CX6S0.T.SM4

CX6SM AT CRYSTAL 9.6 MHz to 250 MHz ™ Ultra-Low Profile Miniature Surface Mount AT Quartz Crystal Fundamental Mode: 9.6 MHz - 250 MHz 48 MHz - 160 MHz DESCRIPTION Third Overtone Mode: STATEK’s miniature CX6SM AT crystals in leadless ceramic packages are designed for surface mounting on printed circuit boards or hybrid substrates. These crystals have a small land pattern and a low profile. They are manufactured using the STATEK-developed photolithographic process, and were designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. FEATURES actual size side view glass lid X XXX S ceramic lid D PACKAGE DIMENSIONS Ultra low profile (less than 1 mm available) hermetically sealed ceramic package Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques. Excellent aging characteristics Available with glass or ceramic lid High shock and vibration resistance Custom designs available Full military testing available Designed and manufactured in the USA APPLICATIONS B C D A TOP BOTTOM TYPICAL DIM A B C D inches 0.265 0.103 0.050 mm 6.73 2.62 1.27 MAXIMUM inches 0.280 0.114 0.060 mm 7.11 2.90 1.52 Medical Monitoring Equipment Industrial, Computer & Communications Down-hole Data Recorder Environmental Controls Handheld Inventory Control Telemetry Military & Aerospace Communications Smart Munitions Timing Devices (Fuzes) Surveillance Devices see below THICKNESS (DIM C) MAXIMUM GLASS LID inches SM1 SM2/SM4 SM3/SM5 0.039 0.041 0.044 mm 0.99 1.04 1.12 CERAMIC LID inches 0.053 0.055 0.058 mm 1.35 1.40 1.47 10117 - Rev B S YS ERT T E M C IFIC T A RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de 01 Pb N IO IS O 90 SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Fundamental Frequency Motional Resistance R1 (Ω) Motional Capacitance C1 (fF) Quality Factor Q (k) Shunt Capacitance C0 (pF) Calibration Tolerance1 Load Capacitance Drive Level Frequency-Temperature Stability1,3 Aging, first year3 Shock, survival 4 2 10 MHz 32 MHz 155.52 MHz 60 2.8 95 1.4 + _ 25 6.2 30 2.3 10 4.0 30 2.3 Designation SM1 SM2 SM3 SM4 SM5 Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 260OC for 20 sec. Max Process Temperature 100 ppm, or tighter as required SUGGESTED LAND PATTERN 0.070 (1.78) 20 pF for f ≤ 50 MHz 10 pF for f > 50 MHz 500 µW MAX for f ≤ 50 MHz 200 µW MAX for f > 50 MHz + _ 50 ppm to + 10 ppm (Commercial) _ + _ 100 ppm to + 20 ppm (Industrial) _ + _ 100 ppm to + 30 ppm (Military) _ 5 ppm MAX (below 1 ppm available) 0.120 (3.05) 3,000 g, 0.3 ms, 1/2 sine 20 g, 10-2,000 Hz swept sine inches (mm) 0.215 (5.46) Vibration, survival5 Operating Temp. Range EQUIVALENT CIRCUIT -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) -55OC to +125OC 260OC for 20 sec. C0 1 L1 C1 R1 2 Storage Temp. Range Max Process Temperature 1. Other tolerances available. Contact factory. 2. Unless specified otherwise. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies contact factory. 5. Higher shock version available. 6. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance PACKAGING • Tray Pack • Tape and Reel Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX6SM AT CRYSTALS CX6 S C SM1 – 32.0M Frequency M = MHz , 100 Calibration Tolerance @ 25OC (in ppm) / 100 Frequency Stability over Temp. Range (in ppm) / — / I “S” if special or O.T. = 3rd Overtone Mode C = Ceramic Lid custom design. Blank = Fundamental Blank = Glass Lid Blank if Std. Mode SM1 = Gold Plated (Lead Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR — / — / 200 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10117 - Rev B S YS ERT T E M C IFIC T A RSG Electronic Components GmbH - Sprendlinger Landstr. 115 - 63069 Offenbach - Germany - www.rsg-electronic.de 01 Pb N IO IS O 90