CL21B102KB6SFNC

SPECIFICATION  Supplier : Samsung electro-mechanics  Samsung P/N : CL21B102KB6SFNC  Product : Multi-layer Ceramic Capacitor  Description : CAP, 1㎋, 50V, ±10%, X7R, 0805 A. Samsung Part Number ① Series CL 21 B 102 K B 6 S F N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor ② Size 0805 (inch code) ③ Dielectric X7R ④ Capacitance ⑤ Capacitance L: 2.0 ± 0.1 ⑦ Thickness 0.6 ± 0.1 mm mm Ni Cu/Ag-Epoxy Termination tolerance 50 V 1.25 ± 0.1 W: ⑧ Inner electrode 1㎋ ±10 % ⑥ Rated Voltage mm Sn 100% Plating ⑨ Product (Pb Free) Product for POWER application ⑩ Special Reserved for future use ⑪ Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance 1.0±0.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characterisitcs Adhesive Strength (From -55℃ to 125℃, Capacitance change shoud be within ±15%) No peeling shall be occur on the 500gF, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan δ (DF) Insulation Within specified tolerance Test condition 1㎑±10% Capacitance 0.025 max. within ±12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan δ, IR : initial spec. within ±7.5% Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : within ±5% Tan δ, IR : initial spec. Moisture Capacitance change : Resistance Tan δ : IR : Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours  3 direction (x, y, z) within ±12.5% With rated voltage 0.05 max 40±2℃, 90~95%RH, 500+12/-0hrs 500Mohm or 25Mohm  ㎌ Whichever is Smaller High Temperature Capacitance change : Resistance Tan δ : IR : Test condition within ±12.5% With 200% 0.05 max Max. operating temperature 1000Mohm or 50Mohm  ㎌ Whichever is Smaller Temperature Capacitance change : Cycling Tan δ, IR : initial spec. of the rated voltage within ±7.5% 1000+48/-0hrs 1 cycle condition Min. operating temperature 25℃ → 25℃ → Max. operating temperature → 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.