MS-328-5

MS-328 Flat pack Magnet Sensor Standard Size, 8.0 mm mounting slot, 30 W, Line Voltage All dimensions in mm Does not require power for operation Omni-polar device; actuates with either pole of magnet Normally open (NO) contact, others available on request Three magnetic sensitivity bands Contact rating of up to 60W Lead (Pb) free and RoHS compliant Applications This magnet sensor is suitable for use in the following applications and many others: satellite television dish positioning, door sensing in domestic goods, heavy vehicles, door and window security, fork-lifts, adjustable chairs and beds... Specification Contact Form Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Breakdown Voltage (min) Initial Contact Resistance (max) Operating Temperature Shock Resistance (½Sin wave for 11ms) Vibration Resistance (10-2000Hz) Ordering Code MS-328-(Operate AT Code)-(Cable length in mm)-(Lead Code) OAT Code Lead Code 3 20 – 25 S 4 25 – 30 T 5 30 - 35 M W / VA A A VDC / AC VDC m °C g g A 30.0 0.5 2.5 230 350 200 -40 to +70 50 20 Stripped to 5mm Stripped to 5mm and Tinned Molex Connector Example MS-328-3-500-M denotes 20-25 Operate AT, with 500 mm cable length and Molex connectors. Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 25 December 2007 s Reed Relays and Electronics India Limited  info@reed-switch.com  Tel 91-44-6528-4022 MS-328 Flat pack Magnet Sensor Actuation Distances Operate and release distances for the MS-328 miniature Flat pack sensor in three AT bands when actuated (as shown in the sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Although some of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an application is important and can be done by going through our AT band FAQ and our magnet selection guide. MS-328-3 (20-25 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance N/A N/A 4.0 – 5.0 5.0 – 6.5 7.0 – 8.5 9.5 – 12.0 15.0 – 18.0 23.0 – 27.0 Release Distance N/A N/A 7.0 – 8.0 9.5 – 10.0 12.0 – 13.0 16.0 – 18.0 23.0 – 24.0 34.0 – 36.0 MS-328-4 (25-30 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance N/A N/A 3.0 – 4.0 4.5 – 5.0 6.5 – 7.0 9.0 – 10.0 14.0 – 15.0 22.0 – 23.0 Release Distance N/A N/A 7.0 – 8.0 9.0 – 9.5 11.0 – 12.0 15.0 – 16.0 22.0 – 23.0 33.0 – 34.0 MS-328-5 (30-35 AT) Actuation Sketch Magnet NDR-T NDC-T NDR-S NDC-S NDR-M NDC-M NDR-L NDC-L Dimensions 4.0 x 1.5 x 1.5 Ø2.0 x 4.0 6.0 x 2.5 x 2.5 Ø3.0 x 7.0 8.0 x 3.0 x 3.0 Ø4.0 x 10.0 19.0 x 4.0 x 4.0 Ø8.0 x 15.0 Operate Distance N/A N/A 2.5 – 3.0 4.0 – 5.0 5.5 – 6.5 8.0 – 9.5 12.0 – 14.0 20.0 – 22.0 Release Distance N/A N/A 7.0 – 7.5 9.0 – 9.5 11.0 – 12.0 15.0 – 16.0 21.0 – 23.0 31.0 – 33.0 Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 20 January 2009 s Reed Relays and Electronics India Limited  info@reed-switch.com  Tel 91-44-6528-4022