CL21C221FBANNNC

SPECIFICATION • Samsung P/N : CL21C221FBANNNC CAP, 220㎊ ㎊, 50V, ±1%, C0G, 0805 • Description : • Supplier : Samsung electro-mechanics • Product : Multi-layer Ceramic Capacitor A. Samsung Part Number ① Series ② Size ③ Dielectric ④ Capacitance CL 21 C 221 F B A N N N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 0805 (inch code) L: 2.0 ± 0.1 220 ㎊ ±1 % ⑥ Rated Voltage ⑦ Thickness 1.25 ± 0.1 W: ⑧ Inner electrode Termination C0G ⑤ Capacitance tolerance mm Ni Cu Sn 100% Plating 50 V 0.65 ± 0.1 mm mm (Pb Free) ⑨ Product ⑩ Special Reserved for future use ⑪ Packaging Cardboard Type, 7" reel Normal B. Samsung Reliablility Test and Judgement condition Performance 0.5~5Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm⋅㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (×10) 300% of the rated voltage Voltage mechanical breakdown Temperature C0G Characterisitcs Adhesive Strength (From -55℃ to 125℃, Capacitance change shoud be within ±30PPM/℃) No peeling shall be occur on the 500g⋅F, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. Solderability within ±5% or ±0.5㎊ whichever is larger More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. Q Insulation Within specified tolerance Test condition 1㎒±10% Capacitance 1000 min (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. Solder pot : 270±5℃, 10±1sec. Performance Test condition Vibration Test Capacitance change : Moisture within ±2.5% or ±0.25㎊ whichever is larger From 10㎐ to 55㎐ (return : 1min.) Tan δ, IR : initial spec. 2hours × 3 direction (x, y, z) Capacitance change : With rated voltage Resistance Amplitude : 1.5mm within ±7.5% or ±0.75㎊ whichever is larger 40±2℃, 90~95%RH, 500+12/-0hrs Q: 200 min IR : 500Mohm or 25Mohm ⋅ ㎌ Whichever is Smaller High Temperature Capacitance change : With 200% Resistance within ±3% or ±0.3㎊ whichever is larger Q: 350 min Max. operating temperature IR : of the rated voltage 1000+48/-0hrs 1000Mohm or 50Mohm ⋅ ㎌ Whichever is Smaller Temperature Capacitance change : 1 cycle condition Cycling 25℃ within ±2.5% or ±0.25㎊ whichever is larger Min. operating temperature→ Tan δ, IR : initial spec. → Max. operating temperature → 25℃ 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.