5W4HCA-H30

5W4HCA-H30 Features high intensity LED lamp 5 mm round epoxy package UV resistant epoxy for outdoor use Super Bright White LED Package Dimensions 5.40 [0.21] Applications indicators illumination Õ ¦ 5.80 [0.23] Õ ¦ 5.00 [0.2] 8.60 [0.34] Absolute Maximum Ratings ( Ta = 25 °C ) Parameter Power Dissipation Peak Forward Current *) Continuous Forward Current 0.50 [0.02] Symbol PD IFP IF Max 100 80 30 Unit 0.60 [0.02] mW mA mA 1.00 [0.04] MAX 1.00 [0.04] 0.50 [0.02] 25.4 [1.00] MIN Reverse Voltage Operating Temperature Range Storage Temperature Range Lead Soldering Temperature **) VR Topr 5 -30 to +80 °C V 2.54 [0.10] 1.00 [0.04] MIN CATHODE Tstg Tstg -40 °C to +100 °C Unit: mm[inches] Tolerance: ¡ 0.25mm0.01 ] À Tsol 260 °C *) Duty cycle max. 1/10, Pulse Width max. 0.1 ms **) At the position of 4 mm from the bottom of the package within 5 seconds Electrical Optical Characteristics ( Ta = 25 °C @ If = 20 mA ) Forward Part No. Material Lens Emitting Color Typ 5W4HCA-H30 InGaN Water Clear White 3.2 Max 3.6 Min 25000 Max 30000 0.32/0.30 Voltage (V) Luminous Intensity (mcd) Chromaticity Coordinate (x/y) Viewing Angle (2θ1/2) 20 Caution in ESD 1.Static electricity and surge damages the LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices and equipment and machinery must be properly grounded. 2.When inspecting own final products on which LEDs were mounted, It is easy to find static-damaged LEDs by light emission test at lower current (below 1 mA is recommended) . 3.Damaged LEDs will show some unusual characteristics such as leak current remarkably increases, starting forward voltage becomes lower, or the LEDs get unlighted at the low current.