FL24A 24 26.7 29.5 1 0.1 38.9 10.3 4FN P4FL26A 26 28.9 31.9 1 0.1 42.1 9.5 4FP P4FL28A 28 31.1 34.4 1 0.1 45.4 8.8 4FR P4FL30A 30 33.3 36.8 1 0.1 48.4 8.3 4FT P4FL33A 33 36.7 40.6 1 0.1 53.3 7.5 4FU P4FL36A 36 40 44.2 1 0.1 58.1 6.9 4FV P4FL40A 40 44.4 49.1 1 0.1 64.5 6.2 4FW P4FL43A 43 47.8 52.8 1 0.1 69.4 5.8 4FX P4FL45A 45 50 55.3 1 0.1 72.2 5.5 4FY P4FL48A 48 53.3 58.9 1 0.1 77.4 5.2 4FZ P4FL51A 51 56.7 62.7 1 0.1 82.4 4.9 4H1 July 26,2018-REV.04 Page 2 PP4FL3.3A ~ P4FL64A Series o Electrical Characteristics (TA = 25 C unless otherwise noted) Part Number VRWM V VBR IR@VRWM Marking VC@IPP Min. Max. IT V V mA uA V A Code 400W Transient Voltage Suppressor P4FL54A 54 60 66.3 1 0.1 87.1 4.6 4H2 P4FL58A 58 64.4 71.2 1 0.1 93.6 4.3 4H3 P4FL60A 60 66.7 73.7 1 0.1 96.8 4.1 4H4 P4FL64A 64 71.1 78.6 1 0.1 103 3.9 4H5 NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig.2 2. Mounted on 5mm2 copper pads to each terminal 3. Mounted on a FR4 PCB, single-sided copper, mini pad 4. TVS is a transient protection device, it is strongly recommended not to use as a Zener July 26,2018-REV.04 Page 3 PP4FL3.3A ~ P4FL64A Series TYPICAL CHARACTERISTIC CURVES 110 100 90 80 70 60 50 40 30 20 10 0 PPP or IPP Derating Percentage (%) PPPM - Peak Pulse Power(kW) 100 Non-Repetive Pluse Waverform Shown in Figure 3 TA=25oC 10 1 0.1 0.01 1 10 100 1,000 10,000 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature(oC) td - Pulse Width(us) Fig.1 Pulse Power Rating Curve Fig.2 Derating Curve Percent of IPP(%) CJ - Junction Capacitance(pF) 10,000 110 100 90 80 70 60 50 40 30 20 10 0 50% of IPP@1000us Rise time 10~90 %-10 us 0 1 2 Time(ms) Fig.3 Pulse Waveform July 26,2018-REV.04 3 4 1,000 VR = 0 V 100 10 1 1 10 100 VRWM - Reverse Stand-off Voltage(V) Fig.4 Typical Capacitance Page 4 PP4FL3.3A ~ P4FL64A Series Part No Packing Code Version Part No Packing Code Package Type Packing Type Marking Version P4FLxxxA_R1_00001 SOD-123FL 3K pcs / 7” reel See Table Halogen free Packaging Information & Mounting Pad Layout Unit: inch(mm) SOD-123FL Pad Layout Unit: inch(mm) 0.167 (4.25) 0.044(1.10) 0.035(0.90) 0.122 (3.10) 0.048 (1.22) 0.115(2.90) 0.106(2.70) 0.044(1.10) 0.031(0.80) 0.075(1.90) 0.067(1.70) SOD-123FL Dimension 0.145(3.70) 0.137(3.50) 0.008(0.20) 0.004(0.10) 0.045 (1.15) 0.030(0.75) 0.017(0.45) July 26,2018-REV.04 Page 5 PP4FL3.3A ~ P4FL64A Series Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. July 26,2018-REV.04 Page 6