CL31C680KBCNBND

SPECIFICATION  Supplier : Samsung electro-mechanics  Product : Multi-layer Ceramic Capacitor  Samsung P/N : CL31C680KBCNBND CAP, 68㎊, 50V, ±10%, C0G, 1206  Description : A. Samsung Part Number ① Series ② Size ③ Dielectric ④ Capacitance ⑤ Capacitance tolerance ⑥ Rated Voltage ⑦ Thickness CL 31 C 680 K B C N B N D ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 ± 0.15 C0G 68 ㎊ ±10 % 50 V 0.85 ± 0.15 mm mm ⑧ Inner electrode Termination Plating ⑨ Product ⑩ Special ⑪ Packaging W: 1.6 ± 0.15 mm Ni Cu Sn 100% (Pb Free) Array(4-element) Reserved for future use Cardboard Type,13"reel(10,000ea) B. Samsung Reliability Test and Judgement condition Performance Capacitance Q Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Test condition Within specified tolerance 1000 min 1㎒±10% 0.5~5Vrms More than 500Mohm㎌ Rated Voltage 60~120 sec. No abnormal exterior appearance No dielectric breakdown or mechanical breakdown C0G Visual inspection 300% of the rated voltage (From -55℃ to 125℃, Capacitance change should be within ±30PPM/℃) No peeling shall be occur on the 500gF, for 10±1 sec. terminal electrode Capacitance change : within ±5% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Soldering heat Capacitance change : within ±2.5% Tan δ, IR : initial spec. Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : within ±2.5% Tan δ, IR : initial spec. Test condition Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours  3 direction (x, y, z) With rated voltage Moisture Resistance Capacitance change : within ±7.5% Q: 200 min IR : More than 25㏁·㎌ High Temperature Resistance Capacitance change : within ±3% Q: 350 min IR : More than 50㏁·㎌ With 200% of the rated voltage Max. operating temperature 1000+48/-0 hour Temperature Cycling Capacitance change : within ±2.5% Tan δ, IR : initial spec. 1 cycle condition Min. operating temperature → → Max. operating temperature → 40±2℃, 90~95%RH, 500 +12/-0 hour 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25℃ 25℃