US5L10

US5L10 Transistors General purpose transistor (isolated transistor and diode) US5L10 A 2SD2674 and a RB461F are housed independently in a TUMT5 package. Applications DC / DC converter Motor driver Dimensions (Unit : mm) 2.0 Features 1) Tr : Low VCE(sat) Di : Low VF 2) Small package ROHM:TUMT5 Abbreviated symbol:L10 Structure Silicon epitaxial planar transistor Schottky barrier diode Equivalent circuit (5) (4) Di2 Tr1 (1) (2) (3) Packaging specification s Type Package Marking Code Basic ordering unit(pieces) US5L10 TUMT5 L10 TR 3000 Rev.B 0.2Max. 1.3 1/4 US5L10 Transistors Absolute maximum ratings (Ta=25°C) Tr1 Limits Symbol 15 VCBO VCEO 12 VEBO 6 IC 1.5 Collector current ICP 3 Power dissipation 0.9 Pc Junction temperature Tj 150 Range of storage temperature Tstg −40 to +125 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage ∗1 Single pulse, Pw=1ms. ∗2 Mounted on a 25mm×25mm× t 0.8mm ceramic substrate Unit V V V A ∗1 A W/ELEMENT ∗2 °C °C Di2 Parameter Symbol Average rectified forward current IF Forward current surge peak (60HZ, 1∞) IFSM Reverse voltage (DC) VR Junction temperature Tj Range of storage temperature Tstg Peak reverse voltage VRM Power dissipation PD ∗ Mounted on a 25mm×25mm× t 0.8mm ceramic substrate Limits 700 3 20 125 −40 to +125 25 0.5 Unit mA A V °C °C V W/ELEMENT ∗ Tr1& Di2 Parameter Total power dissipation Symbol PD Limits 0.4 1.0 Unit W/TOTAL W/TOTAL ∗1 ∗2 ∗1 Each terminal mounted on a recommended land ∗2 Mounted on a 25mm×25mm× t 0.8mm ceramic substrate Electrical characteristics (Ta=25°C) Tr1 Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance ∗ Pulsed Symbol Min. BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob 15 12 6 − − − 270 − − Typ. Max. Unit − − − − − 85 − 400 12 − − − 100 100 200 680 − − V V V nA nA mV − pF IC=10µA IC=1mA IE=10µA VCB=15V VEB=6V Conditions IC/IB=500mA/25mA VCE/IC=2V/200mA VCB=10V, IE=0A, f=1MHz ∗ MHz VCE=2V, IE=−200mA, f=100MHz ∗ Di2 Parameter Forward voltage Reverse current Reverse recovery time Symbol VF IR trr Min. − − − Typ. 450 − 9 Max. 490 200 − Unit mV µA ns IF=700mA VR=20V IF=IR=100mA, Irr=0.1IR Conditions Rev.B 2/4 US5L10 Transistors Electrical characteristic curves Tr1 BASE SATURATION VOLTAGE : VBE (sat) (V) COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1000 Ta=100°C 10 Ta=−40°C Ta=25°C Ta=100°C 20/1 IC/IB=20 Pulsed VBE(sat) 1 Ta=25°C VCE=2V DC CURRENT GAIN : hFE 1 Ta=25°C Ta=−40°C 0.1 100 0.1 Ta=100°C Ta=25°C Ta=−40°C IC/IB=50/1 VCE(sat) 0.01 0.01 IC/IB=20/1 IC/IB=10/1 10 0.001 VCE=2V Pulsed 0.01 0.1 1 10 0.001 0.001 0.01 0.1 1 10 0.001 0.001 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) Fig.1 DC current gain vs. collector current Fig.2 Collector-emitter saturation voltage base-emitter saturation voltage vs. collector current Fig.3 Collector-emitter saturation voltage vs. collector current 10 COLLECTOR CURRENT : IC (A) 1 TRANSITION FREQUENCY : fT (MHz) VCE=2V Pulsed 1000 1000 Ta=25°C VCE=2V f=100MHz tstg SWITCHING TIME : (ns) 100 Ta=100°C 0.1 Ta=25°C 100 0.01 Ta=−40°C 10 tdon tf tr 0.001 0 0.5 1.0 1.5 10 −0.001 VCE=2V Ta=25°C Pulsed −0.01 −0.1 −1 −10 1 0.01 0.1 1 10 BASE TO EMITTER VOLTAGE : VBE (V) EMITTER CURRENT : IE (A) COLLECTOR CURRENT : IC (A) Fig.4 Grounded emitter propagation characteristics Fig.5 Gain bandwidth product vs. emitter current Fig.6 Switching time EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) 100 Cib IE=0A f=1MHz Ta=25°C Cob 10 1 0.1 1 10 100 EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage Rev.B 3/4 US5L10 Transistors Di2 10 1000m 100m 1 °C FORWARD CURRENT : IF (A) REVERSE CURRENT : IR (A) Ta=125°C 10m 1m 100µ 10µ 1µ 0.1µ Ta=−25°C 100m =1 Ta 25 1m 0.1m 0 0.1 0.2 0.3 0.4 0.5 0.6 FORWARD VOLTAGE : VF (V) Ta =2 5 10m Ta =− 25 °C °C Ta=25°C 0 10 20 30 40 50 60 70 REVERSE VOLTAGE : VR (V) Fig.9 Forward characteristics Fig.10 Reverse characteristics Rev.B 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1