74LVC07APW-Q100J

74LVC07A-Q100 Hex buffer with open-drain outputs Rev. 2 — 14 December 2018 Product data sheet 1. General description The 74LVC07A-Q100 provides six non-inverting buffers. The outputs are open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V applications. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits • • • • • • • • Automotive product qualification in accordance with AEC-Q100 (Grade 1) • Specified from -40 °C to +85 °C and from -40 °C to +125 °C 5 V tolerant inputs and outputs (open-drain) for interfacing with 5 V logic Wide supply voltage range from 1.2 V to 5.5 V CMOS low power consumption Direct interface with TTL levels Inputs accept voltages up to 5 V Complies with JEDEC standard: • JESD8-7A (1.65 V to 1.95 V) • JESD8-5A (2.3 V to 2.7 V) • JESD8-C/JESD36 (2.7 V to 3.6 V) ESD protection: • MIL-STD-883, method 3015 exceeds 2000 V • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-A exceeds 200 V (C = 200 pF; R = 0 Ω) 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC07AD-Q100 -40 °C to +125 °C SO14 plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 74LVC07APW-Q100 -40 °C to +125 °C TSSOP14 plastic thin small outline package; 14 leads; body width 4.4 mm SOT402-1 74LVC07ABQ-Q100 -40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal SOT762-1 enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 4. Functional diagram 1 1A 1Y 2 3 2A 2Y 4 5 3A 3Y 6 9 4A 4Y 8 11 5A 5Y 10 1A 2A 3A 4A 5A 13 6A 6Y 12 6A 1 1 2 3 1 4 5 1 6 9 1 8 11 1 10 13 1 12 2Y 3Y 4Y Y 5Y A 6Y GND mna533 mna534 mna535 Fig. 1. 1Y Logic symbol Fig. 2. IEC logic symbol Fig. 3. Logic diagram for one gate 5. Pinning information 5.1. Pinning 1 1A terminal 1 index area 1Y 2 2A 3 12 6Y 2Y 4 11 5A 14 VCC 3A 5 3Y 6 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y Product data sheet 4A 001aad067 (1) This is not a supply pin. The substrate is attached to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this pad.However, if it is soldered, the solder land should remain floating or be connected to GND. Pin configuration for SO14 and TSSOP14 74LVC07A_Q100 10 5Y Transparent top view 001aad066 Fig. 4. 13 6A 9 8 2 4Y 1Y GND(1) 7 1 GND 74LVC07A 1A 14 VCC 74LVC07A Fig. 5. Pin configuration for DHVQFN14 All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 2 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 5.2. Pin description Table 2. Pin description Symbol Pin Description 1A, 2A, 3A, 4A, 5A, 6A 1, 3, 5, 9, 11, 13 data input 1Y, 2Y, 3Y, 4Y, 5Y, 6Y 2, 4, 6, 8, 10, 12 data output GND 7 ground (0 V) VCC 14 supply voltage 6. Functional description Table 3. Function selection H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state Input Output nA nY L L H Z 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Min Max Unit VCC supply voltage IIK input clamping current -0.5 +6.5 V -50 - VI input voltage -0.5 +6.5 IOK output clamping current VO < 0 V -50 - VO output voltage active mode [2] -0.5 +6.5 V high-impedance mode IO output current [2] -0.5 +6.5 V - 50 mA ICC supply current - 100 mA IGND ground current -100 - mA Ptot total power dissipation - 500 mW Tstg storage temperature -65 +150 °C [1] [2] [3] Conditions VI < 0 V [1] VO = 0 V to VCC Tamb = -40 °C to +125 °C [3] mA V mA The minimum input voltage ratings may be exceeded if the input current ratings are observed. The output voltage ratings may be exceeded if the output current ratings are observed. For SO14 packages: above 70 °C derate linearly with 8 mW/K. For TSSOP14 packages: above 60 °C derate linearly with 5.5 mW/K. For DHVQFN14 packages: above 60 °C derates linearly with 4.5 mW/K. 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 3 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 8. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VCC 1.65 - 5.5 V 1.2 - - V 0 - 5.5 V active mode 0 - 5.5 V high-impedance mode 0 - 5.5 V -40 - +125 °C VCC = 1.65 V to 2.7 V 0 - 20 ns/V VCC = 2.7 V to 5.5 V 0 - 10 ns/V supply voltage functional VI input voltage VO output voltage Tamb ambient temperature Δt/ΔV input transition rise and fall rate 9. Static characteristics Table 6. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter VIH VIL VOL Conditions -40 °C to +85 °C HIGH-level input VCC = 1.2 V voltage VCC = 1.65 V to 1.95 V Min Typ[1] Max Min Max Unit 1.08 - - 1.08 - V 0.65 × VCC - - 0.65 × VCC - V VCC = 2.3 V to 2.7 V 1.7 - - 1.7 - V VCC = 2.7 V to 3.6 V 2.0 - - 2.0 - V VCC = 4.5 V to 5.5 V 0.7 × VCC - - 0.7 × VCC - V - - 0.12 - 0.12 V - - 0.35 × VCC - VCC = 2.3 V to 2.7 V - - 0.7 - 0.7 V VCC = 2.7 V to 3.6 V - - 0.8 - 0.8 V VCC = 4.5 V to 5.5 V - - 0.30 × VCC - IO = 100 μA; VCC = 1.65 V to 5.5 V - - 0.20 - 0.3 V IO = 4 mA; VCC = 1.65 V - - 0.45 - 0.6 V IO = 8 mA; VCC = 2.3 V - - 0.3 - 0.75 V IO = 12 mA; VCC = 2.7 V - - 0.4 - 0.6 V IO = 24 mA; VCC = 3.0 V - - 0.55 - 0.8 V IO = 32 mA; VCC = 4.5 V - - 0.55 - 0.8 V LOW-level input VCC = 1.2 V voltage VCC = 1.65 V to 1.95 V LOW-level output voltage -40 °C to +125 °C 0.35 × VCC V 0.30 × VCC V VI = VIH or VIL II input leakage current VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V - ±0.1 ±5 - ±20 μA IOZ OFF-state output current VI = VIH; VO = 5.5 V or GND; VCC = 1.65 V to 5.5 V - ±0.1 ±10 - ±20 μA IOFF power-off VI or VO = 5.5 V; VCC = 0 V leakage current - ±0.1 ±10 - ±20 μA ICC supply current - 0.1 10 - 40 μA 74LVC07A_Q100 Product data sheet VI = VCC or GND; IO = 0 A; VCC = 5.5 V All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 4 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs Symbol Parameter Conditions -40 °C to +85 °C -40 °C to +125 °C Min Typ[1] Max Min Max Unit ΔICC additional supply current per input pin; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.7 V to 5.5 V - 5 500 - 5000 μA CI input capacitance VCC = 0 V to 5.5 V; VI = GND to VCC - 5.0 - - - pF [1] All typical values are measured at VCC = 3.3 V (unless stated otherwise) and Tamb = 25 °C. 10. Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Fig. 7. Symbol Parameter Conditions tPZL nA to nY; see Fig. 6 OFF-state to LOW propagation delay tPLZ LOW to OFF-state propagation delay CPD [1] [2] power dissipation capacitance -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ [1] Max Min Max - 8.0 - - - ns VCC = 1.65 V to 1.95 V 0.5 1.7 5.5 0.5 6.5 ns VCC = 2.3 V to 2.7 V 0.5 1.2 2.8 0.5 3.5 ns VCC = 2.7 V 0.5 1.8 3.3 0.5 4.5 ns VCC = 3.0 V to 3.6 V 0.5 1.2 3.6 0.5 4.5 ns VCC = 4.5 V to 5.5 V 0.5 1.6 2.6 0.5 3.5 ns - 10 - - - ns VCC = 1.65 V to 1.95 V 0.5 3.0 5.5 0.5 6.5 ns VCC = 2.3 V to 2.7 V 0.5 1.7 2.8 0.5 3.5 ns VCC = 2.7 V 0.5 2.1 3.3 0.5 4.5 ns VCC = 3.0 V to 3.6 V 0.5 2.5 3.6 0.5 4.5 ns VCC = 4.5 V to 5.5 V 0.5 1.6 2.6 0.5 3.5 ns VCC = 1.65 V to 1.95 V - 6.5 - - - pF VCC = 2.3 V to 2.7 V - 6.9 - - - pF VCC = 3.0 V to 3.6 V - 7.2 - - - pF VCC = 1.2 V nA to nY; see Fig. 6 VCC = 1.2 V per buffer; VI = GND to VCC [2] Typical values are measured at Tamb = 25 °C and VCC = 1.2 V, 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively. CPD is used to determine the dynamic power dissipation (PD in μW). 2 2 PD = CPD x VCC x fi x N + Σ(CL x VCC x fo) where: fi = input frequency in MHz; fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in Volts N = number of inputs switching 2 Σ(CL x VCC x fo) = sum of the outputs 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 5 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 10.1. Waveforms and test circuit VI VM nA input VM GND t PLZ t PZL VCC nY output VM VX VOL mna528 Measurements points are given in Table 8. Logic level: VOL is a typical output voltage level that occurs with the output load. Fig. 6. The input (nA) to output (nY) propagation delays Table 8. Measurement points Supply voltage Input Output VCC VM VX < 2.7 V 0.5 × VCC VOL + 0.15 V ≥ 2.7 V to 3.6 V 1.5 V VOL + 0.3 V ≥ 4.5 V to 5.5 V 0.5 × VCC VOL + 0.3 V 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 6 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs tW VI 90 % negative pulse VM VM 10 % 0V VI tf tr tr tf 90 % positive pulse VM VM 10 % 0V tW VEXT VCC G VI RL VO DUT RT CL RL 001aae331 Test data is given in Table 9. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig. 7. Test circuit for measuring switching times Table 9. Test data Supply voltage Input Load VEXT VI tr, tf CL RL tPLH, tPHL tPLZ, tPZL tPHZ, tPZH 1.2 V VCC ≤ 2 ns 30 pF 1 kΩ open 2 × VCC GND 1.65 V to 1.95 V VCC ≤ 2 ns 30 pF 1 kΩ open 2 × VCC GND 2.3 V to 2.7 V VCC ≤ 2 ns 30 pF 500 Ω open 2 × VCC GND 2.7 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open 2 × VCC GND 3.0 V to 3.6 V 2.7 V ≤ 2.5 ns 50 pF 500 Ω open 2 × VCC GND 4.5 V to 5.5 V VCC ≤ 2.5 ns 50 pF 500 Ω open 2 × VCC GND 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 7 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 11. Package outline SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 A2 Q A (A 3) A1 pin 1 index θ Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 1.05 1.0 0.4 0.7 0.6 0.25 0.25 0.1 0.7 0.3 0.01 0.019 0.0100 0.35 0.014 0.0075 0.34 0.16 0.15 inches 0.010 0.057 0.069 0.004 0.049 0.05 0.244 0.039 0.028 0.041 0.228 0.016 0.024 0.01 0.01 0.028 0.004 0.012 θ o 8 o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT108-1 076E06 MS-012 Fig. 8. JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Package outline SOT108-1 (SO14) 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 8 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm D SOT402-1 E A X c y HE v M A Z 8 14 Q A2 pin 1 index (A 3 ) A1 A θ Lp 1 L 7 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.72 0.38 8o 0o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT402-1 Fig. 9. REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-18 MO-153 Package outline SOT402-1 (TSSOP14) 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 9 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm B D SOT762-1 A A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e v w b 2 6 C A B C y y1 C L 1 7 14 8 Eh e k 13 9 Dh X k 0 2 Dimensions (mm are the original dimensions) Unit max nom min mm A(1) 1 A1 b 0.05 0.30 0.02 0.25 0.00 0.18 4 mm scale c D(1) Dh E(1) Eh e e1 0.2 3.1 3.0 2.9 1.65 1.50 1.35 2.6 2.5 2.4 1.15 1.00 0.85 0.5 2 k L v 0.2 0.5 0.4 0.3 0.1 w y 0.05 0.05 y1 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. Outline version SOT762-1 References IEC JEDEC JEITA sot762-1_po European projection Issue date 15-04-10 15-05-05 MO-241 Fig. 10. Package outline SOT762-1 (DHVQFN14) 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 10 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs 12. Abbreviations Table 10. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model MIL Military TTL Transistor-Transistor Logic 13. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC07A _Q100 v.2 20181214 Product data sheet - 74LVC07A _Q100 v.1 Modifications: • • • 74LVC07A _Q100 v.1 74LVC07A_Q100 Product data sheet The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. Legal texts have been adapted to the new company name where appropriate. Table 5: Maximum output voltage (active mode) changed from VCC to 5.5 V 20121001 Product specification - All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 - © Nexperia B.V. 2018. All rights reserved 11 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. 14. Legal information Data sheet status Document status [1][2] Product status [3] Definition Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Product [short] data sheet Production This document contains the product specification. [1] [2] [3] Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 12 / 13 74LVC07A-Q100 Nexperia Hex buffer with open-drain outputs Contents 1. General description...................................................... 1 2. Features and benefits.................................................. 1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................2 5.1. Pinning.........................................................................2 5.2. Pin description............................................................. 3 6. Functional description................................................. 3 7. Limiting values............................................................. 3 8. Recommended operating conditions..........................4 9. Static characteristics....................................................4 10. Dynamic characteristics............................................ 5 10.1. Waveforms and test circuit........................................ 6 11. Package outline.......................................................... 8 12. Abbreviations............................................................ 11 13. Revision history........................................................11 14. Legal information......................................................12 © Nexperia B.V. 2018. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 14 December 2018 74LVC07A_Q100 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 14 December 2018 © Nexperia B.V. 2018. All rights reserved 13 / 13