250MXG1500MLCALN35X45

Messrs. ONSTONE ALUMINUM ELECTROLYTIC CAPACITORS SPECIFICATION SHEET CUSTOMER PART No. Rubycon PART No. 250 MXG 1500 M LCA LN 35X45 DRAWING No. REE – 046206 ISSUE DATE ISSUE No. 1 17 June 2014 RUBYCON CORPORATION ENGINEERING DIVISION 1938-1, NISHIMINOWA, INA-SHI, NAGANO-KEN, JAPAN TEL No. +81-265-72-7116 FAX No. +81-265-73-3380 KAZUNORI OYABE DESIGN HIROKAZU HORIKAWA CHECK YUZO SHIBA APPROVAL PAGE Customer Part Number Rubycon Part Number Style Operating Temperature Range The General Standard Fixed aluminum electrolytic capacitors for use in electronic equipment 1/2 250 MXG 1500 M LCA LN 35X45 CE692 -40°C~+105°C JIS C 5141(1991) ＜DIMENSIONS OF TERMIANL ＞ 1.Dimensions (unit:mm) 3.0 ±0.1 5.0 ± 1.0 2.4 ±0.1 ±0.1 0.6 5.5 ± 0 . 1 Sleeve Terminal Case 4.5 Negative Sine 印 ±0.1 ±0.1 X6 .0 14.5 ±0.1 2-1 14.2 Pressure Relief Vent ±0.1 5.0 ±2 45 4.2 ±1 ±1 5.0 ±1 φ35 φ35 ＜P.C. BOARD DIMENSIONS ＞ Name Material Appearance Sleeve P.E.T. Black Case Al Seal Rubber-laminated bakelite Terminal SPCC(Tin plating) 2.Electrical Performance Nominal Capacitance Capacitance Tolerance Rated Voltage Surge Voltage (µF) (%) (V.DC) (V.DC) 20°C/120Hz 20°C/120Hz 1500 -20 ~ +20 250 300 Leakage Current Max./5min. (µA) tanδ Max. Rated Ripple Current (A r.m.s.) 20°C 20°C/120Hz 105°C/120Hz 1837 0.20 3.28 3.Marking:Unless otherwise specified,capacitor shall be clearly marked on its body. (1)Brand (2)Mark Indicating Electrolytic Capacitor (3)Maximum Operating Temperature (4)Rated Voltage CE 105 C (5)Nominal Capacitance (Tolerance) 250V 1500µ F(M) (6)Series (Sleeve material) MXG(PET) (7)Polarity (8)Lot No. Lot No. 4.Temperature Characteristics (Impedance ratio at 120Hz) 15 MAX. Z (-40°C)/Z (20°C): 4 MAX. Z (-25°C)/Z (20°C): DRAWING No. ISSUE No. REE - 046206 1 250 MXG 1500 M LCA LN 35X45 RUBYCON CORPORATION PAGE 2/2 5.Load Life Test After 3000 + 72/0 hours application of D.C. rated working voltage with full rated ripple current at 105±2°C, the capacitor shall meet the following requirements. Capacitance Change :Within ±20% of the initial value Dissipation Factor : Not more than 200% of the specified value Leakage Current : Not more than the specified value 6.Notes (on the use of aluminum electrolytic capacitors) (1)Charge and discharge Do not use for a circuit where rapid charge and discharge is frequently repeated. (2)Insulation Aluminum electrolytic capacitors are covered with P.E.T. sleeve which purpose is mainly indication of necessary items. The case of capacitor and the cathode terminal are not insulated. (3)Polarity Please confirm the polarity before use because this capacitor has polarity. ∗Guide to application except the above are described in our catalog and EIAJ RCR-2367C. EIAJ RCR-2367C: “Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment” DRAWING No. ISSUE No. REE - 046206 1 250 MXG 1500 M LCA LN 35X45 RUBYCON CORPORATION