RCS3216J270CS

Anti-Sulfur Thick Film Chip Resistors (RCS General) Anti-Sulfur Thick Film Chip Resistors - 0603(0201), 1005(0402), 1608(0603), 2012(0805), 3216(1206), 3225(1210), 5025(2010), 6432(2512) ■ Features ● ● ● ● ● Small, thin and lightweight High reliability Stable in Sulfur Atmosphere (Anti-sulfur) Suitable size and package for surface mount assembly RoHS Compliant. ■ Part Number System RCS RCS 1005 J 150 CS Type Size : mm (inch) Tolerance Resistance Value Packing Type Anti-Sulfur chip resistor 0603 0.6×0.3mm (0201) F ±1% 1005 1.0×0.5mm (0402) G ±2% 1608 1.6×0.8mm (0603) J ±5% 2012 2.0×1.2mm (0805) 3216 3.2×1.6mm (1206) 3225 3.2×2.5mm (1210) 5025 5.0×2.5mm (2010) 6432 6.4×3.2mm (2512) * Jumper : ‘J’ - 3-digit coding System (E-24 series) - 4-digit coding System (E-96 series) - Jumper : ‘000’ CS 7” reel ES 10” reel AS 13” reel Anti-Sulfur Thick Film Chip Resistors (RCS General) ■ Structure and Dimensions [ Top View ] [ Side View ] [ Bottom View ] A T W B A L [ Unit : mm ] Size(mil) L W T A B Unit Weight RCS0603(0201) 0.60±0.03 0.30±0.03 0.23±0.03 0.15±0.05 0.15±0.05 0.15mg RCS1005(0402) 1.00±0.05 0.50±0.05 0.35±0.05 0.20±0.10 0.25±0.10 0.6mg RCS1608(0603) 1.60±0.10 0.80±0.10 0.45±0.10 0.30±0.20 0.35±0.10 2.1mg RCS2012(0805) 2.00±0.20 1.25±0.15 0.55±0.10 0.40±0.20 0.35±0.20 4.9mg RCS3216(1206) 3.20±0.20 1.60±0.15 0.55±0.10 0.45±0.20 0.40±0.20 9.5mg RCS3225(1210) 3.20±0.20 2.55±0.20 0.55±0.10 0.45±0.20 0.40±0.20 16mg RCS5025(2010) 5.00±0.20 2.50±0.20 0.55±0.10 0.60±0.20 0.60±0.20 26mg RCS6432(2512) 6.30±0.20 3.20±0.20 0.55±0.10 0.60±0.20 0.60±0.20 41mg Anti-Sulfur Thick Film Chip Resistors (RCS General) ■ Applications and Ratings Type Size (mil) Rated Power [W] RCS0603 0201 1/20 25 RCS1005 0402 1/16 50 RCS1608 0603 1/10 50 RCS2012 RCS3216 0805 1/8 1206 1/4 RCS3225 1210 1/3 RCS5025 2010 2/3 200 RCS6432 2512 1 200 Rated Voltage [V] PR Max Working Tolerance Voltage [%] [V] 150 P : Rated Power(W) R : Resistance(Ω) 200 200 ±1(F) ±5(J) ±0.5(D) ±1(F) ±5(J) Resistance Range [Ω] T.C.R [ppm/℃] Working Temp. [℃] 1 ~ 10M 1~9.9Ω : ±300 10~10MΩ : ±250 -55~125 1 ~ 10M 1~9.9Ω : ±300 10~10MΩ : ±100 Moisture Level Level 1 -55 ~ 155 • Please contact our sales representatives or engineers for other specifications ■ Power Derating Curve ■ Jumper Ratings 1005(0402)~ 6432(2512) sizes 0603(0201) size Type Rated Current (A) Max Overload Current (A) 0603 0.5 1 1005, 1608 1 2 2012, 3216, 3225, 5025, 6432 2 4 ■ Rated Voltage V= E : Rated Voltage (V) P : Rated Power (W) R : Resistance Value (Ω) Anti-Sulfur Thick Film Chip Resistors (RCS General) ■ Standard Soldering Pad Dimensions : Land Pattern C : Chip Resistor A B A [ Unit : mm ] Size(mil) Reflow Soldering A B 2A + B C RCS0603(0201) 0.37 0.28 1.02 0.29 RCS1005(0402) 0.60 0.50 1.70 0.50 RCS1608(0603) 0.80 0.80 2.40 0.80 RCS2012(0805) 0.90 1.40 3.20 1.20 RCS3216(1206) 1.30 1.80 4.40 1.50 RCS3225(1210) 1.30 1.80 4.40 2.40 RCS5025(2010) 1.40 3.30 6.10 2.40 RCS6432(2512) 1.40 4.60 7.40 3.00 Anti-Sulfur Thick Film Chip Resistors (RCS General) ■ Performance Characteristics ITEM Requirements Specification Resistance Within the specified tolerance Temp. Characteristic Within the specified T.C.R Short time Overload ΔR < ±1%+0.1Ω Test Conditions (JIS C 5201-1) JIS C 5201-1 4.5 JIS C 5201-1 4.8 +20℃ → -55℃ / +20℃ → +125℃ JIS C 5201-1 4.13 Rated Voltage×2.5, 5sec JIS C 5201-1 4.17 Rosin Ethanol (25%WT) 245+5/-0℃, 2±0.5 sec Solderability Immersed over 95% Resistance to Solder Heat ΔR < ±1%+0.1Ω JIS C 5201-1 4.18 260±5℃, 10±1 sec Temp. Cycle ΔR < ±1%+0.1Ω JIS C 5201-1 4.19 -55℃ ↔ +125℃, 100 cycle Moisture Resistance ΔR < ±3%+0.1Ω JIS C 5201-1 4.24 40±2℃, 90~95%RH, 1,000+48hours Load Life ΔR < ±3%+0.1Ω JIS C 5201-1 4.25 Rated Voltage, 70±2℃, 1,000+48hours 90mins ON, 30mins OFF High Temp. Exposure ΔR < ±3%+0.1Ω JIS C 5201-1 4.25.3 155±2℃, 1,000+48hours Flower of Sulfur (FOS) ΔR < ±1%+0.1Ω 105℃, FoS, 720+2hours ※ The reliability test condition can be replaced by the corresponding accelerated test condition. Anti-Sulfur Thick Film Chip Resistors (RCS General) Product specifications included in the specifications are effective as of March 01, 2015. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.