16JKV470M10X10.5

JKV CHIP ALUMINUM ELECTROLYTIC CAPACITORS JKV SERIES 105oC Standard, High Temperature Reflow Soldering. FEATURES • RoHS compliance. • Load Life : 105°C 1000 hours. • High Temperature reflow soldering is available. • Available for high density mounting. SPECIFICATIONS Items Characteristics Category Temperature Range -55 ∼ +105°C 6.3∼50V.DC Rated Voltage Range + - Capacitance Tolerance I=0.01CV or 3µA whichever is greater. 20%(20°C, 120Hz) (After 2 minutes application of rated voltage) Leakage Current(MAX) I=Leakage Current(µA) Dissipation Factor(MAX) (tanδ) C=Rated Capacitance(µF) V=Rated Voltage(V) www.BDTIC.com/Rubycon Rated Voltage 6.3 10 16 25 35 50 (V) φ 4∼φ 6.3 0.30 0.24 0.20 0.16 0.14 0.12 tanδ φ 8, φ 10 0.35 0.26 0.20 0.16 0.14 0.12 (20°C,120Hz) After applying rated voltage with rated ripple current for 1000 hrs at 105°C, the capacitors shall meet the following requirements. Endurance Low Temperature Stability Impedance Ratio(MAX) Capacitance Change + 30% of the initial value. (φ8,10: +25%) Within - Dissipation Factor Not more than 300% of the specified value. (φ8,10:200%) Leakage Current Not more than the specified value. Rated Voltage 6.3 (V) Z(-25°C)/Z(20°C) 4 Z(-40°C)/Z(20°C) 8 10 16 25 35 50 3 2 2 2 2 8 4 4 3 3 MARKING MULTIPLIER FOR RIPPLE CURRENT Frequency coefficient Frequency 60(50) 120 (Hz) 0.1∼ 1µF 0.50 1.00 2.2∼ 4.7µF 0.65 1.00 Coefficient 10∼ 47µF 0.80 1.00 100∼ 1000µF 0.80 1.00 (120Hz) 500 1k < 10k = 1.20 1.20 1.20 1.10 1.30 1.30 1.30 1.15 1.50 1.50 1.50 1.20 AA 47 CJK Lot No. Capacitance Series Rated voltage code∗ Polarity of the terminals PART NUMBER JKV Rated Voltage Series D ×L Rated Capacitance Capacitance Tolerance Option Case Size ∗Voltage Code Rated Voltage 6.3 (V) 10 16 25 35 50 Rated Voltage code A C E V H j JKV CHIP ALUMINUM ELECTROLYTIC CAPACITORS DIMENSIONS (mm) + L MAX A1- 0.2 φD L A1 B1 C W1 P 5.5 4.3 4.3 1.8 0.5∼ 0.8 1.0 5 5.5 5.3 5.3 2.2 0.5∼ 0.8 1.3 6.3 5.5 6.6 6.6 2.7 0.5∼ 0.8 1.8 10.5 8.3 8.3 2.9 0.8∼ 1.1 3.1 10 10.5 10.3 10.3 3.2 0.8∼ 1.1 4.5 8 C + P B1 -0.2 φD+0.5MAX C 4 0.3MAX W1 0.5MAX STANDARD SIZE Size φ D×L(mm), Ripple Current (mA r.m.s./105°C, 120Hz) WV(V.DC) Cap(µF) 6.3 (0J) Size 10 (1A) Ripple Size 16 (1C) Ripple Size 25 (1E) Ripple Size 35 (1V) Ripple Size Ripple 0.1 4×5.5 1.0 0.22 4×5.5 2.0 Ripple 4×5.5 3.0 0.47 4×5.5 4.0 1 4×5.5 8.0 2.2 4×5.5 11 3.3 4×5.5 13 www.BDTIC.com/Rubycon 0.33 4.7 10 22 Size 50 (1H) 4×5.5 23 33 5×5.5 4×5.5 14 5×5.5 18 6.3×5.5 28 8×10.5 135 8×10.5 10×10.5 8×10.5 10×10.5 155 180 200 315 4×5.5 20 5×5.5 24 5×5.5 31 6.3×5.5 46 34 6.3×5.5 48 47 5×5.5 37 6.3×5.5 56 100 6.3×5.5 57 6.3×5.5 65 8×10.5 180 8×10.5 10×10.5 180 305 8×10.5 185 8×10.5 10×10.5 190 353 10×10.5 360 10×10.5 450 220 330 470 8×10.5 210 1000 10×10.5 480 8×10.5 195 8×10.5 10×10.5 195 440 8×10.5 10×10.5 210 440 10×10.5 460