RC6432F333CS

Mar 2022 TV ile b o M r pute Com CHIP RESISTORS ory Mem CHIP RESISTORS C O N T E N T S We, Samsung, declare that our component Chip Resistor is produced in accordance with EU RoHS directive. 1. RoHS Compliance and restriction of Br The following restricted materials are not used in packaging materials as well as products in compliance with the law and restriction. - Cd, Pb, Hg, Cr6+, As, Br and the compounds, PCB, asbestos - Bromic materials : PBBs, PBBOs, PBDO, PBDE, PBB - Phthalate materials : DEHP, BBP, DBP, DIBP 2. No use of materials breaking Ozone layer The following ODS materials are not used in our fabrication process. - ODS material : Freon, Haron, 1-1-1 TCE, CCl4, HCFC 04 Product Characteristic data Notes 10 General_Standard Standard(RC), Reverse(RCB) 14 Array Type Resistor Flat Type(RF, RM), Concave Type(RN, RM, RK), Convex Type(RP) 20 General_Current Sensing Resistor(CSR) Low ohms(RUT), Ultra Low ohms(RU, RUK), Wide Terminal(RJ) If you want more information, please visit the website of Samsung Electro-mechanics [http://www.sem.samsung.com, http://www.semlcr.com] 28 Metal_Current Sensing Resistor(M_CSR) Metal Plate_Clad Type(RLP, RLC) 30 High Power Chip Resistor General Standard(RCW) 32 High Voltage Chip Resistor (RCV) 34 Anti-Sulfur Resistor General Standard(RCS), Flat Type(RFS), Convex Type(RPS) 36 Lead free Chip Resistor General Standard, Array Type, Anti-Sulfur Type 38 Center Common Array Resistor(CCA) 3-Terminal Array Type(RFT) 40 Characteristics Performance 44 Packaging 46 Standard Resistance Value 47 Caution/Notice Electrical & Mechanical Caution, Process of Mounting, Soldering, Designing and Others. 66 Component sales offices/manufacturing sites CHIP RESISTORS CHIP RESISTORS Product Characteristic data Notes Please be advised that this is a standard product specification for a reference only. Product Characteristic data Notes Max Working Voltage (Max Rated Voltage)   It refers to max DC or AC (rms) voltage that can be applied to a resistor constantly. As this given voltage is set by size, the rated voltage of a resistor must not exceed max working voltage. Measurement of Resistance Value   Apply DC voltage specified in the product specifications and measure R-value at room temperature.    Voltage that can be applied is limited by size and is referred to as max working voltage.     ‌As the voltage applied is different for the different resistance range, the voltage corresponding to the resistance   If Rated Voltage > Max Working Voltage, max working voltage must be used as rated voltage.   Array Type Resistor Concave(RN, RM, RK) If Rated Voltage < Max Working Voltage, the rated voltage shall be used. automatically, the standard measuring instrument must be used. Array Type Resistor Convex(RP)   ‌For a reduction of an electrical noise, it is recommended to use 4-terminal measuring instrument in order to minimize linear resistance.  Ex) For RC1608 Series [P = 0.1(W), Max working voltage = 50(V)]   When measuring the chip on PCB, the PCB must be same as reference, to reduce the differences depending on 1) The rated voltage, when R = 1KΩ PCB (Fig. 3).  Rated Voltage Current Sensing Resistor Low ohms(RUT) 2) The rated voltage, when R= 100KΩ E= 0.1×1000 = 10V   Standard voltage value for each resistance range is according to the JIS standard. (JIS C 5201-1 (4.5)) E= 0.1×100000 = 100V Current Sensing Resistor Ultra Low ohms(RU, RUK) Value is lower than Max working voltage, Value is higher than Max working voltage, therefore E = 10(V) therefore E = 50(V) Current Sensing Resistor Wide Terminal(RJ)   The rated voltage in resistance is the DC continuous working voltage corresponding to rated power or AC (rms) Metal_CSR Metal Plate_Clad(RLP,RLC) voltage in the commercial line frequency waveform. It is calculated with the following formula. If the value calculated with the formula exceeds Max working voltage, rated voltage is limited to max working voltage. That is, after calculating E value with the formula, the lower value is the rated voltage between the E value calculated Max Working Voltage with the formula and max working voltage. (Unit: V) Dim Item E= P×R Max Working E: Rated Voltage (V) P: Rated Power (W) 0402 (01005) 0603 (0201) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) 5025 (2010) 6432 (2512) 15 25 50 50 150 200 200 200 200 R : Nominal Resistance (Ω) Critical Resistance Value   It refers to max resistance value that rated current can be loaded without exceeding max working voltage. Rated   When the rated voltage is applied to the resistor, ambient temperature must be checked and load power must voltage is same with max working voltage in critical resistance value. be decreased according to the power derating curve.   Depending on R-value, rated voltage increases as A in Fig. 1 and max working voltage shall be applied when it is   If the voltage is higher than rated voltage, it is not guaranteed to have reliability and a performance of the higher than max working voltage. resistor. For inquiries about any other conditions, please contact a person in charge of sales.   The resistor value to apply max working voltage at the first is referred to as critical resistance value. In the   If a pulse waveform is applied to resistance, the max value of pulses must be within the rated voltage. General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Voltage that can be applied is limited by size, which is referred to as max working voltage. range must be applied. Since the voltage (current) is applied to most standard measuring instruments General_Standard Standard(RC) resistance range over the critical resistance value, max working voltage in Fig.1 shall be applied so that voltage can be constant, resulting in decreasing power. High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 04 05 CHIP RESISTORS CHIP RESISTORS Product Characteristic data Notes Product Characteristic data Notes Power Derating Curve Temperature Coefficient of Resistance : TCR   The rated power is the power of load power regulation that suits for continuous use at 70℃. If ambient   TCR (Temperature Coefficient of Resistance) represents the change rate (drift) of R-value per 1°C within the temperature is higher than 70℃, it decreases load power according to the rated power derating curve in Fig. 2.    In case that internal temperature does not use a resistor in designing circuit, its temperature is below 70℃, power guaranteed by our company shall be reflected 100% in design. However, if it exceeds 70℃, applied power must be reduced as temperature goes higher by referring to Fig. 2. range of working temperature based on 20°C temperature. And it is the characteristic to check a status of changes in R-value according to changes in temperature.    The measurement formula and the graph are as follows. T.C.R (ppm / °C) = ( temperature at 100℃, 0.07W that is 70% of rated power must be applied. 100 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 80 % Rated Power Operation area 60 RC0402 RC0603 6 R2 ‒ R1 1 )×( )×10 R1 t2 ‒ t1 [R-Value(Ω)] Fig. 2 (Power Derating Curve) R2 (R2-R1) R1 (t2-t1) -55 70 -20 0 20 40 60 80 100 120 t1 155 125 140 150 t2 [Temp(°C)] 160 Ambient Temperature(℃) Insulation resistance   Insulation R measures the resistance between an electrode and a ceramic body, and R-value must be over   1,000MΩ. During the measurement, DC voltage shall be applied for 1 minute and any mechanical damages must R-value Marking not be followed. Mark Existence. Size Mark. 0402 0603 1005 1608 2012 3216 3225 5025 6432 3Digit - - - ○ ○ ○ ○ ○ ○ 4Digit - - - - ○ ○ ○ ○ ○ Dielectric withstanding Voltage   Insulation R measures the resistance between an electrode and an insulation layer, and R-value must be over 1,000MΩ. During the measurement, DC voltage shall be applied for 1 minute and any mechanical damages must   R-value shall be marked with 3 or 4-digit numbers in accordance with the IEC standard, and decimal point shall be marked as “R”. not be followed. Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK)   The following criteria shall be applied.  2) Examples of Marking  (2012, Max 50mohm) Marking = “000”    RC2012J103CS (2012, ±5%, 10Kohm, E-24) Marking = 103    RC2012F1002CS (2012, ±1%, 10Kohm, E-24) Marking = 1002    RC2012F1402CS (2012, ±1%, 14Kohm, E-96) Marking = 1402    RC2012F1R0CS (2012, ±1%, 1ohm, E-96) Marking = 1R0 High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Standard Resistance Value 1) Products shall be marked on the top side and a jumper shall be marked as “000”.    RC2012J000CS High Power Resistor General(RCW) Packaging   Use 4-digit numbers for D- and F-grades and 3-digit numbers for J-grade based on the marking criteria. Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application   Exceptions are as follows.     1) D- and F-grades of over 1608 size shall be marked with 3-digit numbers same as E-24 Series if it can be marked.    2) Some vendors (companies), are allowed to mark other R-value different from ours. 06 Array Type Resistor Convex(RP) Metal_CSR Metal Plate_Clad(RLP,RLC) 20 -40 Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Wide Terminal(RJ) 40 0 -60 General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM)   It is based on R-value measured at 20℃, and TCR at this point is zero.  Ex) As for 1005, temperature is at 70℃ below, 100%(0.1W) of rated power can be applied but, when its General_Standard Standard(RC) 07 08 0402 Revers Array 0402 Array 0201 Array 2512 (6432) 2010 (5025) 1210 (3225) 1206 (3216) 0805 (2012) 0603 (1608) 0402 (1005) 0201 (0603) 01005 (0402) Size (inch)/(㎜) 0603 × 2R, 4R (Flat) 1005 × 2R, 4R (Convex) 1005 × 2R, 4R (Concave) 6432 × 1R 5025 × 1R 3225 × 1R 3216 × 1R 2012 × 1R 1608 × 1R 1005 × 1R 0603 × 1R 0402 × 1R Element (㎜ × n) 09   General CSR  Face Down RUT Series   Face Down RU Series  Wide Termination   Face Down RJ Series   Low T.C.R   Face Down RUK Series   Face up RL Series ㎜ 6432 1220 1632 2037 1608 2012 3216 6432 1005 1608 2012 3216 3225 5025 6432 1005 1608 2012 3216 3225 5025 6432 Standard Resistance Value 0402 0603 0805 1206 1210 2010 2512 0402 0603 0805 1206 1210 2010 2512 *0306 0816 0508 0612 0815 0603 0805 1206 2512 *0603 1608 *0508 1220 *0805 2012 *1206 3216 2512 *2512 6432 *3920 10050 inch Size Features Feature 1 1 10 0.33 100 100 100 100 0.5 0.33 0.25 0.125 10 0.125 100 10 0.25 0.67 10 0.33 100 10 0.5 100 10 0.67 1 10 0.75 0.75 10 2 0.5 1 2 5 1 1 5 10 1 10 1 10 0.5 1 1 0.5 1 1 0.5 0.5, 1 0.3 0.2 Min 8 1 25 25 12.5 200 200 200 500 200 200 400 200 150 350 200 50 200 150 50 100 75 25 15 Max Working Voltage 976 976 976 976 976 976 976 100 100 100 100 100 100 100 20 20 20 20 30 30 30 30 5 1 5 5 5 1 0.3 Max R-Value(mΩ) 2, 3 12.5 Watt (W) 1/16 1/16 1/32 1 2/3 1/3 1/4 1 1/4 1/8 1/2 1/8 1/10 1/4 1/10 1/16 1/5 1/16 1/20 1/10 1/20 1/32 Watt (W) ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 ± 1.0 ± 2.0 ± 5.0 Tolerance (%) RC RCW RCV RC RCW RCV RC RCW RCV RC 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 10㏁ 1㏁ 1㏁ 1㏁ 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 1Ω 10Ω 10Ω 10Ω Rated current [A] RC RCW RCV 10㏁ 10㏁ 10㏁ 1Ω 1Ω 1Ω RM RK RP RF RC RC RC RCW RCV 10㏁ 10㏁ 10㏁ 1Ω 1Ω 1Ω RPS RFS RCS RCWS RCVS RCS RCWS RCVS RCS RCWS RCVS RCS RCWS RCVS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 -55~155 100 150~500 150~500 150~600 150~600 150~500 100 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 100 100 100 100 100 150~500 ±1.0 ±1.0 150~500 ±1.0 200 200 ±1.0 100~200 ±1.0 100 ±1.0 ±1.0 100 ±1.0 100 100~250 ±1.0 ±1.0 Array Type Resistor Convex(RP) 100~500 -55~155 ● -65~170 ● ● -65~170 ● ● -55~170 -55~155 ● ● -65~175 -65~170 ● -65~175 Array Type Resistor Concave(RN, RM, RK) ±1.0 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AEC-Q200 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● RoHS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AEC -Q200 * Under development Operational Pb Temp. Free (℃) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● RoHS * Under development -55~155 100 ±1.0 150 75~150 ±1.0 75~100 ±1.0 75 ±1.0 ±1.0 100 100 ±1.0 ±1.0 T.C.R. ppm/℃ RM RCB RCB RCB Reverse TOL. (%) RH RH RH RH RH RH RCS RC 1㏁ 1Ω RCS RCWS RCVS Pb Free Anti-Sulfur General Max Head of P/N Min R Value 500A 400 300 200 100A 90 80 70 60 50 40 30 20 10A 9 8 7 6 5 4 3 2 1A 0.9 0.8 0.7 0.6 0.5 0.4 0.2 0.1  E  -Beam Welded RLE Series Type Current Sensing Resistors Array Discrete Type Overall Resistors CHIP RESISTORS CHIP RESISTORS Product Characteristic data Notes Product Characteristic data Notes General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS General_Standard Product Characteristic data Notes Features Application   ‌Very small, thin, and light, weight.   ‌General purpose.   ‌Home Appliances.  (DVD, Digital TV,  Digital Camera,  Audio, Tunner).   ‌Both flow and reflow soldering   are applicable.   ‌Very low inductance.   ‌Lead-free teminal.   ‌EU RoHS Compliant.   ‌AEC-Q200 Compliant. Rated Power (W) RC0402 01005 1/32 RC0603 0201 1/20 RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 1/16 1/10 1/8 1/4 1/3 2/3 1 P : Rated Power(W) R : Resistance(Ω) Type Size (inch) For ambient temperature above 70℃, the loading RC0402 01005 power follows the below power derating curve. RC0603 0201 RC1005 0402 RC1608 0603 RC2012 0805 RC3216 1206 RC3225 1210 RC5025 2010 RC6432 2512 loading power at 70℃ ambient temperature.  T B L 100 〈 Side View 〉 〈 Bottom View 〉 (Unit: mm) Type Size(inch) L W T A B RC0402 01005 0.40 ± 0.02 0.20 ± 0.02 0.13 ± 0.02 0.10 ± 0.03 0.10 ± 0.03 0201 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.10 ± 0.05 0.15 ± 0.05 RC1005 0402 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 RC1608 0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.35 ± 0.10 RC2012 0805 2.00 ± 0.20 1.25 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.35 ± 0.20 RC3216 1206 3.20 ± 0.20 1.60 ± 0.15 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 RC3225 1210 3.20 ± 0.20 2.55 ± 0.20 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 RC5025 2010 5.00 ± 0.20 2.50 ± 0.20 0.55 ± 0.10 0.60 ± 0.20 0.60 ± 0.20 RC6432 2512 6.30 ± 0.20 3.20 ± 0.20 0.55 ± 0.10 0.60 ± 0.20 0.60 ± 0.20 *0402(inch) and smaller size don’t have marking on top the chips. *0603(inch) 4-digit models(E-96 series) don’t have marking on top of the chips. Parts Numbering System   The part number system shall be in the following format RC 2012 J 100 CS Code Designation Dimension & Size Code Tolerance Resistance Value Packaging Code 0402 : 0.4×0.2(㎜)-01005(inch) 0603 : 0.6×0.3(㎜)-0201(inch) 1005 : 1.0×0.5(㎜)-0402(inch) 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 3225 : 3.2×2.5(㎜)-1210(inch) 5025 : 5.0×2.5(㎜)-2010(inch) 6432 : 6.4×3.2(㎜)-2512(inch) D : ±0.5% F : ±1% G : ±2% J : ±5% *Jumper : J 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) % Rated Power 〈 Top View 〉 80 Operation area 60 RC0402 RC0603 40 20 -55 0 -60 -40 -20 70 0 125 155 Rated Current Resistance (A) (Ω) 0.5 0.05 Max 2.0 Marking 3 digits indication (E-24 series) - ‌Left 2 digits represent significant figures. - ‌Last 1 digit represents exponential number of 10. - ‌Example:103 Left 2 digits: 10 Left 1 digit: 3 103 = 10×103Ω = 10000Ω=10㏀ No marking types : RC0402, RC0603, RC1005 *Jumper : ‘000’ 4 digits indication (E-96 series) - ‌Left 3 digits represent significant figures. - ‌Last 1 digit represents exponential number of 10. - ‌Example:1002 Left 2 digits: 100 Left 1 digit: 2 1002 = 100×102Ω = 10000Ω=10㏀ 1002 No marking types : RC0402, RC0603, RC1005, RC1608 E-24 10 11 12 13 15 16 11 Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) E-96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 E-24 18 20 22 24 27 30 Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Voltage Chip Resistor (RCV) Lead free Chip Resistor General, Array, AntiSulfur E-96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 E-24 33 36 39 43 47 51 E-96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 963 976 E-24 56 Center Common Array 3-Terminal Array(RFT) Characteristics Performance 62 Packaging 68 Standard Resistance Value 75 Electrical & Mechanical Caution 82 91 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 10 Array Type Resistor Concave(RN, RM, RK) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) IEC Code System (E-96, E-24) E-96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 Array Type Resistor Flat(RF, RM) High Power Resistor General(RCW) 1.0 20 40 60 80 100 120 140 150 160 Ambient Temperature(℃) 103 CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” RC1005 RC1608 RC2012 RC3216 RC3225 RC5025 RC6432 General_Standard Reverse(RCB) Current Sensing Resistor Ultra Low ohms(RU, RUK) Jumper Rating   ‌The rated power is the maximum continuous W B RC : Chip Resistor P×R Max Rated Resistance Working Working Tolerance T.C.R Ambient Moisture Range Temp. Voltage (%) (ppm/℃) Temp. Level (Ω) (℃) (V) (℃) 1~99 ±300 ±1(F) 15 100~1M ±250 ±2(G) -55~125 1~9.9 ±300 25 ±5(J) 10~10M ±250 50 70 Level 1 50 ±0.5(D) 150 ±1(F) 1~9.9 ±300 -55~155 200 ±2(G) 10~10M ±100 200 ±5(J) 200 200 Power Derating Curve A A RC0603 0402 0603 0805 1206 1210 2010 2512 Rated Voltage (V)   ‌Please contact our sales representatives or engineers for other specifications Structure and Dimensions 103 Size (inch) Type   ‌For Computers & Communications.  (Notebook,Menory Module, Mobile, Network Equipment, etc).   ‌Suitable size and packaging   for surface mount assembly General_Standard Standard(RC) Specification Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Reverse General Product Characteristic data Notes Features General_Standard Standard(RC) Specification   ‌Resistor is on the bottom side (more stable for the outer impacts) Size (inch) Rated Power (W) Rated Voltage (V) RCB0603 0201 1/20 P×R RCB1005 0402 1/16   ‌Lead-free terminal Type   ‌Specially designed for Memory Modules   ‌EU RoHS Compliant.   ‌AEC-Q200 Compliant. P : Rated Power(W) R : Resistance(Ω) Max Rated Resistance Working Working Tolerance T.C.R Ambient Moisture Range Temp. Voltage (%) (ppm/℃) Temp. Level (Ω) (℃) (V) (℃) 1~9.9 ±300 25 -55~125 ±1(F) 10~10M ±250 70 Level 1 1~9.9 ±300 ±5(J) 50 -55~155 10~10M ±100   ‌Please contact our sales representatives or engineers for other specifications Application   ‌General purpose.   ‌Home Appliances.(DVD, Digital TV, Digital Camera, Audio, Tunner).   ‌For Computers & Communications.(Notebook, Menory Module, Mobile, Network Equipment, etc). Power Derating Curve Type Size (inch) For ambient tempetature above 70℃, the loading RCB0603 0201 0.5 power follows the below power derating curve. RCB1005 0402 1.0 loading power at 70℃ ambient temperature.  Structure and Dimensions Rated Current Resistance (A) (Ω) 0.05 Max % Rated Power 100 A W T A RCB1005 60 RCB0603 40 20 -55 0 -60 -40 -20 B L < Top > < Side > Marking 80 70 0 125 155 20 40 60 80 100 120 140 150 160 Ambient Temperature(℃) < Bottom > (Unit: mm) Type Size(inch) L W T A B RCB0603 0201 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.15 ± 0.05 0.15 ± 0.05 RCB1005 0402 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.25 ± 0.10 0.25 ± 0.10 Parts Numbering System E-96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174   The part number system shall be in the following format 0603 J 100 CS Code Designation Dimension & Size Code Tolerance Resistance Value Packaging Code RCB : Reverse 0603 : 0.6×0.3(㎜)-0201(inch) Chip 1005 : 1.0×0.5(㎜)-0402(inch) Resistor D : ±0.5% F : ±1% G : ±2% J : ±5% 3 or 4 digits coding system (IEC coding system) CS : Tape Packaging 7” 3digits (E-24 series) ES : Tape Packaging 10” 4digits (E-96 series) AS : Tape Packaging 13” *Jumper : J *Jumper : ‘000’ - ‌Left 2 digits represent significant figures. - ‌Last 1 digit represents exponential number of 10. - ‌Example:103 Left 2 digits: 10 Left 1 digit: 3 103 = 10×103Ω = 10000Ω=10㏀ 4 digits indication (E-96 series) - ‌Left 3 digits represent significant figures. - ‌Last 1 digit represents exponential number of 10. - ‌Example:1002 Left 2 digits: 100 Left 1 digit: 2 1002 = 100×102Ω = 10000Ω=10㏀ 103 E-24 10 11 12 13 15 16 E-96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 1002 No marking types : RCB0603, RCB1005 IEC Code System (E-96, E-24) RCB 3 digits indication (E-24 series) E-24 18 20 22 24 27 30 E-96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 E-24 33 36 39 43 47 51 No marking types : RCB0603, RCB1005 E-96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 963 976 E-24 56 13 Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance 62 Packaging 68 Standard Resistance Value 75 82 91 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 12 Array Type Resistor Flat(RF, RM) Array Type Resistor Convex(RP) Jumper Rating   ‌The rated power is the maximum continuous General_Standard Reverse(RCB) Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Arrays(Flat Type) Product Characteristic data Notes Features General_Standard Standard(RC) Parts Numbering System   ‌2 or 4 isolated resistors are in a body.   The part number system shall be in the following format   ‌Small size array   ‌Lead-free terminal RF 6 4P J 150 CS Code Designation Dimension Resistors Tolerance Resistance Value Packaging Code   ‌Specially designed for Memory Modules   ‌EU RoHS Compliant. RF : Flat RM : Inverted & Flat   AEC-Q200 Compliant. 2P : 2 Pieces 4P : 4 Pieces 06 : 0201 Array 3 digits coding system (IEC coding system) CS : Tape Packaging 7” E-24 series ES : Tape Packaging 10” AS : Tape Packaging 13” *Jumper : ‘000’ J : ±5% *Jumper : J   ‌For semiconductor devices. Specification   ‌For computers, digital circuits. Type Size (inch) Rated Power (W) Rated Voltage (V) 062P 0302 1/32 P×R Structure and Dimensions (1) Flat Type Array 064P B W 0502 1/32 P : Rated Power(W) R : Resistance(Ω) Max Resistance Working Working Tolerance T.C.R Range Temp. Voltage (%) (ppm/℃) (Ω) (℃) (V) T C1 C2 P 12.5 ±5(J) Size (inch) For ambient tempetature above 70℃, the loading 062P 302 power follows the below power derating curve. 064P 502 T -55~125 70 Level 1 T A (Unit: mm) B C1 C2 P - 0.50 ± 0.10 RF062P 0.80 ± 0.05 0.60 ± 0.05 0.23 ± 0.10 0.15 ± 0.10 0.20 ± 0.10 0.25 ± 0.10 RF064P 1.40 ± 0.05 0.60 ± 0.05 0.23 ± 0.10 0.15 ± 0.10 0.20 ± 0.10 0.25 ± 0.10 0.25 ± 0.10 0.40 ± 0.10 (2) Inverted Type Array A B 80 Rated Current Resistance (A) (Ω) 0.5 0.05 Max Operation area 40 20 0 -55 70 -40 0 40 125 80 120 Ambient Temperature(℃) C W D A A B B A A C C D C1 C2 P Type (inch) A Dimension B W L Type L W T T A C1 B Reflow Soldering A B 2A+B C D 062P 0.3 0.3 0.9 0.2 0.3 064P 0.3 0.3 0.9 0.2 0.2 C2 P - 0.50 ± 0.10 RM062P 0.80 ± 0.05 0.60 ± 0.05 0.23 ± 0.10 0.15 ± 0.10 0.20 ± 0.10 0.20 ± 0.10 RM064P 1.40 ± 0.05 0.60 ± 0.05 0.23 ± 0.10 0.15 ± 0.10 0.20 ± 0.10 0.20 ± 0.10 0.20 ± 0.10 0.40 ± 0.10 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 14 Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Center Common Array 3-Terminal Array(RFT) Characteristics Performance Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application (Unit: mm) C1 High Voltage Chip Resistor (RCV) Standard Resistance Value : Chip Resistor T Current Sensing Resistor Wide Terminal(RJ) Packaging C : Land Pattern L Current Sensing Resistor Ultra Low ohms(RU, RUK) Lead free Chip Resistor General, Array, AntiSulfur Land Pattern 60 Current Sensing Resistor Low ohms(RUT) High Power Resistor General(RCW) 100 C1 Percentage of the rated dissipation(%) L Array Type Resistor Concave(RN, RM, RK) Metal_CSR Metal Plate_Clad(RLP,RLC) Type loading power at 70℃ ambient temperature.  W ±200 Jumper Rating   ‌The rated power is the maximum continuous W L 10~1M 12.5 Power Derating Curve B A Type Rated Ambient Moisture Temp. Level (℃)   ‌Please contact our sales representatives or engineers for other specifications L Array Type Resistor Flat(RF, RM) Array Type Resistor Convex(RP) Application A General_Standard Reverse(RCB) 15 CHIP RESISTORS CHIP RESISTORS Arrays(Concave Type) Product Characteristic data Notes Features Application   ‌2 or 4 isolated resistors are in a body. General_Standard Standard(RC) Parts Numbering System   ‌For semiconductor devices.   The part number system shall be in the following format   ‌For computers, digital circuits.   Strong body RN 10 4P J 100 CS Code Designation Dimension Resistors Tolerance Resistance Value Packaging Code   ‌Lead-free terminal RN : Concave RM : Inverted Concave RK : Short-free & Inverted   ‌Specially designed for Memory Modules   ‌EU RoHS Compliant.   AEC-Q200 Compliant. 10 : 0402 Array 2P : 2 Pieces 4P : 4 Pieces 3 digits coding system (IEC coding system) CS : Tape Packaging 7” E-24 series ES : Tape Packaging 10” AS : Tape Packaging 13” *Jumper : ‘000’ F : ±1% J : ±5% *Jumper : J Type Size (inch) Rated Power (W) Rated Voltage (V) 102P 0404 1/16 P×R Structure and Dimensions (1) Concave Type B W 104P 0804 P : Rated Power(W) R : Resistance(Ω) 1/16 Max Resistance Working Working Tolerance T.C.R Range Temp. Voltage (%) (ppm/℃) (Ω) (℃) (V) 25 ±1(F) ±2(G) ±5(J) 25 1~9.9 10~1M ±300 ±200 Rated Ambient Moisture Temp. Level (℃) -55~155 70 Level 1 T 〈 Top View 〉 〈 Side View 〉 C1 C2 〈 Bottom View 〉 W T A B C1 C2 P - 0.50 ± 0.10 RN102P 1.00 ± 0.10 1.00 ± 0.10 0.35 ± 0.10 0.15 ± 0.10 0.25 ± 0.15 0.33 ± 0.10 RN104P 2.00 ± 0.10 1.00 ± 0.10 0.40 ± 0.10 0.15 ± 0.10 0.25 ± 0.15 0.30 ± 0.10 0.30 ± 0.10 0.50 ± 0.10 (2) Inverted Concave Type A 150 T 〈 Top View 〉 〈 Side View 〉 L W T Type Size (inch) For ambient tempetature above 70℃, the loading 102P 0404 power follows the below power derating curve. 104P 0804 loading power at 70℃ ambient temperature.  C1 C2 P 〈 Bottom View 〉 A Rated Current Resistance (A) (Ω) 1.0 0.05 Max B C1 C2 P - 0.50 ± 0.10 RM102P 1.00 ± 0.10 1.00 ± 0.10 0.35 ± 0.10 0.15 ± 0.10 0.25 ± 0.15 0.33 ± 0.10 RM104P 2.00 ± 0.10 1.00 ± 0.10 0.45 ± 0.10 0.15 ± 0.10 0.25 ± 0.15 0.30 ± 0.10 0.30 ± 0.10 0.50 ± 0.10 80 Land Pattern 60 40 0 -30 0 30 60 155 D 90 120 150 Ambient Temperature(℃) A B Standard Resistance Value : Chip Resistor B 150 W L T C1 〈 Top View 〉 〈 Side View 〉 C2 Type A 102P 104P B C D E P 0.3 - 0.2 0.5 0.4 0.5 0.3 0.3 0.2 0.5 0.4 0.5 L W T A 〈 Bottom View 〉 B C1 C2 P - 0.50 ± 0.10 RK102P 1.00 ± 0.10 1.00 ± 0.10 0.35 ± 0.10 - 0.25 ± 0.15 0.33 ± 0.10 RK104P 2.00 ± 0.10 1.00 ± 0.10 0.45 ± 0.10 - 0.25 ± 0.15 0.30 ± 0.10 0.30 ± 0.10 0.50 ± 0.10 16 Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application P (Unit: mm) Type Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Packaging C : Land Pattern (3) Short-free & Inverted Concave Type High Voltage Chip Resistor (RCV) Characteristics Performance E 20 70 Current Sensing Resistor Wide Terminal(RJ) Center Common Array 3-Terminal Array(RFT) P Operation area -55 Current Sensing Resistor Ultra Low ohms(RU, RUK) Lead free Chip Resistor General, Array, AntiSulfur 100 W L Jumper Rating   ‌The rated power is the maximum continuous B (Unit: mm) Type Power Derating Curve Percentage of the rated dissipation(%) L Current Sensing Resistor Low ohms(RUT) High Power Resistor General(RCW) P (Unit: mm) Type Array Type Resistor Concave(RN, RM, RK) Metal_CSR Metal Plate_Clad(RLP,RLC)   ‌Please contact our sales representatives or engineers for other specifications L Array Type Resistor Flat(RF, RM) Array Type Resistor Convex(RP) Specification A General_Standard Reverse(RCB) The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 17 CHIP RESISTORS CHIP RESISTORS Arrays(Convex Type) Product Characteristic data Notes Features General_Standard Standard(RC) Specification   General type resistor array Size (inch) Rated Power (W) Rated Voltage (V) RP102P 0404 1/16 P×R RP104P 0804 1/16   2 or 4 isolated resistors are in a body. Type   ‌Lead-free terminal   ‌EU RoHS Compliant.   ‌AEC-Q200 Compliant. Application P : Rated Power(W) R : Resistance(Ω) Max Resistance Working Working Tolerance T.C.R Range Temp. Voltage (%) (ppm/℃) (Ω) (℃) (V) 25 ±300 1~9.9 10~1M ±5(J) 25 Rated Ambient Moisture Temp. Level (℃) -55~155 70 Level 1 Array Type Resistor Convex(RP)   ‌For semiconductor devices. Power Derating Curve Jumper Rating   ‌The rated power is the maximum continuous Type Size (inch) For ambient tempetature above 70℃, the loading RP102P 0404 power follows the below power derating curve. RP104P 0804 loading power at 70℃ ambient temperature.  Structure and Dimensions Rated Current Resistance (A) (Ω) 1.0 0.05 Max A B A 150 W C1 C1 T B W C2 T Percentage of the rated dissipation(%)   ‌4 Array 80 Operation area 40 High Power Resistor General(RCW) 20 -55 -30 70 0 30 L L 60 155 90 120 150 Ambient Temperature(℃) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Land Pattern P2 P Type P L W T A B C2 - E P RP102P 1.00 ± 0.10 1.00 ± 0.10 0.35 ± 0.10 0.20 ± 0.10 0.25 ± 0.10 0.33 ± 0.10 RP104P 2.00 ± 0.10 1.00 ± 0.10 0.35 ± 0.10 0.20 ± 0.10 0.25 ± 0.10 0.40 ± 0.10 0.30 ± 0.10 0.50 ± 0.10 : Land Pattern 0.65 ± 0.10 : Chip Resistor Parts Numbering System   The part number system shall be in the following format RP 10 4P J 100 CS Code Designation Dimension Resistors Tolerance Resistance Value Packaging Code 10 : 0402 Array 16 : 0603 Array 2P : 2 Pieces 4P : 4 Pieces J : ±5% *Jumper : J 3 digits coding system (IEC coding system) E-24 series Type A RP102P RP104P Center Common Array 3-Terminal Array(RFT) D A RP : Convex Lead free Chip Resistor General, Array, AntiSulfur P1 (Unit: mm) C1 Characteristics Performance C B B C D E P1 0.4 - 0.25 0.5 0.5 0.65 0.5 0.3 0.2 0.5 0.5 0.55 P2 0.5 Packaging Standard Resistance Value Electrical & Mechanical Caution CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” Process of Mounting Soldering, Design *Jumper : ‘000’ Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 18 Current Sensing Resistor Ultra Low ohms(RU, RUK) Metal_CSR Metal Plate_Clad(RLP,RLC) 60 0 Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Wide Terminal(RJ) 100   ‌2 Array Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) ±200   ‌Please contact our sales representatives or engineers for other specifications   ‌For computers, digital circuits. General_Standard Reverse(RCB) 19 CHIP RESISTORS CHIP RESISTORS Low Ohms(RUT Series) Product Characteristic data Notes Features General_Standard Standard(RC) Specification   Mid range thick film type low ohm resistors Type Size (inch) Rated Power (W) RUT1005 0402 1/8 RUT1608 0603 1/4   EU RoHS Compliant. RUT2012 0805 1/3   AEC-Q200 Compliant. RUT3216 1206 1/2 RUT3225 1210 2/3 RUT5025 2010 3/4 RUT6432 2512 1   Resistance range in 0.1~1Ω   ‌Resistor is on top surface   ‌Totally lead-free product Application   ‌Lighting modules Resistance (Ω) T.C.R (ppm/℃) Rated Current (A)    0.1~0.976 ±100 Rated Ambient Temperature (℃) Working Temperature (℃) Array Type Resistor Flat(RF, RM) P/R 70 P : Rated Power(W) R : Resistance(Ω) -55~155   ‌Please contact our sales representatives or engineers for other specifications Power Derating Curve   Mobile Phone, HDD, DSC, LCD Current Sensing Resistor Low ohms(RUT) Marking   ‌The rated power is the maximum continuous - ‌R means decimal point. - Other digits represent the significant value. - ‌Example: R100 R100= .100=0.100Ω =0.1Ω or 100mΩ For ambient tempetature above 70℃, the loading power follows the below power derating curve. R100 Percentage of the rated dissipation(%) 100 A W T B A B L 〈 Top View 〉 〈 Side View 〉 Current Sensing Resistor Ultra Low ohms(RU, RUK) 4 digits indication loading power at 70℃ ambient temperature.  Structure and Dimensions Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) 80 60 High Power Resistor General(RCW) R100 Operation area 40 High Voltage Chip Resistor (RCV) 20 0 -55 70 -30 〈 Bottom View 〉 0 30 60 155 90 120 150 Ambient Temperature(℃) (Unit: mm) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Type Size(inch) L W T A B RUT1005 0402 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 RUT1608 0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 0.35 ± 0.10 RUT2012 0805 2.00 ± 0.20 1.25 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.35 ± 0.20 Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) RUT3216 1206 3.20 ± 0.20 1.60 ± 0.15 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 R100 0.1 ±1, ±5 R154 0.154 ±1 R226 0.226 ±1 R330 0.33 ±1, ±5 R470 0.47 ±1, ±5 R680 0.68 ±1, ±5 RUT3225 1210 3.20 ± 0.20 2.55 ± 0.20 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 R102 0.102 ±1 R158 0.158 ±1 R232 0.232 ±1 R332 0.332 ±1 R475 0.475 ±1 R681 0.681 ±1 RUT5025 2010 5.00 ± 0.20 2.50 ± 0.20 0.55 ± 0.10 0.60 ± 0.20 0.60 ± 0.20 R105 0.105 ±1 R160 0.16 ±1, ±5 R237 0.237 ±1 R340 0.34 ±1 R487 0.487 ±1 R698 0.698 ±1 RUT6432 2512 6.30 ± 0.20 3.20 ± 0.20 0.55 ± 0.10 0.60 ± 0.20 0.60 ± 0.20 R107 0.107 ±1 R162 0.162 ±1 R240 0.24 ±1, ±5 R348 0.348 ±1 R499 0.499 ±1 R715 0.715 ±1 Parts Numbering System   The part number system shall be in the following format RUT 2012 J 100 CS Code Designation Dimension & Size Code Tolerance Resistance Value Packaging Code RUT : Current Sensing Resistor Top Mounting (Face-up) 1005 : 1.0×0.5(㎜)-0402(inch) 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 3225 : 3.2×2.5(㎜)-1210(inch) 5025 : 5.0×2.5(㎜)-2010(inch) 6432 : 6.4×3.2(㎜)-2512(inch) F : ±1% G : ±2% J : ±5% 4-digit coding system CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” Resistance Value Table R110 0.11 ±1, ±5 R165 0.165 ±1 R243 0.243 ±1 R357 0.357 ±1 R510 0.51 ±1, ±5 R732 0.732 ±1 R113 0.113 ±1 R169 0.169 ±1 R249 0.49 ±1 R360 0.36 ±1, ±5 R511 0.511 ±1 R750 0.75 ±1, ±5 R115 0.115 ±1 R174 0.174 ±1 R255 0.255 ±1 R365 0.365 ±1 R523 0.523 ±1 R768 0.768 ±1 R118 0.118 ±1 R178 0.178 ±1 R261 0.261 ±1 R374 0.374 ±1 R536 0.536 ±1 R787 0.787 ±1 R120 0.12 ±1, ±5 R180 0.18 ±1, ±5 R267 0.267 ±1 R383 0.383 ±1 R549 0.549 ±1 R806 0.806 ±1 ±1, ±5 R121 0.121 ±1 R182 0.182 ±1 R270 0.27 ±1, ±5 R390 0.39 ±1, ±5 R560 0.56 ±1, ±5 R820 0.82 R124 0.124 ±1 R187 0.187 ±1 R274 0.274 ±1 R392 0.392 ±1 R562 0.562 ±1 R825 0.825 ±1 R127 0.127 ±1 R191 0.191 ±1 R280 0.28 ±1 R402 0.402 ±1 R576 0.576 ±1 R845 0.845 ±1 ±1 R130 0.13 ±1, ±5 R196 0.196 R287 0.287 ±1 R412 0.412 ±1 R590 0.59 ±1 R866 0.866 ±1 R133 0.133 ±1 R200 0.200 ±1, ±5 R294 0.294 ±1 R422 0.422 ±1 R604 0.604 ±1 R887 0.887 ±1 R137 0.137 ±1 R205 0.205 R300 0.300 ±1, ±5 R430 0.43 ±1, ±5 R619 0.619 ±1 R909 0.909 ±1 ±1, ±5 ±1 R140 0.14 ±1 R210 0.21 ±1 R301 0.301 ±1 R432 0.432 ±1 R620 0.62 ±1, ±5 R910 0.91 R143 0.143 ±1 R215 0.215 ±1 R309 0.309 ±1 R442 0.442 ±1 R634 0.634 ±1 R931 0.931 ±1 R147 0.147 ±1 R220 0.22 ±1, ±5 R316 0.316 ±1 R453 0.453 ±1 R649 0.649 ±1 R953 0.953 ±1 R150 0.15 ±1, ±5 R221 0.221 ±1 R324 0.324 ±1 R464 0.464 ±1 R665 0.665 ±1 R976 0.976 ±1 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 20 21 Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP)   ‌PCM of Battery Pack   Power supplying part, DC power Charger, adapter. General_Standard Reverse(RCB) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Ultra Low Ohms(RU Series) Product Characteristic data Notes Features Application   Thick film type low ohm resistors   ‌Current Sensing.   Resistance range in 0.01~0.1Ω   Power supplying part, DC power charger, Adapter. Type Size (inch) Rated Power (W) Resistance (Ω) T.C.R (ppm/℃) RU1005 0402 1/8 0.02~0.1 R＜0.047 : ±500 R ≥ 0.047 : ±150 RU1608 0603 1/4 RU2012 0805 1/3   PCM of Battery Pack.   ‌Resistor is on bottom surface   ‌Totally lead-free product   Mobile Phone, Mobile PC,   Note PC, HDD, DSC, LCD   EU RoHS Compliant. General_Standard Standard(RC) Specification   AEC-Q200 Compliant. RU3216 1206 1/2 RU3225 1210 2/3 RU5025 2010 3/4 RU6432 2512 1 R＜0.025 : ±600 R＜0.033 : ±400    R ≥ 0.033 : ±150 0.01~0.1 R＜0.025 : ±500 R＜0.033 : ±350 R ≥ 0.033 : ±150 Working Temperature (℃) Power Derating Curve P/R 70 P : Rated Power(W) R : Resistance(Ω) -55-+155 Current Sensing Resistor Low ohms(RUT) - ‌R means decimal point. - Other digits represent the significant value. - No marking applied for the 0603(inch) and smaller sizes - ‌Example:R010 R010= .010=0.010Ω =0.01Ω or 10mΩ For ambient tempetature above 70℃, the loading T power follows the below power derating curve. B B 100 L 〈 Top View 〉 〈 Side View 〉 〈 Bottom View 〉 (Unit: mm) Percentage of the rated dissipation(%) A Current Sensing Resistor Ultra Low ohms(RU, RUK) 4-digits indication loading power at 70℃ ambient temperature.  80 60 Operation area R010 40 Size(inch) L W T A B RU1005 0402 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.25 ± 0.15 0.25 ± 0.15 RU1608 0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.30 ± 0.20 R≤0.05:0.50±0.20 R≥0.05:0.35±0.20 RU2012 0805 2.00 ± 0.20 1.25 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 R≤0.05:0.65±0.20 R≥0.05:0.40±0.20 RU3216 1206 3.20 ± 0.20 1.60 ± 0.15 0.60 ± 0.10 0.45 ± 0.20 R≤0.05:0.90±0.20 R≥0.05:0.60±0.20 0.60 ± 0.10 0.45 ± 0.20 Value (Ω) Tol (%) Value (Ω) Tol (%) Code 2.55 ± 0.20 Tol (%) Code 3.20 ± 0.20 Value (Ω) Code 1210 R≤0.05:1.70±0.20 R≥0.05:0.75±0.20 Code RU3225 Value (Ω) Tol (%) R010 0.010 ±1, ±5 R020 0.020 ±1, ±5 R039 0.039 ±1, ±5 R062 0.062 ±1, ±5 RU5025 2010 5.00 ± 0.20 2.50 ± 0.20 0.60 ± 0.10 0.50 ± 0.20 R≤0.05:1.50±0.20 R≥0.05:0.90±0.20 R011 0.011 ±1, ±5 R022 0.022 ±1, ±5 R040 0.040 ±1, ±5 R068 0.068 ±1, ±5 R012 0.012 ±1, ±5 R024 0.024 ±1, ±5 R043 0.430 ±1, ±5 R075 0.075 ±1, ±5 0.50 ± 0.20 R≤0.05:1.90±0.20 R≥0.05:1.10±0.25 R013 0.013 ±1, ±5 R027 0.027 ±1, ±5 R047 0.047 ±1, ±5 R082 0.082 ±1, ±5 R015 0.015 ±1, ±5 R030 0.030 ±1, ±5 R050 0.050 ±1, ±5 R091 0.091 ±1, ±5 R016 0.016 ±1, ±5 R033 0.033 ±1, ±5 R051 0.051 ±1, ±5 R100 0.100 ±1, ±5 R018 0.018 ±1, ±5 R036 0.036 ±1, ±5 R056 0.056 ±1, ±5 RU6432 2512 6.30 ± 0.20 3.20 ± 0.20 0.60 ± 0.10 Parts Numbering System Code Designation RU : Current Sensing Resistor 2012 Dimension & Size Code 1005 : 1.0×0.5(㎜)-0402(inch) 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 3225 : 3.2×2.5(㎜)-1210(inch) 5025 : 5.0×2.5(㎜)-2010(inch) 6432 : 6.4×3.2(㎜)-2512(inch) F Tolerance -30 70 0 30 60 155 R051 Resistance Value 4-digit coding system CS Type A B 2A+B C Packaging Code RU1005 0.8 0.5 2.1 0.5 RU1608 0.8 0.5 2.1 0.8 RU2012 0.9 0.8 2.6 1.2 RU3216 1.7 1.2 4.6 1.4 RU3225 1.7 1.2 4.6 2.4 RU5025 2.15 1.8 6.1 2.6 RU6432 2.3 3.0 7.6 3.3 CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” A B A : Land Pattern The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 22 23 Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value : Chip Resistor F : ±1% G : ±2% J : ±5% High Power Resistor General(RCW) Lead free Chip Resistor General, Array, AntiSulfur Resistance Value Table C Metal_CSR Metal Plate_Clad(RLP,RLC) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) 90 120 150 Ambient Temperature(℃) Land Pattern Standard   The part number system shall be in the following format RU 20 -55 Current Sensing Resistor Wide Terminal(RJ) High Voltage Chip Resistor (RCV) Type 0 Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Marking   ‌The rated power is the maximum continuous A W General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM)   ‌Please contact our sales representatives or engineers for other specifications Structure and Dimensions R010 Rated Ambient Temperature (℃) Rated Current (A) Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Ultra Low Ohms(RUK Series) Product Characteristic data Notes Features General_Standard Standard(RC) Specification   Thick film type low ohm resistors Type Size (inch) Rated Power (W) Resistance (Ω) T.C.R (ppm/℃) RUK1608 0603 1/2 0.010~0.030 ±100 0.007~0.009 ±250 0.010~0.030 ±100 0.010~0.030 ±100 0.007~0.009 ±500 0.010~0.030 ±100   Low TCR and High Power   Resistance range in 0.01~0.03Ω   Resistor is on bottom surface   Totally lead-free product RUK2012 0805 1/2   EU RoHS Compliant. RUK3216 1206 1   AEC-Q200 Compliant. RUK6432 2512 1 Rated Current (A)    Rated Ambient Temperature (℃) Working Temperature (℃) Array Type Resistor Flat(RF, RM) P/R 70 P : Rated Power(W) R : Resistance(Ω) -55-+155 Application Power Derating Curve   PCM of Battery Pack. 4-digits indication loading power at 70℃ ambient temperature.    Mobile Phone, Mobile PC, Note PC, HDD, DSC, LCD. For ambient tempetature above 70℃, the loading power follows the below power derating curve. Structure and Dimensions Percentage of the rated dissipation(%) R010 100 A W T B A 80 Operation area 20 0 -55 -30 70 0 30 60 Type Size(inch) L W T A B RUK1608 0603 1.60 ± 0.10 0.80 ± 0.10 R＜15m:0.55±0.10 R≥15m:0.45±0.10 0.35 ± 0.20 0.40 ± 0.20 1.25 ± 0.15 R＜15m:0.60±0.10 R≥15m:0.55±0.10 1.60 ± 0.15 R＜15m:0.65±0.10 R≥15m:0.60±0.10 0.45 ± 0.20 R＜15m:0.65±0.10 R≥15m:0.60±0.10 1.15 ± 0.20 RUK2012 RUK3216 RUK6432 0805 1206 2512 2.00 ± 0.20 3.20 ± 0.20 6.30 ± 0.20 3.20 ± 0.20 0.40 ± 0.20 0.90 ± 0.20 0.90 ± 0.20 Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) R010 0.010 ±1, ±5 R018 0.018 ±1, ±5 R011 0.011 ±1, ±5 R020 0.020 ±1, ±5 R012 0.012 ±1, ±5 R022 0.022 ±1, ±5 R013 0.013 ±1, ±5 R024 0.024 ±1, ±5 R015 0.015 ±1, ±5 R027 0.027 ±1, ±5 R016 0.016 ±1, ±5 R030 0.030 ±1, ±5 RUK 1608 F R010 CS Code Designation Dimension & Size Code Tolerance Resistance Value Packaging Code 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 6432 : 6.4×3.2(㎜)-2512(inch) Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Type A B 2A+B C : Land Pattern RUK1608 0.8 0.5 2.1 0.8 : Chip Resistor RUK2012 0.9 0.8 2.6 1.2 RUK3216 1.7 1.2 4.6 1.4 RUK6432 2.3 3.0 7.6 3.3   The part number system shall be in the following format RUK : Curren Sensing Resistor Low TCR Lead free Chip Resistor General, Array, AntiSulfur Land Pattern Standard Parts Numbering System F : ±1% G : ±2% J : ±5% 4-digit coding system C A CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” B A Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 24 Metal_CSR Metal Plate_Clad(RLP,RLC) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Resistance Value Table 0.55 ± 0.20 Current Sensing Resistor Wide Terminal(RJ) High Voltage Chip Resistor (RCV) 155 90 120 150 Ambient Temperature(℃) 〈 Bottom View 〉 (Unit: mm) Current Sensing Resistor Ultra Low ohms(RU, RUK) High Power Resistor General(RCW) R010 40 B 〈 Side View 〉 - ‌R means decimal point. - Other digits represent significant value. - No marking applied for the 0603(inch) and smaller sizes - ‌Example:R010 R010= .010=0.010Ω =0.01Ω or 10mΩ 60 L 〈 Top View 〉 Current Sensing Resistor Low ohms(RUT) Marking   ‌The rated power is the maximum continuous   Power supplying part, DC power charger, Adapter. Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP)   ‌Please contact our sales representatives or engineers for other specifications   ‌Current Sensing. General_Standard Reverse(RCB) 25 CHIP RESISTORS CHIP RESISTORS Wide Terminal(RJ Series) Product Characteristic data Notes Features General_Standard Standard(RC) Specification   ‌Thick film type wide terminal low ohm resistors Size (inch) Rated Power (W) *RJ0816 0306 1/2 0.005~0.02 ±200 RJ1220 0508 1 0.002~0.02 ±150   ‌Totally lead-free product RJ1632 0612 1 0.005~0.02 ±100   ‌EU RoHS Compliant. RJ2037 0815 1 0.005~0.02 ±100   ‌AEC-Q200 Compliant. *RJ3264 1225 2 0.005~0.02 ±100 Type   ‌High Power   ‌Resistance range in 0.002~0.02Ω   ‌Resistor is on bottom surface Resistance (Ω) T.C.R (ppm/℃) Rated Current (A)    Rated Ambient Temperature (℃) P/R Working Temperature (℃) 70 P : Rated Power(W) R : Resistance(Ω) -55~155 Array Type Resistor Convex(RP) Application Power Derating Curve   PCM of Battery Pack.   ‌The rated power is the maximum continuous 4-digits indication loading power at 70℃ ambient temperature.    Mobile Phone, Mobile PC, HDD, DSC, LCD. For ambient tempetature above 70℃, the loading - ‌R means decimal point. - Other digits represent significant value. - No marking applied for the 0508(inch) and smaller sizes - ‌Example:R010 R010= .010=0.010Ω =0.01Ω or 10mΩ power follows the below power derating curve. A A R010 B B L W Percentage of the rated dissipation(%) 100 Structure and Dimensions 80 60 Operation area 20 0 -55 -30 70 0 30 60 〈 Side View 〉 155 Resistance Value Table Size(inch) L W T A B *RJ0816 0306 0.80 ± 0.10 1.60 ± 0.10 0.45 ± 0.15 0.25 ± 0.15 0.30 ± 0.15 RJ1220 0508 1.25 ± 0.10 2.00 ± 0.10 0.55 ± 0.15 0.30 ± 0.15 0.35 ± 0.15 R005 0.005 ±1, ±5 R013 0.013 ±1, ±5 R030 0.030 ±1, ±5 RJ1632 0612 1.60 ± 0.15 3.20 ± 0.15 0.55 ± 0.15 0.35 ± 0.20 0.40 ± 0.20 R006 0.006 ±1, ±5 R015 0.015 ±1, ±5 R033 0.033 ±1, ±5 0.007 ±1, ±5 R016 0.016 ±1, ±5 R036 0.036 ±1, ±5 Value (Ω) Tol (%) Code Value (Ω) Tol (%) Code Value (Ω) Tol (%) RJ2037 0815 2.00 ± 0.15 3.75 ± 0.15 0.55 ± 0.15 0.45 ± 0.20 0.55 ± 0.20 R007 *RJ3264 1225 3.20 ± 0.20 6.40 ± 0.20 0.55 ± 0.15 0.60 ± 0.20 0.60 ± 0.20 R008 0.008 ±1, ±5 R018 0.018 ±1, ±5 R039 0.039 ±1, ±5 R009 0.009 ±1, ±5 R020 0.020 ±1, ±5 R040 0.040 ±1, ±5 * Under development Parts Numbering System R010 0.010 ±1, ±5 R022 0.022 ±1, ±5 R043 0.043 ±1, ±5 R011 0.011 ±1, ±5 R024 0.024 ±1, ±5 R047 0.047 ±1, ±5 R012 0.012 ±1, ±5 R027 0.027 ±1, ±5 R050 0.050 ±1, ±5 RJ 816 F R010 CS Dimension & Size Code Tolerance Resistance Value Packaging Code 4-digit coding system CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” 0816 : 0.8×1.6(mm) - 0306(inch) RJ : Thick Film 1220 : 1.2×2.0(mm) - 0508(inch) Wide Terminal 1632 : 1.6×3.2(mm) - 0612(inch) CSR 2037 : 2.0×3.7(mm) - 0815(inch) 3264 : 3.2×6.4(mm) - 1225(inch) F : ±1% G : ±2% J : ±5% Land Pattern Standard C : Land Pattern : Chip Resistor A B A Type A B 2A+B C *RJ0816 0.5 0.3 1.3 1.6 RJ1220 0.7 0.4 1.8 2.0 RJ1632 1.1 0.6 2.8 3.3 RJ2037 1.4 1.2 4.0 3.8 *RJ3264 2.0 1.6 5.6 6.5 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 26 27 Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value   The part number system shall be in the following format Code Designation Metal_CSR Metal Plate_Clad(RLP,RLC) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Type Code Current Sensing Resistor Wide Terminal(RJ) High Voltage Chip Resistor (RCV) 90 120 150 Ambient Temperature(℃) 〈 Bottom View 〉 (Unit: mm) Current Sensing Resistor Ultra Low ohms(RU, RUK) High Power Resistor General(RCW) R010 40 T 〈 Top View 〉 Current Sensing Resistor Low ohms(RUT) Marking   DC Power Charger, Adapter. Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK)   Plese contact our sales representatives or engineers for other specifications   ‌Current Sensing. General_Standard Reverse(RCB) Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Metal_CSR (RLP & RLC Series) Product Characteristic data Notes Features General_Standard Standard(RC) Specification   Metal Plate Type Ultra Low Ohm Resistor. Type Size (inch) Rated Power (W) Resistance (Ω) T.C.R (ppm/℃) *RLP1608 1608 (0603) 1 1~5m ±150 *RJP1220 1220 (0508) 1 0.5~2m ±100 *RLP2012 2012 (0805) 1 1~5m ±100~±75   Current Sensing *RLP3216 3216 (1206) 1 1~5m ±100~±75   PCM of Battery Pack   Power Supplying Parts, DC Charger, Adapter RLC6432 RLP6432 6432 (2512) 1~3 1~2 0.5m 1~5m ±75   Mobile PC, Note PC, HDD, DSC, LCD   ‌Please contact our sales representatives or engineers for other specifications   High Power with Very Low T.C.R.   100% Lead Free Products.   EU RoHS Compliant.   AEC-Q200 Compliant. Application Power Derating Curve Structure and Dimensions B L 〈 Bottom View 〉 (Unit: mm) Type Resistance L W T **B *RLP1608 1~5mΩ 1.60 ± 0.15 0.80 ± 0.15 0.45 ± 0.15 1~5mΩ : 0.45 ±0.15 *RJP1220 0.5~2mΩ 1.25 ± 0.20 2.00 ± 0.20 0.45 ± 0.15 0.5~2mΩ : 0.35 ±0.15 *RLP2012 1~5mΩ 2.00 ± 0.20 1.20 ± 0.20 0.45 ± 0.15 1~5mΩ : 0.45 ±0.15 *RLP3216 1~5mΩ 3.20 ± 0.20 1.60 ± 0.20 0.45 ± 0.20 1mΩ : 1.00±0.20 2~5mΩ : 0.80±0.20 0.60 ± 0.25 0.5mΩ : 2.40±0.25 1mΩ : 2.21±0.25 2~5mΩ : 1.45±0.25 0.5~5mΩ 6.35 ± 0.25 3.20 ± 0.25 L500 0.5 ±1, ±5 R001 1 ±1, ±5 R002 2 ±1, ±5 R003 3 ±1, ±5 R004 4 ±1, ±5 R005 5 ±1, ±5 Others RLP1608 60 40 -55℃ 70℃ 170℃ 20 Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Land Pattern Standard B A C Sense Size R Value (mΩ) A B C *1608 1~5 0.80 0.50 1.00 *1220 0.5~1 0.75 0.40 2.20 *2012 1~5 1.10 0.80 1.40 *3216 1 2~5 1.80 1.60 1.00 1.40 1.80 6432 0.5~4 5 3.05 2.11 1.27 3.18 3.68 3.68 ※ Reflow soldering only suggested E 6432 F L500 CS Rated Power Dimension & Size Code Tolerance Resistance Packaging code 6432 : 6.4× 3.2(mm) High Voltage Chip Resistor (RCV) 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) A F : ±1% J : ±5%   4-Digit Code - R : Decimal for ohm - L : Decimal for mohm CS : 7” reel Characteristics Performance Item Specification Test Method Short Time Over Load ±0.5% 5 times of rated power for 5 s Temperature Cycle ±0.5% 1,000 cycle, -55~150 ℃, 15 min dwell time (-55~125℃ for 1608) High Temperature Exposure ±1.0% 1,000hr at Maximum operating temperature Load Life ±1.0% 1,000hr at 70℃ applied rated power Biased humidity ±0.5% 1,000hr at 85℃ / 85% RH applied 10% of rated power The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 28 29 Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) 155℃ 0 -60 -40 -20 0   The part number system shall be in the following format D : 0.5W E : 1.0W F : 2.0W G : 3.0W Current Sensing Resistor Wide Terminal(RJ) 100 Parts Numbering System RLC : without top coating RLP : with top coating RJP : wide terminal Current Sensing Resistor Ultra Low ohms(RU, RUK) 120 80 Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) - “R” means decimal point for ohm - “L” means decimal point for mohm Current Code Designation -55~170 Tol. (%) * Under development ** Termination width B can be modified after the discussion. RLP Array Type Resistor Concave(RN, RM, RK) Value (mΩ) Rated Power(%) 〈 Side View 〉 Array Type Resistor Flat(RF, RM) Code B 〈 Top View 〉 -55~155 4-Digit Coding System power follows the below power derating curve. T General_Standard Reverse(RCB) Resistance Code   ‌The rated power is the maximum continuous W Working Temperature (℃) 70 P : Rated Power(W) R : Resistance(Ω) For ambient tempetature above 70℃, the loading RLC6432 RLP6432 P/R    loading power at 70℃ ambient temperature.  L500 Rated Ambient Temperature (℃) Rated Current (A) Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS High Power Chip Resistor Product Characteristic data Notes Features General_Standard Standard(RC) Specification   Thick film type High-Power Resistor   Higher Working Voltage with Anti-Surge and Anti-Pulse. Type   Applicable Both flow and reflow soldering. Size (inch) Rated Power (W)   Suitable size and package for surface mount assembly.   RoHS Compliant.   AEC-Q200 Compliant Application Max working Voltage (V) Rated Voltage (V) Max Overload Voltage (V) RCW0603 0201 1/10 75 150 RCW1005 0402 1/5 150 300 RCW1608 0603 1/4 200 400 RCW2012 0805 1/2 RCW3216 1206 1/1 P×R 400 600 200 400 Tolerance (%) T.C.R (ppm/℃) Resistance Range (Ω) ±0.5(D) ±1.0(F) ±2.0(G) ±5.0(J) ±700 ±400 ±250 ±700 ±400 ±200 1.0~9.9 10~100 101~10M 1.0~9.9 10~100 101~10M Working Temperature (℃) Array Type Resistor Concave(RN, RM, RK) -55~155 Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT)   High Power, High Voltage Power Derating Curve Single Pulse   ‌The maximum applicable voltage is equal to the   ‌Rated power shall be the load power corresponding Structure, Dimensions and Specification A maximum overload voltage. Please contact factory ±2℃ ambient temperature, In case the ambient for resistance characteristics of continuous applied temperature exceeds 70±2℃, reduce the load pulse power in accordance with the derating curve T RCW1005 RCW1608 RCW2012 RCW3216 100 B L 〈 Side View 〉 〈 Bottom View 〉 (Unit: mm) Type L W T A B Weight (mg/K) RCW0603 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.10 ± 0.05 0.15 ± 0.05 0.15mg RCW1005 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 0.6mg RCW1608 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.35 ± 0.15 0.35 ± 0.15 2.1mg *RCW2012 2.00 ± 0.20 1.25 ± 0.15 0.55 ± 0.10 0.30 ± 0.20 0.35 ± 0.20 4.9mg *RCW3216 3.20 ± 0.20 1.60 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 9.5mg 80 Rated Power(%) A 60 40 RCW0603 20 125℃ 0 -60 -40 -20 0 155℃ 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) 10.0 RCW1608 RCW1005 RCW0603 1.0 ※Under test for RCW0603, RCW1006 1 10 100 1,000 10,000 100,000 1,000,000 Duration Time(ns) Land Pattern : Chip Resistor Parts Numbering System A 1608 J 101 CS Dimension & Size Code Tolerance Resistance Value Packing Code High Power Chip Resistor 1608 : 1.6x0.8(mm)-0603(inch) D : ±0.5% F : ±1.0% G : ±2.0% J : ±5.0% 3 or 4 digits coding system (IEC Coding system) 3 Digits(E-24 series) 4 Dights(E-96 series) B (Unit: mm) *Jumper : “000” Reflow Soldering Type mm inch A B 2A + B C RCW0603 0603 0201 0.37 0.28 1.02 0.29 RCW1005 1005 0402 0.60 0.50 1.70 0.50 RCW1608 1608 0603 0.80 0.80 2.40 0.80 RCW2012 2012 0805 0.90 1.40 3.20 1.20 RCW3216 3216 1206 1.30 1.80 4.40 1.50 The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 30 31 Lead free Chip Resistor General, Array, AntiSulfur Packaging A Size Packing Code Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Characteristics Performance : Land Pattern C RCW High Voltage Chip Resistor (RCV) Center Common Array 3-Terminal Array(RFT) * Under development, RCW2012(12. ‘22), RCW3216(06. ‘22) Code Designation Current Sensing Resistor Wide Terminal(RJ) High Power Resistor General(RCW) 100.0 0.1 Current Sensing Resistor Ultra Low ohms(RU, RUK) Metal_CSR Metal Plate_Clad(RLP,RLC) 1,00.0 120 B 〈 Top View 〉 to nominal watt suitable for continuous use at 70 Single Pulse Power(W) W Array Type Resistor Flat(RF, RM) -55~125   General purpose, Downsizing   Anti-Pulse, Anti-Surge(ESD) General_Standard Reverse(RCB) Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS High Voltage Chip Resistor Product Characteristic data Notes Features General_Standard Standard(RC) Specification   Thick film type High-Power Resistor   Higher Working Voltage with Anti-Surge and Anti-Pulse. Type   Applicable Both flow and reflow soldering. Rated Power (W) Size (inch)   Suitable size and package for surface mount assembly.   RoHS Compliant.   AEC-Q200 Compliant Application Max working Voltage (V) Rated Voltage (V) Max Overload Voltage (V) RCV0603 0201 1/20 100 200 RCV1005 0402 1/16 200 400 RCV1608 0603 1/10 350 500 RCV2012 0805 1/8 RCV3216 1206 1/4 P×R 400 600 500 1000 Tolerance (%) T.C.R (ppm/℃) Resistance Range (Ω) ±0.5(D) ±1.0(F) ±2.0(G) ±5.0(J) ±700 ±400 ±250 ±700 ±400 ±200 1.0~9.9 10~100 101~10M 1.0~9.9 10~100 101~10M Working Temperature (℃) Array Type Resistor Concave(RN, RM, RK) -55~155 Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT)   High Power, High Voltage Power Derating Curve   ‌Rated power shall be the load power corresponding to nominal watt suitable for continuous use at 70±2℃ ambient temperature, In case the ambient temperature exceeds 70±2℃, reduce the load power in accordance Structure, Dimensions and Specification W 120 Rated Power(%) 80 B A B L 〈 Top View 〉 〈 Side View 〉 〈 Bottom View 〉 L W T A B Weight (mg/K) *RCV0603 0.60 ± 0.03 0.30 ± 0.03 0.23 ± 0.03 0.10 ± 0.05 0.15 ± 0.05 0.15mg *RCV1005 1.00 ± 0.05 0.50 ± 0.05 0.35 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 0.6mg *RCV1608 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.35 ± 0.15 0.35 ± 0.15 2.1mg *RCV2012 2.00 ± 0.20 1.25 ± 0.15 0.55 ± 0.10 0.30 ± 0.20 0.35 ± 0.20 4.9mg *RCV3216 3.20 ± 0.20 1.60 ± 0.15 0.55 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 9.5mg High Power Resistor General(RCW) 60 RCV0603 40 20 125℃ 0 -60 -40 -20 0 (Unit: mm) Type Metal_CSR Metal Plate_Clad(RLP,RLC) RCV1005 RCV1608 RCV2012 RCV3216 100 T High Voltage Chip Resistor (RCV) 155℃ 20 40 60 80 100 120 140 160 180 Ambient Temperature(℃) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Land Pattern Center Common Array 3-Terminal Array(RFT) : Land Pattern C : Chip Resistor * Under development, RCV0603~RCV1608(02. ‘22), RCV2012(03. ‘23), RCV3216(09. ‘22) A B Characteristics Performance A Parts Numbering System (Unit: mm) Size Reflow Soldering RCV 1608 J 101 CS Type mm inch A B 2A + B C Code Designation Dimension & Size Code Tolerance Resistance Value Packing Code RCV0603 0603 0201 0.37 0.28 1.02 0.29 High Voltage Chip Resistor 1608 : 1.6x0.8(mm)-0603(inch) D : ±0.5% F : ±1.0% G : ±2.0% J : ±5.0% 3 or 4 digits coding system (IEC Coding system) 3 Digits(E-24 series) 4 Dights(E-96 series) Packing Code Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) with the derating curve A Array Type Resistor Flat(RF, RM) -55~125   General purpose, Downsizing   Anti-Pulse, Anti-Surge(ESD) General_Standard Reverse(RCB) RCV1005 1005 0402 0.60 0.50 1.70 0.50 RCV1608 1608 0603 0.80 0.80 2.40 0.80 RCV2012 2012 0805 0.90 1.40 3.20 1.20 RCV3216 3216 1206 1.30 1.80 4.40 1.50 *Jumper : “000” Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 32 33 CHIP RESISTORS CHIP RESISTORS Anti-Sulfur Chip Resistor Product Characteristic data Notes Features Application   Stable in the Sulfur Atmosphere.   Electronic Devices with   long-term reliability.   ASTM B809-95 Satisfied   Server system   (Memory Module / HDD).   Passed 720hrs with the dried Sulfur at 105℃ General_Standard Standard(RC) Parts Numbering System   The part number system shall be in the follow format RCS 2012 Code Designation Dimension & Size Code RCS : Anti-Sulfur General 0402 : 0.4×0.2(㎜)-01005(inch) 0603 : 0.6×0.3(㎜)-0201(inch) 1005 : 1.0×0.5(㎜)-0402(inch) 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 3225 : 3.2×2.5(㎜)-1210(inch) 5025 : 5.0×2.5(㎜)-2010(inch) 6432 : 6.4×3.2(㎜)-2512(inch)   Network Equipment.   High Precision Reliability.   EU RoHS Compliant.   AEC-Q200 Compliant. Structure, Dimensions and Specification J D : ±0.5% F : ±1% G : ±2% J : ±5% *Jumper : J 4P J 150 CS Resistors Tolerance Resistance Value Packaging Code RFS : Anti-Sulfur 06 : 0201 Array Flat 2P : 2 Pieces 4P : 4 Pieces *Jumper : J B B 〈 Side View 〉 RPS 10 4P J 100 CS Dimension Resistors Tolerance Resistance Value Packaging Code 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” 〈 Bottom View 〉 RPS : Anti-Sulfur 10 : 0402 Array Convex 16 : 0603 Array (2) Anti-Sulfur Array (Same with Array) B A C1 T *Jumper : J B C1 *Jumper : ‘000’ T L 〈 Flat Type 〉 P 〈 Convex Type 〉 Type Corresponding Type (RCS) 0402, 0603, 1005, 1608, 3216,3225, 5025, 6432 (RC) 0402, 0603, 1005, 1608, 3216,3225, 5025, 6432 P.10 Flat Type (RFS) 062P, 064P (RF) 062P, 064P P.14 P.15 Convex Type (RPS) 102P, 104P (RP) 102P, 104P P.16 P.17 Anti-Sulfur High Power General (RCWS) 0603, 1005, 1608 (RCW) 0603, 1005, 1608 P.30 P.31 AntiSulfur High Voltage General (RCVS) 0603, 1005, 1608 (RCV) 0603, 1005, 1608 P.32 P.33 Anti-Sulfur Arrays General Structure and Dimensions Specification P.11 Adding Material Temp. Duration Time Decision Criteria ASTM B 809-95 Sulfur 50 g KNO3 200 g Dlwater 200ml 50℃ 720hrs ΔR＜±1% Desiccator (15 Liter) Hanger (PCB Holder) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Packaging 105℃ 720hrs ΔR＜±1% Standard Resistance Value KNO3 [Test Equipment] Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 34 Current Sensing Resistor Low ohms(RUT) Characteristics Performance Sulfur Sulfur 50 g Array Type Resistor Convex(RP) Center Common Array 3-Terminal Array(RFT) Test name Dry Sulfur (IBM recommended) Array Type Resistor Concave(RN, RM, RK) Lead free Chip Resistor General, Array, AntiSulfur Sulfur Corrosion Test Refer to page Anti-Sulfur General 2P : 2 Pieces 4P : 4 Pieces F : ±1% G : ±2% J : ±5% W W Division CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” Code Designation L L 3 digits coding system (IEC coding system) E-24 series *Jumper : ‘000’ T A *Jumper : ‘000’ 06 W 〈 Top View 〉 CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” Dimension J : ±5% General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) RFS A A 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS Code Designation   Same structures, Dimensions and Specifications as the corresponding sizes of non-anti-sulfur products (1) Anti-Sulfur General (Same with General), Anti-Sulfur High Power(Same with High Power) 100 35 CHIP RESISTORS CHIP RESISTORS Lead free Chip Resistor Product Characteristic data Notes Features Application   Totally lead free   General purpose   EU RoHS Compliant.   Home Appliances (TV, Digital Display, Audio, etc)   AEC-Q200 Compliant. General_Standard Standard(RC) Parts Numbering System   The part number system shall be in the follow format   For Computers & Communications  (Notebook, Mobile, etc)   For semiconductor devices Structure, Dimensions and Specification RFH 06 4P J 150 CS Code Designation Dimension Resistors Tolerance Resistance Value Packaging Code RFH : Lead free Flat RMH : Lead free 06 : 0201 Array Inverted & Flat 2P : 2 Pieces 4P : 4 Pieces J : ±5% *Jumper : J 3 digit coding system (IEC coding system) CS : Tape & Reel 7” E-24 series ES : Tape & Reel 10” AS : Tape & Reel 13” *Jumper : ‘000’ Refer to page Structure and Dimensions Specification (RH) 0402, 0603, 1005, 1608, 2012, 3216, 3225, 5025, 6432 (RC) 0402, 0603, 1005, 1608, 2012, 3216, 3225, 5025, 6432 P.10 P.11 Reverse (RHB) 0603, 1005 (RCB) 0603, 1005 P.12 P.13 Flat Type (RFH) 062P, 064P (RMH) 062P, 064P (RF) 062P, 064P (RM) 062P, 064P P.14 P.15 Concave type (RNH) 102P, 104P (RMH) 102P, 104P (RKH) 102P, 104P (RN) 102P, 104P (RM) 102P, 104P (RK) 102P, 104P P.16 P.17 Convex Type (RPH) 102P, 104P (RP) 102P, 104P P.18 P.19 General (RHS) 0402, 0603, 1005, 1608, 2012, 3216, 3225, 5025, 6432 (RCS) 0402, 0603, 1005, 1608, 2012, 3216, 3225, 5025, 6432 P.30 P.31 Flat Type (RFHS) 062P, 064P (RFS) 062P, 064P P.32 P.33 Lead free Anti Sulfur Lead free Anti Sulfur Arrays Corresponding Type General Lead free General Lead free Arrays Type Convex Type (RPHS) 102P, 104P (RPS) 102P, 104P P.34 P.35 RNH : Lead free Concave RMH : Lead free Inverted 10 : 0402 Array Concave RKH : Lead free Short-free & Inverted 2P : 2 Pieces 4P : 4 Pieces RPH : Lead free Convex 2P : 2 Pieces 4P : 4 Pieces J 100 CS Code Designation Dimension & Size Code 0402 : 0.4×0.2(㎜)-01005(inch) 0603 : 0.6×0.3(㎜)-0201(inch) 1005 : 1.0×0.5(㎜)-0402(inch) 1608 : 1.6×0.8(㎜)-0603(inch) 2012 : 2.0×1.2(㎜)-0805(inch) 3216 : 3.2×1.6(㎜)-1206(inch) 3225 : 3.2×2.5(㎜)-1210(inch) 5025 : 5.0×2.5(㎜)-2010(inch) 6432 : 6.4×3.2(㎜)-2512(inch) Tolerance Resistance Value Packaging Code RH : Lead Free Chip Resistor RCB Code Designation RHB : Lead Free Reverse Chip Resistor 603 Dimension & Size Code 0603 : 0.6×0.3(㎜)-0201(inch) 1005 : 1.0×0.5(㎜)-0402(inch) D : ±0.5% F : ±1% G : ±2% J : ±5% *Jumper : J J Tolerance D : ±0.5% F : ±1% G : ±2% J : ±5% *Jumper : J 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” *Jumper : J J : ±5% *Jumper : J 3 digit coding system (IEC coding system) CS : Tape & Reel 7” E-24 series ES : Tape & Reel 10” AS : Tape & Reel 13” *Jumper : ‘000’ 3 digit coding system (IEC coding system) CS : Tape & Reel 7” E-24 series ES : Tape & Reel 10” AS : Tape & Reel 13” *Jumper : ‘000’ 2012 J 100 CS Code Designation Dimension & Size Code Tolerance Resistance Value Packing Code RHS : Lead free Anti-Sulfur General   The part number system shall be in the follow format 2012 F : ±1% J : ±5% RHS Parts Numbering System RH 10 : 0402 Array 16 : 0603 Array 0402 : 0.4×0.2(mm) - 01005(inch) 0603 : 0.6×0.3(mm) - 0201(inch) 1005 : 1.0×0.5(mm) - 0402(inch) 1608 : 1.6×0.8(mm) - 0603(inch) 2012 : 2.0×1.2(mm) - 0805(inch) 3216 : 3.2×1.6(mm) - 1206(inch) 3225 : 3.2×2.5(mm) - 1210(inch) 5025 : 5.0×2.5(mm) - 2010(inch) 6432 : 6.4×3.2(mm) - 2512(inch) D : ±0.5% F : ±1% G : ±2% J : ±5% *Jumper : J 3 or 4 digits coding system (IEC coding system) 3digits(E-24 series) 4digits(E-96 series) CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” RFHS 06 4P J 150 CS Dimension Resistors Tolerance Resistance Value Packing Code 2P : 2 Pieces 4P : 4 Pieces J : ±5% *Jumper : J 3 digit coding system (IEC coding system) CS : Tape & Reel 7” E-24 series ES : Tape & Reel 10” AS : Tape & Reel 13” *Jumper : ‘000’ *Jumper : ‘000’ 100 Resistance Value 3 or 4 digits coding system (IEC coding system) 3digits (E-24 series) 4digits (E-96 series) CS Packaging Code RPHS : Lead free Anti10 : 0402 Array Sulfur Convex 2P : 2 Pieces 4P : 4 Pieces F : ±1% G : ±2% J : ±5% 3 or 4 digits coding system (IEC coding system) 3digits(E-24 series) 4digits(E-96 series) CS : Tape & Reel 7” ES : Tape & Reel 10” AS : Tape & Reel 13” *Jumper : J *Jumper : ‘000’ The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 36 37 Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution *Jumper : ‘000’ CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” Array Type Resistor Concave(RN, RM, RK) Center Common Array 3-Terminal Array(RFT) *Jumper : ‘000’ Code Designation RFHS : Lead free Anti06 : 0201 Array Sulfur Flat Array Type Resistor Flat(RF, RM) Array Type Resistor Convex(RP)   Same structures, Dimensions and Specifications as the corresponding sizes of non-anti-sulfur products Division General_Standard Reverse(RCB) Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Center Common Array 3-Terminal Array(RFT) Features Product Characteristic data Notes General_Standard Standard(RC) Specification   Saving SMD surface area   Saving SMD cost Type   Three Terminal Two Resistance Size (inch) Rated Power [W]   Customized Resistance Array Rated Voltage [V]      RoHS Compliant. RFT032P 0101 1/32 Tolerance (%) P×R Resistance Range (Ω) F: ±1% J: ±5% P : Rated Power(W) R : Resistance(Ω) T.C.R. (ppm/℃) 1kΩ ~51kΩ 300 Rated Working Ambient Temperature Temperature (℃) (℃) -55~125℃ 70 Moisture Level Level 1 Application   For semiconductor devices. For ambient tempetature above 70℃, the loading power follows the below power derating curve. Current Sensing Resistor Ultra Low ohms(RU, RUK) Percentage of the rated dissipation(%) 100 W T T1 A L 〈 Top 〉 〈 Side 〉 80 Operation area 40 0 -55 70 -40 0 L W T T1 A B Average Weight RFT032P 0.61 ± 0.03 0.30 ± 0.03 0.22 ± 0.03 0.04 ± 0.03 0.10 ± 0.03 0.095 ± 0.03 0.15 mg 40 80 120 Ambient Temperature(℃) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Cm A B Am   The part number system shall be in the follow format RFT 3 2P J 101 CS Code Designation Dimension Resistors Tolerance Resistance Value Packaging Code 032P : 2 Pieces J : ± 5% High Power Resistor General(RCW) D Parts Numbering System 03 : 0603 Array 125 Land Pattern Type 3 digits coding system (EC coding system) E-24 series Metal_CSR Metal Plate_Clad(RLP,RLC) 20 (Unit: mm) RFT : Center Common Array Current Sensing Resistor Wide Terminal(RJ) 60 B 〈 Bottom 〉 Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Low ohms(RUT)   ‌The rated power is the maximum continuous loading power at 70℃ ambient temperature.  Structure, Dimensions and Specification Array Type Resistor Flat(RF, RM) Array Type Resistor Convex(RP) Power Derating Curve   For mobile, digital circuits. General_Standard Reverse(RCB) C Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) A Dimension A Am B D (2A+2B+Am) C Cm RFT032P 0.15 0.16 0.155 0.77 0.3 0.36 Characteristics Performance Packaging CS : Tape Packaging 7” ES : Tape Packaging 10” AS : Tape Packaging 13” Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 38 39 CHIP RESISTORS CHIP RESISTORS Characteristics Performance Product Characteristic data Notes Electrical Characteristic Item DC resistance Temperature Coefficient of resistance(TCR) General_Standard Standard(RC) Mechanical Characteristic Requirements Specification Resistor 1. DC resistance value should be witnin the specified resistance tolerance. Jumper Less Than 50mΩ Refer to the specification Test Method Item   Standard : JIS C 5201-1 (4.5)   Voltage apply within 5sec   Temp(20℃), Humidity(65% RH) [ Fig 4 ] Solderability   Standard : JIS C 5201-1 (4.8)   Temp(℃) -+20 → -55 → 20 → 125 → 20℃   Calculation(ppm/℃) : TCR = (R-Ro)/Ro × 1(T-To)×106 - To : 20±2℃ - Ro : Resistance at 20℃(Ω) - T : Test temperature(-55,+125℃) - R : Resistance at -55 or +125℃(Ω) Bending Strength Requirements Specification Resistor Jumper 1. Solder should cover more than 95% of termination. 2. No crack of termination parts and no ceramic exposure of surface by melting. 1. No mechanical damage 2. ΔR should be within ±(1.0% + 0.05Ω) General_Standard Reverse(RCB) Test Method   Standard : JIS C 5201-1 (4.17)   Temp : 245±5℃   Times : 2±0.5sec(Dipping both side)   Standard : JIS C 5201-1 (4.33)   Test method : After soldering resistance on the PCB press to 3mm, then keep 10sec.   Pressure speed : 1mm/1Sec [ Fig 5 ] Less Than 50mΩ 20 1. No mechanical damage 2. △R should be within ±(1.0%+0.1Ω) 1. No mechanical damage Intermittent overload 2. △R should be within (IMOL) ±(3.0%+0.1Ω) Dielectric withstanding Voltage Insulation resistance ESD Characteristics (only for high power resistor) Less Than 50mΩ Less Than 50mΩ 1. No mechanical damage, short circuit or disconnection. 1. Insulation resistance should be higher than 1,000㏁ 1. No mechanical damage 2. △R should be within ±(5.0%+0.1Ω) Less Than 50mΩ   Standard : JIS C 5201-1 (4.13)   Voltage : 2.5 times of rated voltage   Times : 5sec   Standard : JIS C 5201-1 (4.39)   Voltage : 2.5 times of rated voltage   Test method - 1sec on, 25sec off, 10,000+400Cycle Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) R230 Short time overload (STOL) Array Type Resistor Flat(RF, RM) 3 Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) Adhesive strength of 1. No mechanical damage or sign of disconnection. Termination   Standard : JIS C 5201-1 (4.7)   Voltage : - 0402, 0603 : DC 50V - 1005, 1608 : DC 100V - 2012~6432 : DC 500V   Times : 60sec Resistance to soldering heat   Standard : JIS C 5201-1 (4.6)   Voltage : - 0402, 0603 : DC 50V - 1005, 1608 : DC 100V - 2012~6432 : DC 500V   Times : 60sec   Standard : JEDEC-A114(HBM)   C : 100pF   R : 1.5㏀   Times : +/- 3 times   Voltage : 1KV~8KV Anti-Vibration 1. No mechanical damage 2. ΔR should be within ±(1.0% + 0.05Ω) 1. No mechanical damage 2. ΔR should be within ±(1.0% + 0.05Ω) Less Than 50mΩ Less Than 50mΩ   Standard : JIS C 5201-1 (4.32)   Strength - 0402~0603(2N or 200gf) - 1005~1608(5N or 500gf)   Times : Pressure for 10sec.   Standard : JIS C 5201-1 (4.18)   Temp(260℃) - Flow : Max 10sec(Both side dipping) - Reflow : Max 10sec(230℃↑, 30sec)   Measure method - Wait 60 minutes at room temp. and then measure the resistance value.   Standard : JIS C 5201-1 (4.22)   Measure method - 2 Hours each in x, y and z axis (total 6 hours) - 10 to 55Hz sweep in 1 minute at 1.5mm amplitude. High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 40 41 CHIP RESISTORS CHIP RESISTORS Characteristics Performance Product Characteristic data Notes Environmental Characteristic Item Temperature Cycle Requirements Specification Resistor 1. No mechanical damage 2. ΔR should be within ±(1.0%+0.1Ω) 1. No mechanical damage Moisture resistance 2. ΔR should be within (Damp heat with load) ±(3.0%+0.1Ω) Low temperature exposure High temperature exposure Load life Flower of Sulfur (Sulfur corrosion) 1. No mechanical damage 2. ΔR should be within ±(3.0%+0.1Ω) 1. No mechanical damage 2. ΔR should be within ±(3.0%+0.1Ω) 1. No mechanical damage 2. ΔR should be within ±(3.0%+0.1Ω) 1. ΔR should be within ±(1.0%+0.1Ω) General_Standard Standard(RC) Test Flow soldering Conditions Jumper Less than 50mΩ Less than 50mΩ Less than 50mΩ Less than 50mΩ Less than 50mΩ Less than 50mΩ Test Method Item Specification Dipping Flux ROSIN 25%, IPA 75% Time: 5~10 sec. Solder Sn-3.0Ag-0.5Cu Time : 10 sec max. Temp. : 260±5℃.   Standard : JIS C 5201-1 (4.19)   Cycle : Perform 100 cycles as follow   Cycle step(℃) - 20 → -55/30min → 20 → 125/30min Array Type Resistor Flat(RF, RM)   Standard : JIS C 5201-1 (4.24)   Condition - Temp(40±2℃), Humidity(93±3% RH)   Voltage : Rated Voltage   Times - 1,000±48 hours - 90min On, 30min Off Array Type Resistor Convex(RP)   Standard : JIS C 5201-1 (4.23)   Temp : -55±2℃   Times : 1,000±48 hours - Not applied load   Measure method - Keep 60 minutes in room temp before measuring Current Sensing Resistor Wide Terminal(RJ) Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW)   Standard : JIS C 5201-1 (4.23)   Temp - 04023, 0603 : +125±2℃ - 1005~6432 : +155±2℃   Times : 1,000±48 hours - Not applied load   Measure method - Keep 60 minutes in room temp before measuring High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT)   Standard : JIS C 5201-1 (4.25)   Temp : 70±2℃   Voltage : Rated Voltage   Times - 1,000±48 hours - 90min On, 30min Off   Measure method - Keep 60 minutes in room temp before measuring Characteristics Performance Packaging Standard Resistance Value   Standard : ASTM-B-809   Temp : 105±2℃   Test Time  - 720±2hours, - Not applied load   Measure method : Keep 2 hours in room temp before measuring   Test board : [ fig 6 ] Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 42 General_Standard Reverse(RCB) 43 CHIP RESISTORS CHIP RESISTORS Packaging Product Characteristic data Notes Taping Type   Reel dimensions (Unit: mm) Symbol Tape Width A B C D 8mm Ø 180+0/-3 Ø 60 ± 1.0 Ø 13.0 ± 0.3 4 ± 0.2 7” Reel 13” Reel C CB D Symbol Ø 60 ± 1.0 Ø 13.0 ± 0.3 4 ± 0.2 WS 13” 150,000 695 CS 7” 20,000 121 AS 13” 60,000 573 CS 7” ES 10” 8mm Ø 330 ± 2.0 Ø 100 ± 1.0 Ø 13 ± 0.5 4 ± 0.2 12mm Ø 330 ± 2.0 Ø 100 ± 1.0 Ø 13 ± 0.5 4 ± 0.2 0201 AS 13” 40,000 539 2.0 ± 0.5 13 ± 0.5 1.2 ± 0.2 CS 7” 5,000 120 8mm 2.0 ± 0.5 9 ± 0.5 1.8 ± 0.2 12mm 2.0 ± 0.5 13 ± 0.5 1.8 ± 0.2 8mm 3.3 ± 0.5 9 ± 0.5 2.2 ± 0.2 12mm 3.3 ± 0.5 13 ± 0.5 2.2 ± 0.2 1608 0816* 0402 0603 0306* 2012 1220* 0805 0508* 1220 2mΩ 0508* 8.0±0.1 3.5±0.05 Type Size Size (inch) RC/RCS 0402 0603 01005 0201 B 8.0±0.1 3.5±0.05 Type RC/RCS T Size Size (inch) 0402 0603 032P 01005 0201 0201 A B T 0.24±0.03 0.45±0.03 0.31±0.02 0.38±0.05 0.68±0.05 0.42±0.05 0.40±0.05 0.70±0.05 0.42±0.05 8.0±0.1 3.5±0.05 Size (inch) RC/RCS/ RU/RUT 1005 0402 0.65±0.10 1.15±0.10 0.43±0.07 062P 064P 102P 104P 102P 104P 0302 0502 0404 0804 0404 0804 0.70±0.10 0.70±0.10 1.17±0.10 1.20±0.10 1.20±0.10 1.20±0.10 RM/RFS RM/RK 1.75±0.1 Type Size Size (inch) 1608 0816 2012 1220 3216 1632 3225 164P 0603 0306 0805 0508 1206 0612 1210 1206 Type Size Size (inch) RC/RCS/ RU/RUT/ RUK/RJ/ RLC 2037 5025 6432 3264 0815 2010 2512 1225 RC/RCS/ RU/RUT/ RUK/RJ RC/RPS 4mm 12mm 3225 1210 A A B 0.90±0.10 1.60±0.10 1.20±0.10 2.20±0.10 1.20±0.10 2.20±0.10 B T 0.30±0.05 0.30±0.05 0.43±0.07 0.43±0.07 0.43±0.07 0.60±0.10 2.00±0.20 3.60±0.20 0.75±0.10 2.90±0.20 3.60±0.20 0.75±0.10 2.00±0.20 3.60±0.20 0.75±0.10 10” 10,000 324 13” 20,000 561 CS 7” 5,000 144 10,000 360 20,000 658 4,000 100 5,000 152 10,000 382 20,000 695 ES 10” AS 13” CS 7” CS 7” ES 10” AS 13” CS 7” ES 10” AS 13” Punched Paper Punched Paper Embossed Plastic Punched Paper Punched Paper 5,000 178 10,000 463 20,000 674 0815 CS 7” Embossed Plastic 4,000 145 5025 2010 CS 7” Embossed Plastic 4,000 197 6432 3264* 2512 1225* CS 7” 4,000 262 AS 13” 15,000 1,041 4,000 470 20,000 134 60,000 573 20,000 137 60,000 573 10,000 95 6432** 2512** 062P 0201×2R 064P 0201×4R 0402×2R 104P 0402×4R 164P 0603×4R 1.10±0.20 1.90±0.20 0.60±0.10 1.65±0.20 2.40±0.20 0.75±0.10 ES AS 2037 102P T Punched Paper CS 7” CS 7” AS 13” CS 7” AS 13” CS 7” AS 13” CS 7” AS 13” CS 7” AS 13” Embossed Plastic Embossed Plastic Punched Paper Punched Paper Punched Paper Punched Paper Punched Paper 40,000 485 10,000 131 40,000 610 5,000 152 20,000 695   Packing type can be modified after discussion.    (*) Wide Terminal Type     (**) Metal Type Ultra Low ohm A B General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 1.75±0.1 5.5±0.05 Φ1.5+1/0 1206 0612* 0.24±0.03 0.45±0.03 0.31±0.02 0.38±0.05 0.68±0.05 0.42±0.05 Size A 0.3±0.2 T B Type RP/RPS 12.0±0.2 4.0±0.1 2.0±0.05 1.75±0.1 8.0±0.1 8mm T A 1.75±0.1 3.5±0.05 1.5+1/0 1.0 3216 1632 1.75±0.1 A 4.0±0.1 331 12mm 1.5+1/0 2.0±0.05 87 30,000 1.2 ± 0.2 B T Punched Paper 10,000 9 ± 0.5 1005 A 8mm Pressed Paper 2.0 ± 0.5 1.0 44 032P 8mm RFT 4.0±0.1 573 4 ± 0.2 1.5+1/0 2.0±0.05 121 60,000 Ø 13 ± 0.3 B T Pressed Paper Ø 13 ± 0.3 A 8mm 13” 138 Ø 81 ± 1.0 B 4.0±0.1 AS 20,000 15,000 Ø 81 ± 1.0 1.5+1/0 1.0±0.05 Pressed Paper 7” Ø 258 ± 3 Dimensions T 7” CS Weight Ø 258 ± 3 Carrier Width 8mm CS Quantity 8mm 1.0 Embossed Plastic 0201 (Unit: mm) Pressed Paper 4mm 0603 Carrier Tape 12mm 1.0 2mm 1005 Reel T W t 2.0±0.1 2mm 0402 4 ± 0.2   Tape dimensions 1mm Code W 13” Reel Pitch Type (inch) E 10” Reel Type Taping Packaging Type (mm) Tape Width 7” Reel A Ø 180+0/-3 12mm 10” Reel E General_Standard Standard(RC) Packing Table T 2.30±0.20 4.00±0.20 1.00±0.10 2.90±0.20 5.40±0.20 1.00±0.10 3.30±0.20 6.60±0.20 1.00±0.10 A The specifications and designs contained herein may be subject to change without notice. Please contact our sales representatives or product engineers before order. 45 CHIP RESISTORS CHIP RESISTORS Standard Resistance Value Electrical & Mechanical Caution Tolerance Code Table Precautions and Application Restrictions Tolerance Code D F Digit Number G J K 4 digit   Precautions for Product Safety M 3 digit IEC-Code System E-192 E96 E-48 E-24 E-12 E-6 Specification ± 0.5% ± 1% ± 2% ± 5% ± 10% ± 020% Significant Figure of Resistance Value E-192 100 101 102 104 105 106 107 109 110 111 113 114 115 117 118 120 121 123 124 126 127 129 130 132 133 135 137 138 140 142 143 145 147 149 150 152 154 156 158 160 162 164 165 167 169 172 174 175 E-96 100 E-48 100 E-24 10 102 105 105 107 110 110 11 113 115 115 118 121 121 12 124 127 127 130 133 13 133 137 140 140 143 147 147 150 154 15 154 158 162 162 16 165 169 169 174 E-192 178 180 182 184 187 189 191 193 196 198 200 203 205 208 210 213 215 218 221 223 226 229 232 234 237 240 243 246 249 252 255 258 261 264 267 271 274 277 280 284 287 291 294 298 301 305 309 312 E-96 178 E-48 178 182 187 E-24 18 187 191 196 196 200 20 205 205 210 215 215 221 22 226 226 232 237 237 243 249 24 249 255 261 261 267 274 274 27 280 287 287 294 301 301 30 309 E-192 316 320 324 328 332 336 340 344 348 352 357 361 365 370 374 379 383 388 392 397 402 407 412 417 422 427 432 437 442 448 453 459 464 470 475 481 487 493 499 505 511 517 523 530 536 542 549 556 E-96 316 E-48 316 E-24 324 332 332 33 340 348 348 357 365 365 36 374 383 383 392 402 39 402 412 422 422 432 442 43 442 453 464 464 475 487 47 487 499 511 511 523 536 536 549 51 E-192 562 569 576 583 590 597 604 612 619 626 634 642 649 657 665 673 681 690 698 706 715 723 732 741 750 759 768 777 787 796 806 816 825 835 845 856 866 876 887 898 909 920 931 942 953 965 976 988 E-96 562 E-48 562 576 590 590 604 619 619 634 649 665 681 681 715 750 750 787 825 46 82 866 909 931 953   3) It is not recommended to use halogen products such as chlorine (Cl), bromine (Br), etc. or fluxes that are highly active due to the residue that is able to affect the characteristics or reliability of a resistor.   5) When soldering manually, do not touch a resistor body with the edge of soldering iron directly. When working with a soldering iron at high temperature, please be done with the work as quick as possible. 866 887 909   2) When transitory load is used in which short-time load is applied such as pulse, a resistor should be tested on a board mounted. If load is higher than rated voltage under the load conditions at continuous steps, it causes damages on characteristics or reliability of the resistor. Therefore, when load exceed the rated voltage, it is not allowed to apply.   4) Be careful with the soldering condition to avoid the Ag-solder penetration problems. 845 953 976 91   6) Physical shocks to the resistor can cause the breaking of protective layers of the product and affect its characteristic adversely. Therefore, use caution when picking and moving Chip-R with hard instruments such as metal tweezers in order to avoid damages on a resistor or degradation of product performance degradation.   7) Do not soak the resistor in a solvent for a long time. Also, the effect of solvent must be checked prior to use.   8) Place products carefully to keep the standard temperature range in the category, otherwise increasing temperature caused by adjacent heat-generating components can exceed the temperature range. In addition, do not place or install heat-emitting components or flammable materials such as plastic coating wires near these products.   9) Safety can be guaranteed only when average power is lower than rated power, and if power exceeding the rated power is applied, please make sure to make an inquire on surge voltage or a current waveform for a short time. E-24 series ±5% E-96 series ±1% 99Ω 101Ω 100Ω 75 806 825   4) It is a must to notify the person in charge of sales of issues on product safety at any time. In addition, a regular monitor for product safety should be conducted by customers.   1) Product characteristics must be evaluated on a board mounted. 768 787 ① Various types of liquid including water, oil, organic solvent and other chemicals.  ② Direct sunlight, outdoors, or atmosphere with an amount of dusts.   ③ An amount of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, NO2, and etc.  ④ Strong static electricity or electromagnetic waves   ⑤ Heat-producing components or inflammable materials are close.  ⑥ A resistor is sealed or coated with materials such as synthetic resin, and etc.  ⑦ Water or water-soluble detergent is used for cleaning free soldering or flux coating after   ⑧ Condensation phenomenon occurs on the object.  ⑨ Out of the range from -55 °C to +155(125) °C   Precautions regarding the use of products 732 E-12 series ±10% 95Ω 68 698 715   2) The products are designed for use in the standard environment. Do not use products in specific environment that can affect a product performance. If you need to use products in the following conditions, please contact our sales in-charge in advance.   3) The products have no radiation resistance. E-6 series ±20% 90Ω 62 649   Example 80Ω E-24 56   1) The products are designed and produced for general electronic devices applications. User must contact our sales in-charge before using our products, if there is a risk to occur critical issues, such as casualties due to breakdown or malfunction of devices from application on products demanding high reliability or other safety devices, also for complicated products such as medical equipment, transportation equipment, an aircraft/ spacecraft, an atomic energy controller, a fuel controller, automobile equipment, military equipment, disaster/ crime preventive equipment. 105Ω 110Ω 120Ω 47 Product Characteristic data Notes General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application CHIP RESISTORS CHIP RESISTORS Electrical & Mechanical Caution Product Characteristic data Notes   Others General_Standard Standard(RC)   Vibration   1) The product specifications are subject to change, modify or suspend at any time without prior notice by our company. Hence, it is a must to get approval of the product specifications before making orders for products. For more inquires on the product specifications, please contact our sales in-charge or engineer (AE).   2) Without our permission, any copies, duplications, use or transmission of contents or information contained in this specification (catalog) for any purpose are prohibited.   3) No responsibility shall be held for any claims, disputes, damages or liabilities arising from or related to the misuse of the Products and or information contained in this Specification (Catalog). In addition, regarding the use of the products and information contained in this Specification (Catalog), no liability shall be held for any claims, disputes, damages or liabilities relating to our or any third party ’ s intellectual property rights or other related rights.   4) Bilateral discussions shall be required in case there are unmarked or uncertain parts in the specification (catalog). Failure Mechanism   1) Vibrations, shock types and resonance status must be checked.   2) Mount a chip resistor to prevent resonance occurrence and any effects on the terminal should not be allowed.   Shock   1) Mechanical shocks due to a drop may cause not only damages or cracks on a chip resistor, and but also a degradation of its quality and reliability. Thus, it is a must not to use dropped products.   2) When stacking or handling substrates, use caution for the edge of other substrates to prevent shocks, cracks or other damages on the Chip.   Voltage Coefficient of Resistance : VCR Current Sensing Resistor Ultra Low ohms(RU, RUK) Resistance(%)   3) A formula and a graph to check VCR characteristics are as follows. 6 R2 ‒ R1 1 V.C.R (ppm / v ) = ( )×( )×10 v2 ‒ v1 R1 V1 R1 V2 (V) Normal   3) Overvoltage refers to the voltage higher than rated voltage. Abnormal (Ω)   1) EOS is a phenomenon in which R-value decreases or destroys due to destroyed insulation resistance  since overload is applied for a very short time (ns) compared to overload stress.   3) Characteristics of EOS overvoltage are inversely proportional to the distance between electrodes of   a resistor, thus the use of large size products can minimize EOS effects. Center Common Array 3-Terminal Array(RFT) Standard Resistance Value   1) Since guaranteed power characteristics are varied with times applying to pulses, the change in the guaranteed power characteristics should be marked in a graph so that a developer can refer to it.   2) There are products for anti-pulse, and products only for circuit with pulses applied must be used. A pulse graph is not provided for general products, but does for anti-pulse products. 48 Lead free Chip Resistor General, Array, AntiSulfur Packaging   Failures caused by pulse Limitiong Power High Voltage Chip Resistor (RCV) Characteristics Performance   2) Overvoltage refers to a voltage in kilovolts(KV) is applied for Nano second(ns). Pp Metal_CSR Metal Plate_Clad(RLP,RLC) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) R2   Failures caused by (EOS) Electric Overstress Current Sensing Resistor Wide Terminal(RJ) High Power Resistor General(RCW) V2 (Rated Voltage), V1(Rated Voltage x 1/10) Electrical & Mechanical Caution Process of Mounting Soldering, Design General Anti-Pulse Watt(W) Array Type Resistor Convex(RP)   2) Therefore, defects can be caused by the difference of R-value by voltage affects measurement. Duration Time(t) 14 12 10 8 6 4 2 0 Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Low ohms(RUT)   2) When overvoltage is continuously applied, heat generated by a resistor destroys glass insulation R so that R-value can decrease at the initial stage. If overvoltage is still applied after the decrease o R-value, a metal conductor is destroyed so that R-value can increase. In a result, open failure occurs at the end.  * (R = resistance / R-value = resistance-value) Pulse duration Array Type Resistor Flat(RF, RM)   1) In case micro defects (foreign matters, void) are inside of the resistor, electric current cannot be applied at low voltage but an increase of voltage allows the electric current to be applied.   Failures caused by overload stress   1) Open failure occurs due to the burnt resistor from remaining area of the resistor after trimming. The change in R-values over time is as shown in the graph below. General_Standard Reverse(RCB) Caution of Application 1μs 10μs 100μs 1ms 10ms 100ms 1sec 49 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering Mounting Product Characteristic data Notes Caution before Mounting   Mounting position   It is recommended to store and use chip resistor in a reel. Do not re-use chip resistor that was isolated from the reel.  It is recommended to locate the major axis of chip resistor in parallel to the direction in which the stress is applied.   Check the capacitance characteristics under actual applied voltage.   Check the mechanical stress when actual process and equipment is in use.   Check the rated capacitance, rated voltage and other electrical characteristics before assembly.   Heat treatment must be done prior to measurement of capacitance.   Check the solderability of chip resistor that has passed shelf life before use. Not recommended Recommended   Cautions during mounting near the cutout   The use of Sn-Zn based solder may deteriorate the reliability of chip resistor. Cautions during Mounting with Mounting (pick-and-place) Machines  Please take the following measures to effectively reduce the stress generated from the cutting of PCB. Select the mounting location shown below, since the mechanical stress is affected by a location and a direction of chip resistor mounted near the cutting line. 4 2 ※ Relative mechanical stress ② > ① ③ > ① ④>① Cutting line   Mounting Head Pressure  Excessive pressure may cause cracks in chip resistor.  It is recommended to adjust the nozzle pressure within the maximum value of 300gf.  Additional conditions must be set for both thin film and special purpose chip resistor.   Bending Stress  When using a two-sided substrate, it is required to mount chip resistor on one side first Before mounting on the other side due to the bending of the substrate caused by the mounting head.  Support the substrate as shown in the picture below when chip resistor is mounted on the other side.  If the substrate is not supported, bending of the substrate may cause cracks in chip resistor. 1 3 Nozzle Force   Cautions during mounting near screw  If chip resistor is mounted near a screw hole, the board deflection may be occurred by screw torque. Mount chip resistor as far from the screw holes as possible. General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Support Pin   Suction nozzle Not recommended Recommended  Dust accumulated in a suction nozzle and suction mechanism can impede a smooth movement of the nozzle.   This may cause cracks in chip resistor due to the excessive force during mounting. If the mounting claw is worn out, it may cause cracks in chip resistor due to the uneven force During positioning.  A regular inspection such as maintenance, monitor and replacement for the suction nozzle and mounting claw should be conducted. Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 50 51 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering Reflow soldering Product Characteristic data Notes   Reflow temperature Chip resistor is in a direct contact with the dissolved solder during soldering, which may be exposed to potential mechanical stress caused by the sudden temperature change.  Therefore, chip resistor may be contaminated by the location movement and flux.   For the reason, the mounting process must be closely monitored. Method Classification Infrared rays Overall heating Hot plate VPS(Vapor phase) Reflow soldering Air heater Local heating Laser Light beam  The following quality problem may occur when chip resistor is mounted with a lower temperature Than the reflow temperature recommended by a solder manufacturer. The specified peak temperature must be maintained after taking into consideration the factors such as the placement of peripheral constituent and the reflow temperature. Peak Temp(260±5℃) Peak time(10~30 Sec) TP(260℃) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP)   Cooling Current Sensing Resistor Low ohms(RUT)   Natural cooling with air is recommended.   ㆍOverly the thick application of solder pastes results in an excessive solder fillet height.  This makes chip resistor more vulnerable to the mechanical and thermal stress from the board, which may cause cracks in chip resistor.   ㆍToo little solder paste results in a lack of the adhesive strength, which may cause chip resistor to isolate from PCB Max. Ramp Up Rate = 3℃/Sec Max. Ramp Down Rate = 6℃/Sec   ㆍCheck if solder has been applied uniformly after soldering is completed. TL(217℃) Gradual cooling in the air Tsmin(150℃) Pre-heating time 60~120 Sec Too Much Solder large stress may cause cracks Soldering time 60~150 Sec  Use caution not to exceed the peak temperature (260℃) and time (30sec) as shown. Pre-heating is necessary for all constituents including the PCB to prevent the mechanical damages on chip resistor. The temperature difference between the PCB and the component surface must be kept to the minimum.  As for reflow soldering, it is recommended to keep the number of reflow soldering to less than three times. Please check with us when the number of reflow soldering needs to exceed three times. Care must be exercised especially for the ultra-small size, thin film and high capacitance chip resistor as they can be affected by thermal stress more easily. Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) Tsmax(200℃) Max 60 Sec General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM)  ㆍDrop in solder wettability  ㆍSolder voids  ㆍPotential occurrence of whisker  ㆍDrop in adhesive strength  ㆍDrop in self-alignment properties  ㆍPotential occurrence of tombstones   Optimum solder flux for reflow soldering   Reflow Profile General_Standard Standard(RC) Not enough Solder Weak holding force may cause bad connections or detaching of the capacitor ㆍIt is required to design a PCB with consideration of a solder land pattern and its size to apply an appropriate amount of solder to chip resistor. The amount of the solder at the edge may impact directly on cracks in chip resistor. ㆍThe design of a suitable solder land is necessary since the more the solder amount is, the larger the force chip resistor experiences and the higher the chance chip resistor cracks. High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 52 53 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering Flow soldering Product Characteristic data Notes   How to use a soldering Iron   ㆍIn order to minimize damages on MILL, preheating chip resistor and PCB is necessary. A hot plate and a hot air type preheater should be used for preheating   Flow profile   ㆍDo not cool down chip resistor and PCB rapidly after soldering. 260±3℃ Soldering (260℃)   ㆍKeep the contact time between the outer termination of chip resistor and the soldering iron as short as possible. Long soldering time may cause problems such as adhesion deterioration by the leaching phenomenon of the outer termination. Gradual cooling in the air ΔT Max(150℃) Variation of Temp. Soldering Temp.(℃) Pre-heating Time(sec) Soldering Time(sec) Cooling Time(sec) ΔT ≤ 130 300 ± 10℃ max ≥60 ≤4 - * Control Δ T in the solder iron and preheating temperature. Pre-heating (150℃) Soldering time Max(5 Sec)  Take caution not to exceed peak temperature (260℃) and time (5sec) as shown.  Flow soldering is recommended only for 0603(inch) size or bigger sizes.   It must be consulted with our sales representatives or engineers before using a special models.   Caution before Flow soldering  When a sudden heat is applied to chip resistor, the mechanical rigidity of chip resistor is Deteriorated by the internal deformation of chip resistor. Preheating all the constituents including PCB is required to prevent the mechanical damages on chip resistor. The temperature difference between the solder and the surface of chip resistor must be kept to the minimum. Wattage Tip diameter Soldering time 20W max 3㎜ max 4sec max * Caution - Iron tip should not contact with ceramic body directly Lead-free solder: Sn-3.0Ag-0.5CU  Compared to local heating using a solder iron, heat by a spot heater heats the overall chip resistor and the PCB, which is likely to lessen the thermal shocks.  For a high density PCB, a spot heater can prevent the problem to connect between a solder iron and chip resistor directly.   ㆍIf the distance from the air nozzle outlet to chip resistor is too close, chip resistor may be cracked due to the thermal stress. Follow the conditions set in the table below to prevent this problem.   ㆍThe spot heater application angle as shown in the figure is recommended to create a suitable solder fillet shape. Hot Air Application angle 45℃ Hot Air Temperature Nozzle Outlet 400℃ ≥ Application Time 10s＞ at e He Soldering Iron Manual soldering can pose a great risk on creating thermal cracks in chip resistor. The high temperature soldering iron tip may come into a direct contact with the ceramic body of chip resistor due to the carelessness of an operator. Therefore, the soldering iron must be handled carefully, and close attention must be paid to the selection of the soldering iron tip and to temperature control of the tip. Array Type Resistor Convex(RP) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) 5㎜ ≤ rN oz  If the flow time is too long or the flow temperature is too high, the adhesive strength with PCB may be deteriorated by the leaching phenomenon of the outer termination, or the capacitance value may be dropped by weak adhesion between the internal termination and the outer termination. Array Type Resistor Concave(RN, RM, RK) Current Sensing Resistor Wide Terminal(RJ)   How to use a spot heater Distance Array Type Resistor Flat(RF, RM) Current Sensing Resistor Ultra Low ohms(RU, RUK) zle Flow Soldering Conditions General_Standard Reverse(RCB) Current Sensing Resistor Low ohms(RUT) Condition of Iron facilities Pre-heating time Min(120 Sec) General_Standard Standard(RC) 45° Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 54 55 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering Product Characteristic data Notes Printed Circuit Board Cropping   Cautions for re-work   ㆍToo much solder amount will increase the risk of PCB bending or cause other damages.   ㆍDo not apply any stress to chip resistor such as bending or twisting the board after mounting chip resistor on the PCB.   ㆍToo little solder amount will result in chip resistor breaking loose from the PCB due to the inadequate adhesive strength.   ㆍThe stress as shown may cause cracks in chip resistor when cutting the board.   ㆍCheck if the solder has been applied properly and ensure the solder fillet has a proper shape.   ㆍCracked chip resistor may cause degradation to the insulation resistance, thereby causing short circuit.   ㆍAvoid these types of stresses applied to chip resistor. General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) * Soldering wire below Ø0.5mm is required for soldering. Bending Twisting   Cautions for cutting PCB Cleaning   In general, cleaning is unnecessary if rosin flux is used.  When acidic flux is used strongly, chlorine in the flux may dissolve into some types of cleaning fluids, thereby affecting the performance of chip resistor.  This means that the cleansing solution must be carefully selected and should always be new.   Cautions for cleaning  Check a cutting method of PCB in advance.  The high density board is separated into many individual boards after the completion of soldering.  If the board is bent or deformed during separation, chip resistor may be cracked.  Carefully select a separation method that minimizes the deformation of the PCB. Cautions for using electrical measuring probes   ㆍWatch for PCB bending caused by the pressure of a test-probe or other equipment.   ㆍIf the PCB is bent by the force from the test probe, chip resistor may be cracked or the solder joint may be damaged. Current Sensing Resistor Wide Terminal(RJ) High Power Resistor General(RCW)   Cautions for PCB handling  Hold the edges of the board mounted with chip resistor with both hands since holding with one hand may bend the board.  Do not use dropped boards, which may degrade the quality of chip resistor.  Pay attention to the following conditions when mounting other components on the back side of The board after chip resistor has been mounted on the front side.  When the suction nozzle is placed too close to the board, board deflection stress may be applied to chip resistor on the back side, resulting in cracks in chip resistor.  Check if proper value is set on each chip mounter for a suction location, a mounting gap and a suction gap by the thickness of components. Nozzle Force   ㆍPrevent shock vibrations of the board when the test-probe contacts a PCB. Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance   ㆍAvoid PCB flexing by using the support pin on the back side of the PCB.   ㆍPlace equipment with the support pin as close to the test-probe as possible. High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS)   Mounting other components   ㆍConfirm the position of the support pin or jig when checking the electrical performance of chip resistor after mounting on the PCB. Current Sensing Resistor Ultra Low ohms(RU, RUK) Metal_CSR Metal Plate_Clad(RLP,RLC) Assembly Handling  chip resistor or solder joint may be cracked with the vibration of PCB, if ultrasonic vibration is too strong during cleaning. When high pressure cleaning equipment is used, test should be done for the cleaning equipment and its process before the cleaning in order to avoid damages on chip resistor. Current Sensing Resistor Low ohms(RUT) Packaging Standard Resistance Value Test Pin Not recommended Electrical & Mechanical Caution Test Pin Process of Mounting Soldering, Design Recommended Caution of Application 56 57 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering   Board mounting with leads  If the board is bent when inserting components (transformer, IC, etc.) into it, chip resistor or solder joint may be cracked Product Characteristic data Notes Adhesive selection Pay attention to the following if an adhesive is used to position chip resistor on the board before soldering.  Pay attention to the followings  1) Reduce the stress on the board during insertion by increasing the size of the lead insertion hole.  2) Insert components with leads into the board after fixing the board with support pins or a dedicated jig.  3) Support the bottom side of the board to avoid bending the board.  4) Check the status of the height of each support pin regularly when the support pins are used. Not recommended Recommended   Requirements for Adhesives  1) They must have enough adhesive strength to prevent chip resistor from slipping or moving during the   handling the board.  2) They must maintain their adhesive strength when exposed to soldering temperatures.  3) They should not spread when applied to the PCB.  4) They should have a long pot life.  5) They should hardened quickly.  6) They should not corrode the board or chip resistor materials.  7) They should be an insulator type that does not affect the characteristic of chip resistor.  8) They should be non-toxic, not harmful, and particularly safe when workers touch the adhesives.   Caution before Applying Adhesive  Check the correct application conditions before attaching chip resistor to the board with an adhesive.   If the dimension of land, the type of adhesives, the amount of coating, the contact surface areas, the curing temperature, or other conditions are not appropriate, it may degrade the chip resistor performance.   Socket and / or connector attach / detach  Since the insertion or removal from sockets and connectors may cause the board to bent, make sure that chip resistor mounted on the board should not be damaged in this process. Force   Cautions for selecting Adhesive  Depending on the type of the chosen adhesive, chip resistor insulation resistance may be degraded.  In addition, chip resistor may be cracked by the difference in contractile stress caused by the different contraction rate between chip resistor and the adhesive.   Cautions for the amount of applied adhesive and curing temperature   Fastening screw  1) The inappropriate amount of the adhesive cause the weak adhesive strength, resulting in the a mounting defect in chip resistor.  2) Excessive use of the adhesive may cause a soldering defect, loss of electrical connection, incorrect curing, or slippage of a mounting position, thereby an inflow of the adhesive onto a land section should be avoided.  3) If the curing temperature is too high or the curing time is too long, the adhesive strength will be degraded. In addition, oxidation both on the outer termination (Sn) of chip resistor and the surface of the board may deteriorate the solderability.  When attaching a shield on a board, the board may be bent during a screw tightening work.  Pay attention to the following conditions before performing the work. General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT)  1) Plan the work to prevent the board from bending.  2) Use a torque driver to prevent over-tightening of the screw.  3) Since the board may be bent by soldering, use caution in tightening the screw. Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 58 59 CHIP RESISTORS CHIP RESISTORS Process of Mounting Soldering Design Flux Circuit design   The excessive amount of flux generates excessive flux gases which may deteriorate solderability.  Therefore, apply the flux thin and evenly as a whole.   Flux with a high ratio of halogen may oxidize the outer termination of chip resistor, if cleaning is   Not done properly. Therefore, use flux with a halogen content of 0.1% max. Product Characteristic data Notes General_Standard Standard(RC) When the board is dropped or bent, chip resistor mounted on the board may be short-circuited by   The drop in insulation resistance. Therefore, it is required to install safety equipment such as a fuse  To prevent additional accidents when chip resistor is short-circuited, otherwise, electric short and  Fire may occur. This product is not a safety guaranteed product. General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM)   Strong acidic flux can degrade the chip resistor performance   Check the solder quality of chip resistor and the amount of remaining flux surrounding chip resistor after the mounting process. PCB Design   Unlike lead type components, SMD type components that are designed to be mounted directly on the board are fragile to the stress. In addition, they are more sensitive to mechanical and thermal stress than lead type components. Coating   Crack caused by Coating  A crack may be caused in the chip resistor due to amount of the resin and stress of thermal contraction of the resin during coating process.  During the coating process, the amount of resin and the stress of thermal contraction of the resin may cause cracks in chip resistor  The difference of thermal expansion coefficient between the coating, or a molding resin may cause destruction, deterioration of insulation resistance or dielectric breakdown of chip resistor such as cracks or detachment, etc.   Recommended Coating material  1) A thermal expansion coefficient should be as close to that of chip resistor as possible.  2) A silicone resin can be used as an under-coating to buffer the stress.  3) The resin should have a minimum curing contraction rate.  4) The resin should have a minimum sensitivity (ex. Epoxy resin).  5) The insulation resistance of chip resistor can be deteriorated if a high hygroscopic property resin is used in a high humidity condition.  6) Do not use strong acid substances due to the fact that coating materials inducing a family of halogen substances and organic acid may corrode chip resistor.   Chip resistor crack by PCB material type  A great difference of the thermal expansion coefficient between PCB and chip resistor causes   Thermal expansion and contraction, resulting in cracks in chip resistor. Even though chip resistor is mounted on a board with a fluorine resin or on a single-layered glass epoxy, cracks in chip resistor may occur. Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Design system evaluation   Evaluate the actual design with chip resistor to make sure there is no functional issue or violation of specifications of the finished goods. Metal_CSR Metal Plate_Clad(RLP,RLC)   Surge resistance must be evaluated since the excessive surge caused by the inductance of the actual system may apply to chip resistor. High Power Resistor General(RCW)   Note the actual chip resistor size and the termination shape. High Voltage Chip Resistor (RCV) Land dimension Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) The recommended land dimension is determined by evaluating the actual SET and a board C Lead free Chip Resistor General, Array, AntiSulfur : Land Pattern Center Common Array 3-Terminal Array(RFT) : Chip Resistor A B A (Unit: mm) Size Chip Size(mm) A B 2A+B C 0402 0.40 × 0.20 0.17 0.20 0.54 0.18 0603 0.60 × 0.30 0.37 0.28 1.02 0.29 1005 1.00 × 0.50 0.60 0.50 1.70 0.50 1608 1.60 × 0.80 0.80 0.80 2.40 0.80 2012 2.00 × 1.20 0.90 1.40 3.20 1.20 3216 3.20 × 1.60 1.30 1.80 4.40 1.50 3225 3.20 × 2.50 1.30 1.80 4.40 2.40 5025 5.20 × 2.50 1.40 3.30 6.10 2.40 6432 6.40 × 3.20 1.40 4.60 7.40 3.00 Characteristics Performance Packaging Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application 60 61 CHIP RESISTORS CHIP RESISTORS Others Storage environment   Recommendation for temperature/humidity  Even taping and packaging materials are designed to endure a long-term storage, they should be stored with a temperature of 0~40°C and an RH of 0~70% otherwise, too high temperatures or humidity may deteriorate the quality of the product rapidly.  As oxidization is accelerated when relative humidity is above 70%RH, the lower the humidity is, the better the solderability is.  As the temperature difference may cause dew condensation during the storage of the product, it is a must to maintain a temperature control environment   Shelf life  An allowable storage period should be within 6 months from the outgoing date of delivery in consideration of solderability.  It can be stored for a long time in vacuum at room temperature, but if vacuum condition is not available, it is recommended to be stored in a dry condition inside desiccator.  As for products in storage over 6 months, please check solderability before use. Product Characteristic data Notes Waste treatment In case of scrapping chip resistor, it is incinerated or buried by a licensed industrial waste company.  When scrapping chip resistor, it is recommended to incinerate or bury the scrappage by a licensed Industrial waste company. Operating temperature The operating temperature limit is determined by the specification of each models.   Do not use chip resistor over the maximum operating temperature.  Pay attention to equipment’s temperature distribution and the seasonal fluctuation of ambient temperature.   The surface temperature of chip resistor cannot exceed the maximum operating temperature including selfheating effects. Transportation The performance of chip resistor may be affected by transportation conditions. Corrosion   Caution for corrosion environment  As corrosive gases may deteriorate the solderability of chip resistor outer termination, it is a must   To store chip resistor in an environment without gases. chip resistor that is exposed to corrosive   Gases may cause its quality issues due to the corrosion of plating layers and the penetration of moisture.  Particularly, in hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas atmosphere, the electrode of resistor can be corroded and defects may occur. So, general products aside from special products, such as ASR, must not be used in these conditions.  If failure occurs when using in the mentioned gas environment, our company is not responsible.   Chip resistor shall be protected from excessive temperature, humidity and a mechanical force during transportation.  During transportation, the cartons shall not be deformed and the inner packaging shall be protected from excessive external forces.   Do not apply excessive vibrations, shocks or excessive forces to chip resistor.  1) If excessive mechanical shock or stress are applied, chip resistor’s ceramic body may crack.  2) When the surface of chip resistor is hit with the sharp edge of an air driver, a soldering iron, or a tweezer, etc, chip resistor may crack or become short-circuited.   Chip resistor may crack and become non-functional due to the excessive shocks or dropping during transportation.   If external electrode of chip resistor is water-logged, defects due to corrosion may occur. Notice Equipment in operation   Do not touch chip resistor directly with bare hands to prevent an electric shock or damage.   The termination of chip resistor shall not be contacted with a conductive object (short –circuit).  Do not expose chip resistor to conductive liquid containing acidic or alkali material.    Do not use the equipment in the following conditions. Some special products are excluded from this document.  Please be advised that this is a standard product specification for a reference only.  We may change, modify or discontinue the product specifications without notice at any time.  So, you need to approve the product specifications before placing an order.  Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. General_Standard Standard(RC) General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Center Common Array 3-Terminal Array(RFT) Characteristics Performance Packaging  1) Exposure to water or oil  2) Exposure to direct sunlight  3) Exposure to Ozone or ultra-violet radiation.  4) Exposure to corrosive gas (e.g. hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas)  5) Exposure to vibration or mechanical shock exceeding specified limit  6) Exposure to high humidity Standard Resistance Value Electrical & Mechanical Caution   If the equipment starts generating any smoke, fire or smell, immediately switch it off or unplug from the power source.  If the equipment is not switched off or unplugged, serious damage may occur due to the continuous power supply. Please be careful with the high temperature in this condition. Process of Mounting Soldering, Design Caution of Application 62 63 CHIP RESISTORS CHIP RESISTORS Caution of Application Product Characteristic data Notes Disclaimer Quality System Certification List The products listed as follows are NOT designed and manufactured for any use and applications set forth below.  Please note that any misuse of the products deviating from products specifications or information provided in this Spec sheet may cause serious property damages or personal injury. Table 1: Certification list of Samsung Factory Certification IATF 16949  ① Aerospace/Aviation equipment  ② Automotive of Transportation equipment (vehicles, trains, ships, etc)  ③ Military equipment  ④ Atomic energy-related equipment  ⑤ Undersea equipment  ⑥ Any other applications with the same as or similar complexity or reliability to the applications General_Standard Standard(RC) Section Philippine Authority BSI Number IATF_91430-005 Date 2021-08-17 Limitation Please contact us with usage environment information such as voltage, current, temperature, or other special conditions before using our products for the applications listed below. The below application conditions require especially high reliability products to prevent defects that may directly cause damages or loss to third party's life, body or property.  If you have any questions regarding this ‘Limitation’, you should first contact our sales personnel or application engineers. ISO 14001  ① Medical equipment  ② Disaster prevention/crime prevention equipment  ③ Power plant control equipment  ④ Traffic signal equipment  ⑤ Data-processing equipment  ⑥ Electric heating apparatus, burning equipment  ⑦ Safety equipment  ⑧ Any other applications with the same as or similar complexity or reliability to the applications ISO 45001 QC 080000 Validity 2024-08-16 Authority BSI Number EMS 77354 Date 2021-07-13 Validity 2024-07-12 Authority BSI General_Standard Reverse(RCB) Array Type Resistor Flat(RF, RM) Array Type Resistor Concave(RN, RM, RK) Array Type Resistor Convex(RP) Current Sensing Resistor Low ohms(RUT) Current Sensing Resistor Ultra Low ohms(RU, RUK) Current Sensing Resistor Wide Terminal(RJ) Metal_CSR Metal Plate_Clad(RLP,RLC) High Power Resistor General(RCW) High Voltage Chip Resistor (RCV) Anti-Sulfur Resistor General, Array(RCS, RFS, RPS) Lead free Chip Resistor General, Array, AntiSulfur Number OHS 568723 Date 2019-10-14 Characteristics Performance Validity 2022-10-13 Packaging Authority IECQ Number IECQ-H ULTW 10.0016 Date 2019-07-02 Center Common Array 3-Terminal Array(RFT) Standard Resistance Value Electrical & Mechanical Caution Process of Mounting Soldering, Design Caution of Application Validity 64 65 2022-07-04 CHIP RESISTORS Component sales offices Head Office 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Republic of Korea Tel  +82-31-210-5114 (Main Number) America Asia San Jose Shenzhen Samsung Electro Mechanics America Inc. (HQ) 3655 N 1st street, San Jose CA 95134, U.S.A. Tel  +1-408-544-5454 Samsung Electro-Mechanics (ShenZhen) Co.,Ltd.(HQ) 14F, Tower A, SCC Building, Junction of Houhai Blvd. and Haide 1st Rd., Nanshan Dist., Shenzhen City, China. Tel  +86-755-8608-5574 San Diego Samsung Electro Mechanics America Inc.(San Diego office) 5405 Morehouse Drive, Suite #220 San Diego CA 92121 USA Tel  +1-858-263-3024 Phoenix Samsung Electro Mechanics America Inc.(Phoenix Office) 4505 E Chandler Blvd suite #105, Phoenix, AZ, 85048, U.S.A. Tel  +1-480-592-0184 Detroit Samsung Electro Mechanics America Inc. (Detroit Office) 4121 N Atlantic Blvd Auburn Hills Michigan 48326, U.S.A. Shanghai Samsung Electro-Mechanics Co.,Ltd. (Shanghai Branch) 13F Room 1301-1302, Tower B, SOHO Zhongshan Building, No.1065 Zhongshan West Rd., Changning Dist., Shanghai City, China. Tel  +86-21-2501-5803 Beijing Samsung Electro-Mechanics Co.,Ltd. (Beijing Branch) 21F 2101-3, Samsung Tower, Building 1,Yard31, Jinghui Street,Chaoyang Dist, Beijing City, China. Tel  +86-10-5092-8701 Taipei Samsung Electro-Mechanics Co.,Ltd. (Taipei Branch) 9F-1, No.399 Rueykuang Rd., Neihu Dist., Taipei City, Taiwan. Tel  +886-2-2656-8351 Europe Frankfurt Samsung Electro-Mechanics GmbH. (HQ) Koelner Str. 12, 65760 Eschborn, Germany. Tel  +49-6196-66-3300 Singapore Samsung Electro-Mechanics Private Limited(HQ) 3 Church Street Samsung Hub #23-01 Singapore. Tel  +65-6933-2600 Penang Munich Samsung Electro-Mechanics GmbH. (Munich Office) Reichenbachstrasse 2, 85737 Ismaning, Germany. Tel  +49-6196-66-7237 Samsung Electro-Mechanics Private Limited(Penang Office) Unit 9-06, Menara Boustead, 39 Jalan Sultan Ahmad Shah, 10050, Georgetown, Penang, Malaysia. Tel  +60-4-818-3912​ Stuttgart New Delhi Samsung Electro-Mechanics GmbH. (Stuttgart Office) Leitzstrasse 45, 70469 Stuttgart, Germany. Tel  +49-7114-906-6281 Samsung Electro-Mechanics Private Limited(New Delhi Office) G-4, Ground Floor Salcon Aurum Building, Jasola New Delhi-110025, India. Tel  +91-956-005-0310 Helsinki Tokyo Samsung Electro-Mechanics GmbH. (Helsinki Office) Keilaranta 1, 02150 Espoo, Finland. Tel  +35-898-53-1132 Samsung Electro-Mechanics Japan Co., Ltd(HQ) Shinagawa Grand Central Tower 9F, 2-16-4, Kounan, Minato-ku, Tokyo, Japan. Tel  +81-3-6369-6461 Manufacturing sites Suwon Plant (HQ) China Tianjin 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do,   Republic of Korea Tel  +82-31-210-5114 (Main Number) 80, Xiaqing road, TEDA west district, Tianjin, China Tel  +86-6686-3333 (1120, 3620) Philippines Busan Plant 333, Noksansaneopjung-ro, Gangseo-gu, Busan, Republic of Korea Tel  +82-31-210-5114 (Main Number) BLK 5&6 Calamba Premiere International Park Brgy. Batino Calamba, Laguna Philippines Tel  +63-49-508-8300 All information indicated in this catalog is as of Dec. 2021 The specifications and designs contained herein may be subject to change without notice 66 www.samsungsem.com