CL31A475MAHNNNE

SPECIFICATION  Supplier : Samsung electro-mechanics  Samsung P/N : CL31A475MAHNNNE  Product : Multi-layer Ceramic Capacitor  Descriptiont : CAP, 4.7㎌, 25V, ±20%, X5R, 1206 A. Samsung Part Number ① Series CL 31 A 475 M A H N N N E ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor ② Size 1206 (inch code) ③ Dielectric X5R ④ Capacitance ⑤ Capacitance L: 3.2 ± 0.2 ⑥ Rated Voltage 25 V ⑦ Thickness 1.6 ± 0.2 mm 1.6 W: ± 0.2 ⑧ Inner electrode Ni Termination Cu Plating Sn 100% 4.7 ㎌ ±20 % tolerance mm mm (Pb Free) ⑨ Product Normal ⑩ Special Reserved for future use ⑪ Packaging Embossed Type, 7" reel B. Samsung Reliability Test and Judgement condition Performance 1.0±0.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characteristics Adhesive Strength (From -55℃ to 85℃, Capacitance change should be within ±15%) No peeling shall be occur on the 500gF, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan δ (DF) Insulation Within specified tolerance Test condition 1㎑±10% Capacitance 0.075 max. within ±12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan δ, IR : initial spec. within ±7.5% Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : within ±5% Tan δ, IR : initial spec. Moisture Capacitance change : Resistance Tan δ : IR : Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours  3 direction (x, y, z) within ±12.5% With rated voltage 0.125 max 40±2℃, 90~95%RH, 500+12/-0hrs 12.5㏁·㎌ or Over High Temperature Capacitance change : Resistance Tan δ : IR : Test condition within ±12.5% With 150% 0.125 max of the rated voltage Max. operating temperature 25㏁·㎌ or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan δ, IR : initial spec. within ±7.5% 1 cycle condition Min. operating temperature 25℃ → 25℃ → Max. operating temperature → 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.