SPECIFICATION
Supplier : Samsung electro-mechanics
Product : Multi-layer Ceramic Capacitor
(Reference sheet)
Samsung P/N :
CL01Y105MR5NLNC
Description :
CAP, 1㎌, 4V, ±20%, X7S, 0306
A. Samsung Part Number
CL
01
Y
105
M
R
5
N
L
N
C
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Samsung Multi-layer Ceramic Capacitor
0306 (inch code)
L: 0.8 ± 0.15
① Series
② Size
X7S
1㎌
±20 %
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
4V
0.5 +0.05/-0.1 mm
mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
1.6 ± 0.2 mm
W:
Ni
Cu
Sn 100%
LICC
Reserved for future use
Cardboard Type, 7" reel
B. Structure and Dimensions
L
T
BW
W
W
L
Samsung P/N
(Lead Free)
CL01Y105MR5NLNC
(Pb Free)
Dimension(㎜)
L
W
T
BW
0.8±0.15
1.6±0.2
0.5+0.05/-0.1
0.25±0.15
C. Samsung Reliability Test and Judgement condition
Performance
Test condition
1㎑±10%
Capacitance
Tan δ (DF)
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characteristics
Adhesive Strength
of Termination
Bending Strength
Solderability
Within specified tolerance
0.12 max.
10,000Mohm or 50Mohm·㎌
Whichever is smaller
No abnormal exterior appearance
No dielectric breakdown or
mechanical breakdown
X7S
0.5±0.1Vrms
*A capacitor prior to measuring the capacitance is heat
treated at 150℃+0/-10℃ for 1hour and maintained in
ambient air for 24±2 hours.
Rated Voltage
60~120 sec.
Microscope (10)
250% of the rated voltage
(From -55℃ to 125℃, Capacitance change should be within ±22%)
No peeling shall be occur on the
500gF, for 10±1 sec.
terminal electrode
Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Vibration Test
Moisture
Resistance
High Temperature
Resistance
Temperature
Cycling
Capacitance change :
within ±7.5%
Solder pot : 270±5℃, 10±1sec.
Tan δ, IR : initial spec.
Capacitance change :
Tan δ, IR : initial spec.
within ±10%
Amplitude : 1.5mm
From 10㎐ to 55㎐ (return : 1min.)
2hours 3 direction (x, y, z)
within ±12.5% With rated voltage
Capacitance change :
Tan δ :
0.2 max
IR :
500Mohm or 12.5Mohm ㎌
Whichever is smaller
Capacitance change : within ±12.5%
Tan δ :
0.2 max
IR :
1,000Mohm or 25Mohm ㎌
Whichever is smaller
Capacitance change : within ±12.5%
Tan δ, IR : initial spec.
40±2℃, 90~95%RH, 500+12/-0hrs
With 100% of the rated voltage
Max. operating temperature
1000+48/-0hrs
1 cycle condition
Min. operating temperature
→
→ Max. operating temperature →
5 cycle test
※ The reliability test condition can be replaced by the corresponding accelerated test condition.
D. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
Product specifications included in the specifications are effective as of March 1, 2013.
Please be advised that they are standard product specifications for reference only.
We may change, modify or discontinue the product specifications without notice at any time.
So, you need to approve the product specifications before placing an order.
Should you have any question regarding the product specifications,
please contact our sales personnel or application engineers.
25℃
25℃
- Caution of Application -
Disclaimer
The products listed as follows are NOT designed and manufactured for any use and applications set
forth below.
Please note that any misuse of the products deviating from products specifications or information
provided in this Spec sheet may cause serious property damages or personal injury.
① Aerospace/Aviation equipment
② Automotive of Transportation equipment (vehicles,trains,ships,etc)
③ Military equipment
④ Atomic energy-related equipment
⑤ Undersea equipment
⑥ Any other applications with the same as or similar complexity or reliability to the applications
Limitation
Please contact us with usage environment information such as voltage, current, temperature, or
other special conditions before using our products for the applications listed below. The below
application conditions require especially high reliability products to prevent defects that may directly
cause damages or loss to third party's life, body or property.
If you have any questions regarding this 'Limitation',you should first contact our sales
personnel or application engineers.
① Medical equipment
② Disaster prevention/crime prevention equipment
③ Power plant control equipment
④ Traffic signal equipment
⑤ Data-processing equipment
⑥ Electric heating apparatus,burning equipment
⑦ Safety equipment
⑧ Any other applications with the same as or similar complexity or reliability to the applications
很抱歉,暂时无法提供与“CL01Y105MR5NLNC”相匹配的价格&库存,您可以联系我们找货
免费人工找货