CL31C471JGFNNNE

SPECIFICATION • Samsung P/N : CL31C471JGFNNNE CAP, 470㎊ ㎊, 500V, ±5%, C0G, 1206 • Description : • Supplier : Samsung electro-mechanics • Product : Multi-layer Ceramic Capacitor A. Samsung Part Number ① Series ② Size ③ Dielectric ④ Capacitance CL 31 C 471 J G F N N N E ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 470 ㎊ ±5 % ⑥ Rated Voltage ⑦ Thickness mm 1.6 W: ⑧ Inner electrode Termination C0G ⑤ Capacitance tolerance ± 0.15 Ni Cu Sn 100% Plating 500 V 1.25 ± 0.15 mm ± 0.15 mm (Pb Free) ⑨ Product ⑩ Special Reserved for future use ⑪ Packaging Embossed Type, 7" reel Normal B. Samsung Reliablility Test and Judgement condition Performance 0.5~5Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm⋅㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (×10) 150% of the rated voltage Voltage mechanical breakdown Temperature C0G Characterisitcs Adhesive Strength (From -55℃ to 125℃, Capacitance change shoud be within ±30PPM/℃) No peeling shall be occur on the 500g⋅F, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. Solderability within ±5% or ±0.5㎊ whichever is larger More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. Q Insulation Within specified tolerance Test condition 1㎒±10% Capacitance 1000 min (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Test condition Capacitance change : Amplitude : 1.5mm within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.) Moisture Capacitance change : Resistance within ±7.5% or ±0.75㎊ whichever is larger Q: 200 min IR : 2hours × 3 direction (x, y, z) With rated voltage 40±2℃, 90~95%RH, 500+12/-0hrs 500Mohm or 25Mohm ⋅ ㎌ Whichever is Smaller High Temperature Capacitance change : With 150% Resistance within ±3% or ±0.3㎊ whichever is larger Q: 350 min Max. operating temperature IR : of the rated voltage 1000+48/-0hrs 1000Mohm or 50Mohm ⋅ ㎌ Whichever is Smaller Temperature Capacitance change : 1 cycle condition Cycling within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. Min. operating temperature→ → 25℃ Max. operating temperature → 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25℃