16JEV100M6.3X5.5

JEV CHIP ALUMINUM ELECTROLYTIC CAPACITORS JEV SERIES 85oC Standard, High Temperature Reflow Soldering. FEATURES •Case Dia φ 4∼ φ10mm • RoHS compliance. •High Temperature reflow soldering is available. •Available for high density mounting. SPECIFICATIONS Items Characteristics Category Temperature Range -40 ∼ +85°C Rated Voltage Range 6.3∼50V.DC + 20％(20°C,120Hz) - Capacitance Tolerance I=0.01CV or 3 µA whichever is greater. (After 2 minutes application of rated voltage) Leakage Current(MAX) I=Leakage Current(µA) Dissipation Factor(MAX) (tanδ) C=Rated Capacitance(µF) V=Rated Voltage(V) www.BDTIC.com/Rubycon (20°C,120Hz) Rated Voltage 6.3 10 16 25 35 50 (V) φ4,φ5,φ6.3×5.5 0.26 0.22 0.18 0.16 0.13 0.12 tanδ φ6.3×8,φ8∼ φ10 0.35 0.26 0.20 0.16 0.14 0.12 After applying rated voltage with rated ripple current for 2000 hrs at 85°C, the capacitors shall meet the following requirements. Endurance Capacitance Change + 25% of the initial value. Within - Dissipation Factor Not more than 200% of the specified value. Leakage Current Not more than the specified value. Rated Voltage (V) Z(-25°C)/Z(20°C) Z(-40°C)/Z(20°C) Low Temperature Stability Impedance Ratio(MAX) 6.3 10 16 25 35 50 4 3 2 2 2 2 8 8 4 4 3 3 (120Hz) MARKING MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency(Hz) 0.1∼ 1µF 2.2∼ 4.7µF Coefficient 10∼ 47µF 100∼ 1000µF 60(50) 120 0.50 0.65 0.80 0.80 1.00 1.00 1.00 1.00 500 1k 10k < = 1.20 1.20 1.20 1.10 1.30 1.30 1.30 1.15 1.50 1.50 1.50 1.20 ロットNo. Lot No. AA 47 CJE Capacitance Series Polarity of the terminals JEV Series D ×L Rated Capacitance Capacitance Tolerance Option Rated Voltage 6.3 (V) Rated Voltage code Rated voltage code∗ PART NUMBER Rated Voltage ∗Voltage Code Case Size j 10 16 25 35 50 A C E V H JEV CHIP ALUMINUM ELECTROLYTIC CAPACITORS DIMENSIONS (mm) φD L A1 B1 C W1 P 4 5.5 4.3 4.3 1.8 0.5∼ 0.8 1.0 C 5 5.5 5.3 5.3 2.2 0.5∼ 0.8 1.3 P + LMAX 6.3 5.5 6.6 6.6 2.7 0.5∼ 0.8 1.8 6.3 8 6.6 6.6 2.7 0.5∼ 0.8 1.8 8 10.5 8.3 8.3 2.9 0.8∼ 1.1 3.1 10 10.5 10.3 10.3 3.2 0.8∼ 1.1 4.5 C + B1 -0.2 φD+0.5MAX A1 -0.2 W1 0.3MAX 0.5MAX STANDARD SIZE Size φD×L(mm), Ripple Current (mA r.m.s./85°C, 120Hz) WV(V.DC) Cap(µF) 6.3 (0J) Size 10 (1A) Ripple Size 16 (1C) Ripple Size 25 (1E) Ripple Ripple 0.1 4×5.5 1.0 0.22 4×5.5 2.0 Size Ripple 4×5.5 2.8 0.47 4×5.5 4.0 1 4×5.5 8.4 2.2 4v5.5 14 3.3 4×5.5 17 4×5.5 18 5×5.5 22 5×5.5 30 6.3×5.5 35 6.3×5.5 48 www.BDTIC.com/Rubycon 0.33 4×5.5 4.7 10 4×5.5 25 22 4×5.5 5×5.5 30 39 5×5.5 43 5×5.5 50 6.3×5.5 60 4×5.5 29 33 100 Ripple 50 (1H) Size 47 Size 35 (1V) 5×5.5 5×5.5 6.3×5.5 43 46 71 220 6.3×5.5 71 6.3×5.5 86 6.3×8 175 8×10.5 290 8×10.5 330 10×10.5 8×10.5 10×10.5 670 385 690 330 6.3×8 190 8×10.5 330 470 8×10.5 380 8×10.5 10×10.5 380 680 1000 10×10.5 700 4×5.5 18 25 4×5.5 18 5×5.5 30 6.3×5.5 48 6.3×5.5 54 6.3×5.5 58 6.3×5.5 60 6.3×8 105 6.3×8 145 8×10.5 10×10.5 280 480 10×10.5 570 8×10.5 300 10×10.5 560 10×10.5 680 6.3×8 95 8×10.5 200 8×10.5 240 10×10.5 280 8×10.5 10×10.5 320 500