MS-216-L-4

MS-216-L Cylindrical Magnet Sensor Standard Size, 6.0 mm Diameter x 40.0 mm, 30 W, Line Voltage Available with optional LED for closure indication All dimensions in mm Does not require power for operation Omni-polar device; actuates with either pole of magnet Normally open (NO) contact, others available on request Three magnetic sensitivity bands Contact rating of up to 60W Lead (Pb) free and RoHS compliant Applications This magnet sensor is suitable for use in the following applications and many others: door sensing in domestic goods, automobile ABS, fork lifts, adjustable chairs and beds... Specification Contact Form Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Breakdown Voltage (min) Initial Contact Resistance (max) Operating Temperature Shock Resistance (½Sin wave for 11ms) Vibration Resistance (10-2000Hz) Ordering Code MS-216-L-(Operate AT Code)-(Cable length in mm)-(Lead Code) OAT Code Lead Code 3 20 – 25 S 4 25 – 30 T 5 30 - 35 M W / VA A A VDC / AC VDC m °C g g A 30 0.5 2.5 230 350 200 -40 to +70 150 20 Stripped to 5mm Stripped to 5mm and Tinned Molex Connector Example MS-216-L-3-500-M denotes 20-25 Operate AT, with 500 mm cable length and Molex connectors. Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 15 March 2008 s Reed Relays and Electronics India Limited  info@reed-switch.com  Tel 91-44-6528-4022 MS-216-L Cylindrical Magnet Sensor Actuation Distances Operate and release distances for the MS-216-L large cylindrical sensor, in two AT bands when actuated (as shown in the sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide. MS-216-L-3 (20-25 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance N/A N/A N/A N/A N/A 4.0 – 5.0 7.5 – 9.5 21.0 – 23.0 Operate Distance N/A N/A 2.0 – 5.0 4.5 – 7.0 5.5 – 9.0 9.0 – 13.0 16.0 – 20.0 26.0 – 31.5 Release Distance N/A N/A N/A N/A N/A 12.0 – 15.0 16.0 – 20.0 34.0 – 38.0 Release Distance N/A N/A 7.0 – 10.0 9.5 – 12.5 11.0 – 15.0 16.0 – 21.0 25.0 – 30.0 38.0 – 45.0 Actuation Sketch MS-216-L-4 (25-30 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance N/A N/A N/A N/A N/A N/A 2.5 – 7.5 15.0 – 21.0 Operate Distance N/A N/A 1.5 – 2.0 3.0 – 4.5 5.0 – 6.0 8.0 – 9.0 15.0 – 16.0 23.5 – 26.0 Release Distance N/A N/A N/A N/A N/A N/A 16.0 – 18.0 34.0 – 35.0 Release Distance N/A N/A 6.0 – 7.0 9.0 – 10.0 11.0 – 12.5 16.0 – 18.0 25.0 – 27.0 38.0 – 40.0 Actuation Sketch Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 20 January 2009 s Reed Relays and Electronics India Limited  info@reed-switch.com  Tel 91-44-6528-4022