LEA150F-24-H

厂商：
RSG
封装：
描述：
LEA150F-24-H - Rugged PCB type - RSG Electronic Components GmbH

数据手册：

下载LEA150F-24-H.pdf

立即购买

详情介绍
数据手册
价格&库存

LEA150F-24-H 数据手册

Rugged PCB type Ordering information LEA150F R LEA 150 1 2 3 F 4 -5 5 -O 1 Series name 2 Output wattage 3 Universal input 4 Output voltage 5 Optional C :with Coating G :Low leakage current J2:Mini terminal block R :with Remote ON/OFF S :with Chassis SN :with Chassis & cover Y :with Potentiometer Recommended Noise Filter NAC-06-472 High voltage pulse noise type : NAP series Low leakage current type : NAM series *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT *5 LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H LEA150F-30 LEA150F-48 99 150 153 150 150 153 151.2 151.2 150 153.6 3.3V 30A 5V 30A 9V 17A 12V 12.5A 15V 10A 18V 8.5A 24V 6.3A 24V 6.3(7.5)A 30V 5A 48V 3.2A SPECIFICATIONS LEA MODEL VOLTAGE[V] CURRENT[A] FREQUENCY[Hz] INPUT ACIN 100V ACIN 200V ACIN 100V POWER FACTOR ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] *1 LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *2 RIPPLE[mVp-p] -10 - 0C *2 0 to +50C *2 RIPPLE NOISE[mVp-p] -10 - 0C *2 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C DRIFT[mV] *3 START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT -RC *4 INPUT-FG OUTPUT-RC-FG *4 OUTPUT-RC *4 OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD EFFICIENCY[%] ACIN 100V ACIN 200V OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H AC85 - 264 1f or DC120 - 370 1.4 2.0typ 0.7 1.0typ 50/60 (47 - 63) or DC 71typ 76typ 79typ 78typ 80typ 81typ 81typ 81typ 74typ 79typ 82typ 81typ 83typ 84typ 84typ 84typ 0.98typ 0.99typ 0.91typ 0.94typ 15typ (Io=100%) (At cold start) (Ta=25 C) 30typ (Io=100%) (At cold start) (Ta=25 C) 0.75max (60Hz, According to IEC60950 and DEN-AN) 3.3 5 9 12 15 18 24 24 30 30 17 12.5 10 8.5 6.3 6.3 (Peak 7.5) 20max 20max 36max 48max 60max 72max 96max 96max 40max 40max 100max 100max 120max 120max 150max 150max 80max 80max 120max 120max 120max 120max 120max 120max 140max 140max 160max 160max 160max 160max 160max 160max 120max 120max 150max 150max 150max 150max 150max 150max 160max 160max 180max 180max 180max 180max 180max 180max 50max 50max 90max 120max 150max 180max 240max 240max 60max 60max 120max 150max 180max 200max 290max 290max 20max 20max 36max 48max 60max 72max 96max 96max 500max (ACIN 100V, Io=100%) 20typ (Io=100%) 2.85 - 3.6 Fixed ("Y"which can be adjusted the output is available as optional:t10%) 3.25 - 3.35 4.9 - 5.3 8.6 - 9.4 11.5 - 12.5 14.4 - 15.6 17.3 - 18.7 23.0 - 25.0 23.0 - 25.0 Works over 105% of rating (works over 105% of peak current at option -H) and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating Not provided Not provided Option (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input) Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 75X40X222mm (WXHXD) /500g max (without chassis and cover) Convection *4 *5 * * with the input voltage held constant at the rated input/output. Applicable when remote control (optional) is added. ( ): peak current. Parallel operation with other model is not possible. Derating is required when operated with chassis and cover. LEA150F-30 LEA150F-48 84typ 87typ 84typ 87typ 30 5 120max 180max 120max 160max 150max 180max 300max 360max 120max 48 3.2 192max 300max 150max 200max 350max 400max 480max 600max 192max 28.5 - 31.5 46.0 - 50.0 *1 Peak load for 10 sec. or less is acceptable if the total wattage is less than the rated wattage. *2 This is the value that measured on measuring board with capacitor of 22mF within 150mm from output terminal. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, E-24 LEA150F External view Name plate 4-º3.5 Mounting Hole CN3 C1 19 Output () 2-º4.5 + 235-0.5 8 4-M4 Mounting Hole + 55-0.5 + 65-0.5 + 35-0.5 75 Output + () RC (-)RC (+) CN2 CN2 5 Connector for Remote CN4 ON/OFF (Optional) 29.5 Voltage adjust (Optional) 5 + 212-0.5 222 º4.5 252 + 235-0.5 8 4.5 20 15 51 37 (Lead) 3max PCB t=1.6 2-M4 Mounting Hole PIN CONNECTION I / O Connector Mating Connector CN1 B3P5-VH CN2 B6P-VH CN3 B7P-VH CN4 B2B-XH-A VHR-5N VHR-6N VHR-7N XHP-2 Terminal Chain : SVH-21T-P1.1 Loose: BVH-21T-P1.1 Chain : SVH-21T-P1.1 Loose: BVH-21T-P1.1 Chain : SVH-21T-P1.1 Loose: BVH-21T-P1.1 Chain : SXH-001T-P0.6 Loose: BXH-001T-P0.6 (Mfr: J.S.T.) Pin No. Input 1 AC(L) 2 CN1 3 AC(N) 4 5 FG Pin No. Output CN2 CN3 1~6 1~7 +V Optional Pin No. Remote ON/OFF 1 CN4 -V 2 RC(-) RC(+) ¶Keep drawing current per pin below 5A for CN2, CN3 ¶Weight: 500g or less (Without chassis and cover) ¶Tolerance: t1 ¶Dimensions in mm. ¶PCB Material: Glass composite (CEM3) ¶Chassis and cover is optional. ¶Chassis and cover is not available to remote ON/OFF unit. ¶Mounting torque: 1.5N · m(16kgf · cm)max 4.5 85 FG AC (N) AC (L) CN3 CN1 42 CN1 15 25 LEA Performance data ¡RISE TIME & FALL TIME (LEA150F-5) ¡EFFICIENCY (LEA150F-5) 82 80 EFFICIENCY 78 DC Output AC Input ACIN 100V Io=100% 76 Load factor100% Load factor 50% 50ms/DIV 74 60 100 140 180 220 260 300 INPUT VOLTAGE V ¡INPUT HARMONIC CURRENT (LEA150F-5) 10 ¡INPUT HARMONIC CURRENT (LEA150F-5) 10 A HARMONIC CURRENT HARMONIC CURRENT 1 Load factor 100% Input voltage AC 100V A Harmonic current standard class A (at odd number) 1 Harmonic current standard class A (at odd number) Load factor 100% Input voltage AC 230V 0.1 0.1 0.01 0.01 0.001 0 10 20 30 40 0.001 0 10 20 30 40 HARMONIC ORDER HARMONIC ORDER Distribution: RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de ■ ■ ■ ■ ■ E-25 Änderungen vorbehalten / subject to change without notice

下载 PDF

LEA150F-24-H

1. 物料型号： - 型号包括LEA150F-3R3-Y、LEA150F-5、LEA150F-9、LEA150F-12、LEA150F-15、LEA150F-18、LEA150F-24、LEA150F-24-H、LEA150F-30、LEA150F-48等。

2. 器件简介： - 该文档描述的是一种高耐压脉冲噪声型NAP系列和低漏电流通NAM系列的噪声滤波器，推荐与多个设备连接使用。

3. 引脚分配： - CN1: 1/0连接器，配对连接器VHR-5N，终端SVH-21T-P1.1。 - CN3: 7P-VH，VHR-7N，链式SVH-21T-P1.1，松式BVH-21T-P1.1。 - CN4: B2B-XH-A，XHP-2，链式SXH-001T-P0.6，松式BXH-001T-P0.6。 - CN1: 1-5脚分别对应AC(L)、AC(N)、FG。 - CN2: 1-6脚为+V输出。 - CN3: 1-7脚为-V输出。 - CN4: 1-2脚为RC(+)和RC(-)。

4. 参数特性： - 输入电压：AC85-264V或DC120-370V。 - 输入电流：AC100V时1.4A典型值，AC200V时0.7A典型值。 - 频率：50/60Hz或DC。 - 效率：AC100V时71%典型值，AC200V时74%典型值。 - 功率因数：AC100V时0.98典型值，AC200V时0.91典型值。 - 漏电流：AC200V时30mA典型值。 - 电压：3.3V、5V、9V、12V、15V、18V、24V、30V、48V。 - 线路调整：不同电压下有不同的调整值。 - 负载调整：不同电压下有不同的调整值。 - 纹波：不同温度和电压下有不同的最大值。 - 纹波噪声：不同温度和电压下有不同的最大值。 - 温度调整：不同温度下有不同的最大值。 - 启动时间：不同型号有不同的毫秒值。 - 保持时间：不同型号有不同的毫秒典型值。 - 输出电压调整范围：2.85-3.6V固定，可调输出为可选。 - 输出电压设置：不同型号有不同的设置范围。

5. 功能详解： - 过流保护：工作在额定值105%以上，自动恢复。 - 过压保护：工作在额定值115-140%。 - 远程感应和远程开/关：未提供，为可选功能。

6. 应用信息： - 适用于需要高耐压和低漏电流的应用场合。

7. 封装信息： - 尺寸：75X40X222mm（WXHXD），重量最大500g（不包括底盘和盖子）。 - 冷却方式：自然对流。

LEA150F-24-H 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“LEA150F-24-H”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

LEA150F-24-H

相关技术文章