B0305T-1W

ELECTRONIC COMPONENTS RSG ■ RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de ■ ■ ■ ■ ■ Änderungen vorbehalten / subject to change without notice B_(X)T-1W Series 1W,FIXED INPUT, ISOLATED & UNREGULATED single OUTPUT, SMD DC-DC CONVERTER multi-country patent protection RoHS PRODUCT PROGRAM FEATURES Single Voltage Output SMD Package Style Industry Standard Pinout No Heatsink Required 1KVDC Isolation High Power Density Temperature Range: -40°C~+85°C No External Component Required RoHS Compliance Part Number B0303(X)T-1W B0305(X)T-1W B0503(X)T-1W B0505(X)T-1W B0509(X)T-1W B0512(X)T-1W B0515(X)T-1W 5 4.5-5.5 Nominal 3.3 Input Voltage (VDC) Range 3.0-3.6 Voltage (VDC) 3.3 5 3.3 5 9 12 15 5 12 10.8-13.2 9 12 15 3.3 5 24 21.6-26.4 9 12 15 Output Current (mA) Max 303 200 303 200 111 84 67 200 111 84 67 300 200 110 83 67 Min 30 20 30 20 12 9 7 20 12 9 7 30 20 11 8 7 4 73 74 72 77 76 79 78 69 73 73 74 69 70 72 75 76 77 Efficiency (%, Typ.) UL CE UL， CE UL， CE UL， CE UL， CE UL， CE UL， CE UL， CE UL， CE APPLICATIONS The B_(X)T-1W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) Where isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. B1205(X)T-1W B1209(X)T-1W B1212(X)T-1W B1215(X)T-1W B2403(X)T-1W B2405(X)T-1W B2409(X)T-1W B2412(X)T-1W B2415(X)T-1W B2424(X)T-1W 24 42 Note :1.the B_XT-1W series have no 3,6,7 pin. For example B0505XT-1W. 2. B_XT-1W :UL-60950-1 pending. MODEL SELECTION B0505(X )T-1W Ra ted Po wer P acka ge Styl e Ou tpu t Vol tag e In pu t Vol tag e P ro du ct Se ri es OUTPUT SPECIFICATIONS Item Output power Line regulation For Vin change of 1%(3.3V t t) For Vin change of 1%(Others) 10% to 100% load (3.3V output) 10% to 100% load (5V output) Load regulation 10% to 100% load (9V output) 10% to 100% load (12V output) 10% to 100% load (15V output) Output voltage accuracy Temperature drift Output ripple &Noise* Switching frequency 100% full load 20MHz Bandwidth Full load, nominal input(5/12V) Full load, nominal input(24V) 50 100 500 15 12.8 8.3 6.8 6.3 Test Conditions Min Typ. Max 1 ±1.5 ±1.2 20 15 15 15 15 0.03 75 %/°C mVp-p KHz % Units W % See tolerance envelope graph *test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1.All specifications measured at TA=25°C, humidity220 oC ) EXTERNAL CAPACITOR TABLE (Table 1) Vin Cin Vout Cout (VDC) (uF) (VDC) (uF) 3.3 3.3 4.7 10 /5 5 4.7 10 12 2.2 9 4.7 24 0.47 12 2.2 15 1 24 0.47 It’s not recommend to connect any external capacitor in the application field with less than 0.5 watt output. Time ( s ec .) OUTLINE DIMENSIONS & FOOTPRINT DETAILS 4.13 (0.163) Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure2). Vin REG +Vout 6.25 (0.246) 6.00 (0.236) (Side view) 2.54 0.25 (0.100) (0.100) First Angle Projection DC DC GND 0V REG REC OM MENDED FO OTPRIN T Top view,grid:2.54mm(0.1inch) 6.76 (0.266) A 1.85MAX (0.073) 7.19 (0.283) 0.3 (0.012) Vin GND +Vout 12.70 (0.500) 7.62 (0.300) 11.2 MAX (0.441) 7.50 (0.295) DC DC 0V (Top view) B_T-1W 0.60±0.05 (0.024±0.002) B_(X)T-1W 8 12 5 4 （Figure2） Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. No parallel connection or plug and play. 2.54±0.1 (0.100±0.004) 8765 1234 0.50 (0.020) F OO TPRINT DETAILS 1.35MAX (0.053) 5.00 。 N ote: U nit:mm (inch) P in section:0.60*0.25mm(0.024*0.010inch) P in tolerances: +0.10mm( +0.004inch) G eneral tolerances: +0.15mm ( +0.006inch) S ingle Pin 1 GND 2 Vin 0V 4 +V0 5 NC 3,6,7 NC 8 NC:No Connection D uals GND Vin 0V +Vo NO Pin NC Specifications subject to change without notice. B_(X)T-1W A/0-2007 Page 2 of 2