EM1V

Series 222E 5.0 x 5.0mm Compact Tactile Switch     Surface mount gull-wing and J-bend terminal configurations Compatible with IR reflow and manual soldering Variety of operating force & actuator height options With ground terminal Ordering Information Terminal Type Series 222E 20212124 Code M1 J1 Actuating Direction M1 1 2 ActuatorB Height V 1 A Actuator Force Packaging A S R RRRTTT T E Spec. Code Surface mount gull wing, square top Surface mount J bend, square top Code V R Code Spec. A B Vertical Code Spec. A 1.5mm, not available for surface mount J bend round top Spec. Tape & reel packaging Spec. 160 gf, black actuator 260 gf, white actuator Notes: Contact CTS for other common features not listed. 2021-12-7 Rev. G Page 1 of 4 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. T T TTT T TSS T T Series 222E Tactile Switch Electrical Specifications Parameter Conditions & Remarks Min Contact Resistance Between insulated terminals 1 minute between adjacent switches Insulation Resistance Dielectric Strength Max Unit 50 milliohms 100 Nonswitching Rating Megohms 250 VAC 50 or 12 mA or VDC Mechanical and Environmental Soldering Maximum reflow temperature, 260°C for 5 seconds Maximum manual temperature, 350°C for 3 seconds RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Actuation Life 160±50 gf 260±50 gf 160 gf: 1,000,000 cycles 260 gf: 200,000 cycles Actuator Strength 3 Kgf maximum Travel 0.25+0.05 −0.15 mm Packaging Standard tape and reel packaging Operating Temperature Range Storage Temperature Range -40°C to +85°C Operating Force -40°C to +85°C Soldering Profile 2021-12-7 Rev. G Page 2 of 4 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222E Tactile Switch Mechanical Specifications Figure 1 – 222EM1VA, Surface Mount Gull Wing, Square Top, With Ground Terminal Figure 2 – 222EJ1VA, Surface Mount J Bend Terminal, Square Top, With Ground Terminal 2021-12-7 Rev. G Page 3 of 4 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 222E Tactile Switch Packing: Tape and Reel Surface Mount Gull Wing/J Bend, Square Top with 1.5mm Actuator Height The packing specifications: Structure and materials: 1. 2. 3. 4. 5. 6. 7. 2021-12-7 Rev. G ③ COVER TAPE POLYESTER ② CARRIER TAPE POLYSTYRENE ① REEL POLYSTYRENE NO. PARTS NAME MATERIALS Packing quantity: 4,000 pcs/reel More than 10 empty pockets should remain at each end of the carrier tape for each reel. Shortage less than 10 pcs a reel is acceptable but no more than 3 consecutive empty pockets are allowed. Stripping strength of cover tape is between 10 gf to 70 gf and stripping angle should be within 165°~180°. The product in the pocket of carrier tape should be placed in a specified correct position. Tape and reel per EIA-481. Dimensions: Page 4 of 4 © 2021 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: CTS: 222EJ1VAAR 222EJ1VABR 222EM1VAAR 222EM1VABR