UMA6NTR

EMA6 / UMA6N Transistors Emitter common (dual digital transistors) EMA6 / UMA6N zExternal dimensions (Unit : mm) zFeature 1) Two DTA144T chips in a EMT or UMT package. zEquivalent circuit (2) (2) 0.13 1.2 1.6 (1) 0.5 (3) R1 (3) (4) (5) EMA6 / UMA6N 0.5 0.5 1.0 1.6 0.22 EMA6 (1) R1 ROHM : EMT5 EMA6 UMA6N 1.25 EMT5 UMT5 2.1 Marking A6 A6 TR 3000 0.1Min. 0.7 T2R 8000 1.3 2.0 0 to 0.1 Code Basic ordering unit (pieces) 0.15 Type Package 0.9 (1) (5) zPackage, marking, and packaging specifications (2) 0.2 (4) UMA6N 0.65 0.65 (5) (3) (4) Each lead has same dimensions ROHM : UMT5 EIAJ : SC-88A Each lead has same dimensions zAbsolute maximum ratings (Ta=25°C) Symbol Limits Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −5 V Collector current IC −100 mA Collector power dissipation Pc 150(TOTAL) mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Parameter ∗1 ∗1 120mW per element must not be exceeded. zElectrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Collector-base breakdown voltage Parameter BVCBO −50 − − V IC= −50µA Collector-emitter breakdown voltage BVCEO −50 − − V IC= −1mA Emitter-base breakdown voltage Collector cutoff current BVEBO ICBO −5 − − − − −0.5 V µA IE= −50µA VCB= −50V Emitter cutoff current Collector-emitter saturation voltage IEBO − − −0.5 µA VEB= −4V VCE(sat) − − −0.3 V IC/IB= −5mA/ −0.5mA VCE/IC= −5V/ −1mA hFE 100 250 600 − Transition frequency fT − 250 − MHz Input resistance R1 32.9 47 61.1 kΩ DC current transfer ratio Conditions VEB= −10V, IE=5mA, f=100MHz ∗ − ∗Transition frequency of the device. Rev.A 1/2 EMA6 / UMA6N Transistors 1k VCE=−5V DC CURRENT GAIN : hFE 500 200 100 50 Ta=100°C 25°C −40°C 20 10 5 2 1 −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m−100m COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) zElectrical characteristics curves −1 lC/lB=10 −500m −200m −100m Ta=100°C 25°C −40°C −50m −20m −10m −5m −2m −1m −10µ −20µ −50µ −100µ −200µ −500µ −1m −2m −5m −10m COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.1 DC current gain vs.collector current Fig.2 Collector-emitter saturation voltage vs.collector current Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1