400USG390MEFASN35X30

Messrs. ONSTONE ALUMINUM ELECTROLYTIC CAPACITORS SPECIFICATION SHEET CUSTOMER PART No. Rubycon PART No. 400 USG 390 M EFA SN 35X30 DRAWING No. REE – 045863 ISSUE DATE ISSUE No. 1 31 October 2013 RUBYCON CORPORATION ENGINEERING DIVISION 1938-1, NISHIMINOWA, INA-SHI, NAGANO-KEN, JAPAN TEL No. +81-265-72-7116 FAX No. +81-265-73-3380 KAZUNORI OYABE DESIGN HIROKAZU HORIKAWA CHECK YUZO SHIBA APPROVAL PAGE Fixed aluminum electrolytic capacitors for use in electronic equipment Customer Part Number Rubycon Part Number Style Operating Temperature Range The General Standard 1.Dimensions (unit:mm) +/-0.1 1.5 1.5 Sleeve Pressure Relief Vent Terminal Case 3.5 400 USG 390 M EFA SN 35X30 CE692 -25°C~+85°C JIS C 5141(1991) +/-0.3 +/- 0.5 Negative Sign +/-0.1 0.8 1/2 +/-0.1 10 2- φ 2 +/-2 30 +/-1 +/-1 φ 35 φ 35 < P.C.BOARD DIMENSIONS > Name Material Appearance Sleeve P.E.T. Black Case Al Seal Rubber-laminated bakelite Terminal SPCC(Tin plating) 2.Electrical Performance Nominal Capacitance Capacitance Tolerance Rated Voltage Surge Voltage (µF) 20°C/120Hz (%) (V.DC) (V.DC) 20°C/120Hz 390 -20 ~ +20 400 Leakage Current Max./5min. (µA) 20°C 20°C/120Hz 85°C/120Hz 1184 0.20 2.13 450 tanδ Max. Rated Ripple Current (A r.m.s.) 3.Marking:Unless otherwise specified,capacitor shall be clearly marked on its body. (1)Brand (2)Mark Indicating Electrolytic Capacitor (3)Maximum Operating Temperature (4)Rated Voltage CE 85 C (5)Nominal Capacitance (Tolerance) 400V 390µ F(M) (6)Series (Sleeve material) (7)Polarity USG (PET) (8)Lot No. Lot No. 4.Temperature Characteristics (Impedance ratio at 120Hz) 8 MAX. Z (-25°C)/Z (20°C): 5.Load Life Test After 3000 + 72/0 hours application of D.C. rated working voltage with full rated ripple current at 85±2°C, the capacitor shall meet the following requirements. Capacitance Change :Within ±20% of the initial value Dissipation Factor : Not more than 200% of the specified value Leakage Current : Not more than the specified value DRAWING No. ISSUE No. REE - 045863 1 400 USG 390 M EFA SN 35X30 RUBYCON CORPORATION PAGE 2/2 6.Notes (on the use of aluminum electrolytic capacitors) (1)Charge and discharge Do not use for a circuit where rapid charge and discharge is frequently repeated. (2)Insulation Aluminum electrolytic capacitors are covered with P.E.T. sleeve which purpose is mainly indication of necessary items. The case of capacitor and the cathode terminal are not insulated. (3)Polarity Please confirm the polarity before use because this capacitor has polarity. ∗Guide to application except the above are described in our catalog and EIAJ RCR-2367C. EIAJ RCR-2367C: “Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment” DRAWING No. ISSUE No. REE - 045863 1 400 USG 390 M EFA SN 35X30 RUBYCON CORPORATION