CBT3253
Dual 1-of-4 FET multiplexer/demultiplexer
Rev. 3 — 22 November 2018
Product data sheet
1. General description
The CBT3253 is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer. The low
ON-resistance of the switch allows inputs to be connected to outputs without adding propagation
delay or generating additional ground bounce noise.
The select control inputs (S0, S1) can select the data path, when both output enable inputs (1OE,
2OE) are LOW. When nOE is HIGH, the switch terminals are in the high impedance OFF-state,
independent of S0 and S1.
The CBT3253 is characterized for operation from -40 °C to +85 °C.
2. Features and benefits
•
•
•
•
•
•
•
5 Ω switch connection between two ports
TTL-compatible input levels
Minimal propagation delay through the switch
Latch-up protection exceeds 100 mA per JEDEC standard JESD78 class II level A
ESD protection:
• HBM JESD22-A114E exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• CDM JESD22-C101C exceeds 1000 V
Multiple package options
Specified from -40 °C to +85 °C
3. Ordering information
Table 1. Ordering information
Type number
Temperature range
Package
Name
Description
Version
CBT3253D
-40 °C to +85 °C
SO16
plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
CBT3253DB
-40 °C to +85 °C
SSOP16
plastic shrink small outline package; 16 leads;
body width 5.3 mm
SOT338-1
CBT3253PW
-40 °C to +85 °C
TSSOP16
plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
4. Functional diagram
1A
7
6
1B1
5
1B2
4
1B3
3
2A
9
1B4
10
2B1
11
2B2
12
2B3
13
S0
S1
1OE
2OE
Fig. 1.
2B4
14
2
1
15
002aab828
Logic diagram
5. Pinning information
5.1. Pinning
CBT3253
1OE
1
16 VCC
S1
2
15 2OE
1B4
3
14 S0
1B3
4
13 2B4
1B2
5
12 2B3
1B1
6
11 2B2
1A
7
10 2B1
GND
8
9
Pin configuration SOT109-1 (SO16)
CBT3253
Product data sheet
1OE
1
16 VCC
S1
2
15 2OE
1B4
3
14 S0
1B3
4
13 2B4
1B2
5
12 2B3
1B1
6
11 2B2
1A
7
10 2B1
GND
8
2A
aaa-015422
Fig. 2.
CBT3253
9
2A
aaa-015423
Fig. 3.
Pin configuration SOT338-1 (SSOP16) and
SOT403-1 (TSSOP16)
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
2 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
5.2. Pin description
Table 2. Pin description
Symbol
Pin
Description
1OE, 2OE
1, 15
output enable (active LOW)
S1, S0
2, 14
select control input
1B4, 1B3, 1B2, 1B1
3, 4, 5, 6
1B outputs/inputs
1A
7
1A input/output
GND
8
ground (0 V)
2A
9
2A input/output
2B1, 2B2, 2B3, 2B4
10, 11, 12, 13
2B outputs/inputs
VCC
16
positive supply voltage
6. Functional description
Table 3. Function selection
H = HIGH voltage level; L = LOW voltage level; X = Don’t care.
Inputs
Switch
1OE
2OE
S1
S0
X
H
X
X
disconnect 1A to 1Bn and 2A to 2Bn
H
X
X
X
disconnect 1A to 1Bn and 2A to 2Bn
L
L
L
L
1A to 1B1 and 2A to 2B1
L
L
L
H
1A to 1B2 and 2A to 2B2
L
L
H
L
1A to 1B3 and 2A to 2B3
L
L
H
H
1A to 1B4 and 2A to 2B4
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
VCC
supply voltage
VI
input voltage
ISW
switch current
continuous current through each switch
IIK
input clamping current
VI < 0 V
Tstg
storage temperature
Ptot
total power dissipation
[1]
[2]
[3]
[1]
Min
Max
Unit
-0.5
+7.0
V
-0.5
+7.0
V
-
128
mA
-50
-
mA
-65
+150
°C
Tamb = -40 °C to +85 °C
SO16 package
[2]
-
500
mW
(T)SSOP16 package
[3]
-
500
mW
The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
For SO16 package: Ptot derates linearly with 8 mW/K above 70 °C.
For SSOP16 and TSSOP16 package: Ptot derates linearly with 5.5 mW/K above 70 °C.
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
3 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
8. Recommended operating conditions
Table 5. Operating conditions
All unused control inputs of the device must be held at VCC or GND to ensure proper device operation.
Symbol
Parameter
VCC
Conditions
Min
Max
Unit
supply voltage
4.5
5.5
V
VIH
HIGH-level input voltage
2.0
-
V
VIL
LOW-level input voltage
-
0.8
V
Tamb
ambient temperature
-40
+85
°C
operating in free-air
9. Static characteristics
Table 6. Static characteristics
Tamb = -40 °C to +85 °C.
Symbol
Parameter
Conditions
VIK
input clamping voltage
VCC = 4.5 V; II = -18 mA
Vpass
pass voltage
VI = VCC = 5.0 V; IO = -100 μA
II
input leakage current
VCC = 5.5 V; VI = GND or 5.5 V
ICC
supply current
VCC = 5.5 V; IO = 0 mA;
VI = VCC or GND
ΔICC
additional supply current
per input; VCC = 5.5 V; one input at
3.4 V, other inputs at VCC or GND
CI
input capacitance
Cio(off)
off-state input/output capacitance
Cio(on)
on-state input/output capacitance
RON
ON resistance
VCC = 4.5 V
[1]
[2]
[3]
Min
Typ[1]
Max
Unit
-
-
-1.2
V
3.6
3.9
4.2
V
-
-
±1
μA
-
-
3
μA
-
-
2.5
mA
control pins; VI = 3 V or 0 V
-
4.5
-
pF
A port; VO = 3 V or 0 V; nOE = VCC
-
11.4
-
pF
B port; VO = 3 V or 0 V; nOE = VCC
-
3.8
-
pF
A port and B port
-
18.6
-
pF
VI = 0 V; II = 64 mA
-
5
7
Ω
VI = 0 V; II = 30 mA
-
5
7
Ω
VI = 2.4 V; II = -15 mA
-
10
15
Ω
[2]
[3]
All typical values are measured at VCC = 5 V; Tamb = 25 °C.
This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND.
Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. The lowest voltage of the
two (A or B) terminals determines the ON resistance.
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
4 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
10. Dynamic characteristics
Table 7. Dynamic characteristics
Tamb = -40 °C to +85 °C; VCC = 4.5 V to 5.5 V; for test circuit, see Fig. 6.
Symbol
Parameter
Conditions
tpd
propagation delay
nA to nBn or nBn to nA; see Fig. 4
Sn to nA; see Fig. 4
ten
enable time
tdis
[1]
[2]
disable time
Min
Max
Unit
[1][2]
-
0.25
ns
[1][2]
1.2
6.2
ns
Sn to nBn; see Fig. 5
[2]
1.3
6.3
ns
nOE to nA or nBn; see Fig. 5
[2]
1.4
6.4
ns
Sn to nBn; see Fig. 5
[2]
1.1
7.2
ns
nOE to nA or nBn; see Fig. 5
[2]
1.0
7
ns
This parameter is warranted but not production tested. The propagation delay is based on the RC time constant of the typical ON
resistance of the switch and a load capacitance, when driven by an ideal voltage source (zero output impedance).
tPLH and tPHL are the same as tpd; tPZL and tPZH are the same as ten; tPLZ and tPHZ are the same as tdis.
10.1. Waveforms and test circuit
VI
input
VM
VM
0V
tPHL
tPLH
VOH
VM
output
VM
VOL
001aai367
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 4.
The input (nA, nBn) to output (nBn, nA) or input (Sn) to output (nA) propagation delay times
VI
VM
nOE, Sn input
VM
GND
tPZL
tPLZ
output
LOW-to-OFF
OFF-to-LOW
VCC
VM
VX
VOL
tPZH
tPHZ
VOH
output
HIGH-to-OFF
OFF-to-HIGH
VY
VM
GND
switch
enabled
switch
disabled
switch
enabled
001aal212
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig. 5.
Enable and disable times
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
5 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
Table 8. Measurement points
Supply voltage
Input
Output
VCC
VI
VM
VM
VX
VY
4.5 V to 5.5 V
GND to 3.0 V
1.5 V
1.5 V
VOL + 0.3 V
VOH - 0.3 V
tW
VI
90 %
negative
pulse
VM
VM
10 %
0V
VI
tf
tr
tr
tf
90 %
positive
pulse
VM
VM
10 %
0V
tW
VEXT
VCC
G
VI
RL
VO
DUT
RT
CL
RL
001aae331
Test data is given in Table 9.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig. 6.
Test circuit for measuring switching times
Table 9. Test data
Supply voltage
Input
VCC
VI
4.5 V to 5.5 V
GND to 3.0 V ≤ 2.5 ns
CBT3253
Product data sheet
Load
tr, tf
VEXT
CL
RL
tPLH, tPHL
tPLZ, tPZL
tPHZ, tPZH
50 pF
500 Ω
open
7.0 V
open
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
6 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
11. Package outline
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
D
E
A
X
c
y
HE
v M A
Z
16
9
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
1
L
8
e
w M
bp
0
2.5
detail X
5 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
mm
1.75
0.25
0.10
1.45
1.25
0.25
0.49
0.36
0.25
0.19
10.0
9.8
4.0
3.8
1.27
6.2
5.8
1.05
1.0
0.4
0.7
0.6
0.25
0.25
0.1
0.7
0.3
0.01
0.019 0.0100 0.39
0.014 0.0075 0.38
0.16
0.15
0.039
0.016
0.028
0.020
inches
0.010 0.057
0.069
0.004 0.049
0.05
0.244
0.041
0.228
0.01
0.01
0.028
0.004
0.012
θ
o
8
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
Fig. 7.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT109-1
076E07
MS-012
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Package outline SOT109-1 (SO16)
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
7 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
D
SOT338-1
E
A
X
c
y
HE
v M A
Z
9
16
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
L
8
1
detail X
w M
bp
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
2
0.21
0.05
1.80
1.65
0.25
0.38
0.25
0.20
0.09
6.4
6.0
5.4
5.2
0.65
7.9
7.6
1.25
1.03
0.63
0.9
0.7
0.2
0.13
0.1
1.00
0.55
8o
0o
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT338-1
Fig. 8.
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
MO-150
Package outline SOT338-1 (SSOP16)
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
8 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
D
SOT403-1
E
A
X
c
y
HE
v M A
Z
9
16
Q
A2
pin 1 index
(A 3 )
A1
A
θ
Lp
1
L
8
detail X
w M
bp
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
1.1
0.15
0.05
0.95
0.80
0.25
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
0.65
6.6
6.2
1
0.75
0.50
0.4
0.3
0.2
0.13
0.1
0.40
0.06
8o
0o
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT403-1
Fig. 9.
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-18
MO-153
Package outline SOT403-1 (TSSOP16)
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
9 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
12. Abbreviations
Table 10. Abbreviations
Acronym
Description
CDM
Charged Device Model
ESD
ElectroStatic Discharge
HBM
Human Body Model
MM
Machine Model
TTL
Transistor-Transistor Logic
13. Revision history
Table 11. Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
CBT3253 v.3
20181122
Product data sheet
-
CBT3253 v.2
Modifications:
•
•
•
The format of this data sheet has been redesigned to comply with the identity guidelines of
Nexperia.
Legal texts have been adapted to the new company name where appropriate.
Type number CBT3253DS (SOT519-1/SSOP16) removed.
CBT3253 v.2
20141203
Modifications:
•
•
•
•
•
•
CBT3253 v.1
CBT3253
Product data sheet
Product data sheet
-
CBT3253 v.1
The format of this data sheet has been redesigned to comply with the new identity guidelines of
NXP Semiconductors.
Legal texts have been adapted to the new company name where appropriate.
Section 1: text changed to align with the function of the device.
Fig. 1: schematic changed.
Table 3: switch description changed to align with the function of the device.
Table 6:
• Cio(off), A port: changed typical value from 23.5 pF to 11.4 pF
• Cio(off), B port: changed typical value from 6.5 pF to 3.8 pF
• added Cio(on) specification
• values for pass voltage modified.
20021104
Product data sheet
-
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
-
©
Nexperia B.V. 2018. All rights reserved
10 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
14. Legal information
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Data sheet status
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Document status
[1][2]
Product
status [3]
Definition
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
Preliminary [short]
data sheet
Qualification
This document contains data from
the preliminary specification.
Product [short]
data sheet
Production
This document contains the product
specification.
[1]
[2]
[3]
Please consult the most recently issued document before initiating or
completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the internet at https://www.nexperia.com.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
CBT3253
Product data sheet
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.nexperia.com/profile/terms, unless otherwise agreed
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
11 / 12
CBT3253
Nexperia
Dual 1-of-4 FET multiplexer/demultiplexer
Contents
1. General description...................................................... 1
2. Features and benefits.................................................. 1
3. Ordering information....................................................1
4. Functional diagram.......................................................2
5. Pinning information......................................................2
5.1. Pinning.........................................................................2
5.2. Pin description............................................................. 3
6. Functional description................................................. 3
7. Limiting values............................................................. 3
8. Recommended operating conditions..........................4
9. Static characteristics....................................................4
10. Dynamic characteristics............................................ 5
10.1. Waveforms and test circuit........................................ 5
11. Package outline.......................................................... 7
12. Abbreviations............................................................ 10
13. Revision history........................................................10
14. Legal information......................................................11
©
Nexperia B.V. 2018. All rights reserved
For more information, please visit: http://www.nexperia.com
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 22 November 2018
CBT3253
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 22 November 2018
©
Nexperia B.V. 2018. All rights reserved
12 / 12