www.jscj-elec.com
AD-DTA144E series
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
AD-DTA144E Series Digital Transistor (Built-In Resistors)
AD-DTA144EM/DTA144EE/DTA144EUA/DTA144EKA /DTA144ECA/DTA144ESA
Digital transistor (PNP)
FEATURES
Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see
equivalent circuit)
The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They
also have the advantage of almost completely eliminating parasitic effects.
Only the on/off conditions need to be set for operation, making device design easier
AEC-Q101 qualified
PIN CONNECTIONS
AD-DTA144EM
AD-DTA144EE
AD-DTA144EUA
AD-DTA144EKA
AD-DTA144ECA
AD-DTA144ESA
Version 1.0
1 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
EQUIVALENT CIRCUIT
ORDERING INFORMATION
Part number
Marking
Package
Packing method
Pack quantity
AD-DTA144EM
16
SOT-723
Reel
8000pcs/reel
AD-DTA144EE
16
SOT-523
Reel
3000pcs/reel
AD-DTA144EUA
16
SOT-323
Reel
3000pcs/reel
AD-DTA144EKA
16
SOT-23-3L
Reel
3000pcs/reel
AD-DTA144ECA
16
SOT-23
Reel
3000pcs/reel
AD-DTA144ESA
A144
E XXX 1)
TO-92S
Bulk
1000pcs/bag
AD-DTA144ESA-TA
A144
E XXX 1)
TO-92S
Tape
3000pcs/box
1)XXX = Date code
Version 1.0
2 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
MAXIMUM RATINGS (Tj = 25°C unless otherwise specified)
Parameter
Symbol
Value
M
E
UA
KA
Unit
CA
SA
Supply voltage
Vcc
-50
V
Input voltage
VIN
-40 ~ +10
V
Output current
IO
-30
mA
Peak collector current
ICM
-100
mA
Maximum power dissipation
PD
Operating junction and storage temperature range
100
150
Tj, Tstg
200
200
200
300
-55 ~ 150
mW
°C
ELECTRICAL CHARACTERISTICS (Tj = 25°C unless otherwise specified)
Parameter
Symbol
Test condition
Min
Typ
Max
Unit
VI(off)
VCC = -5V, IO = -100µA
-0.5
-
-
VI(on)
VO = -0.3V, IO = -2mA
-
-
-3
VO(on)
IO/II = -10mA/-0.5mA
-
-
-0.3
V
VI = -5V
-
-
-0.18
mA
IO(off)
VCC = -50V, VI = 0V
-
-
-0.5
µA
DC current gain
GI
VO = -5V, IO = -5mA
68
-
-
-
Input resistance
R1
-
32.9
47
61.1
kΩ
Resistance ratio
R2 /R1
-
0.8
1
1.2
-
-
250
-
MHz
Input voltage
Output voltage
Input current
Output current
Transition frequency
Version 1.0
II
fT
VO = -10V, IO = -5mA, f = 100MHz
3 / 17
V
2021-07-01
www.jscj-elec.com
AD-DTA144E series
TYPICAL CHARACTERISTICS
Version 1.0
4 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-723 PACKAGE OUTLINE DIMENSIONS
SOT-723 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
5 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-723 TAPE AND REEL
Version 1.0
6 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-523 PACKAGE OUTLINE DIMENSIONS
SOT-523 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
7 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-523 TAPE AND REEL
Version 1.0
8 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-323 PACKAGE OUTLINE DIMENSIONS
SOT-323 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
9 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-323 TAPE AND REEL
Version 1.0
10 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-23-3L PACKAGE OUTLINE DIMENSIONS
SOT-23-3L SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
11 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-23-3L TAPE AND REEL
Version 1.0
12 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-23 PACKAGE OUTLINE DIMENSIONS
SOT-23 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
13 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
SOT-23 TAPE AND REEL
Version 1.0
14 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
TO-92S PACKAGE OUTLINE DIMENSIONS
TO-92S SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
15 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
TO-92S PACKAGE TAPING DIMENSION
Version 1.0
16 / 17
2021-07-01
www.jscj-elec.com
AD-DTA144E series
PUBLISHED BY
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
13th Floor, C Block, Tengfei Building, Yan Chuang Yuan, Nanjing Jiangbei New Area, China
LEGAL DISCLAIMER
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples, hints or typical values stated herein and/or any information regarding the application of
the device, JSCJ hereby disclaims any and all warranties and liabilities of any kind, including without limitation,
warranties of non-infringement of intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning customer’s products and any use of
the product of JSCJ in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
INFORMATION
For further information on technology, delivery terms and conditions as well as prices, please contact your nearest
JSCJ office (www.jscj-elec.com).
WARNINGS
Due to technical requirements, products may contain dangerous substances. For information on the types in question,
please contact your nearest JSCJ office.
Except as otherwise explicitly approved by JSCJ in a written document signed by authorized representatives of JSCJ,
JSCJ’s products may not be used in any applications where a failure of the product or any consequences of the use
thereof can reasonably be expected to result in personal injury.
Version 1.0
17 / 17
2021-07-01
很抱歉,暂时无法提供与“AD-DTA144EM”相匹配的价格&库存,您可以联系我们找货
免费人工找货