SEC1E01C

SEC1001Series 3×1.5 Surface Mount LED SEC1001 Series External Dimensions Cathode mark 1.4 0.9 (0.5) Cathode 0.6 (Flat Lens) (Unit: mm) Directivity (Typical) 1.5 1.3 0° 30° 60° 30° 60° 3.0 2.0 1.5 P.C.B. Resin Anode 1.6 90° 100% 50 0 50 90° 100% Tolerance: ±0.3 Absolute maximum ratings (Ta=25°C) Symbol IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Rating GaP/GaAsP/GaAlAs GaN/InGaN 30 −0.45 70 4 5 −30 to +85 −25 to +80 −30 to +100 Condition Above 25°C f=1kHz, tw≤100µ s Electrical Optical characteristics (Ta=25°C) Part Number Forward voltage Reverse current Intensity Peak wavelength Spectrum half width VF Condition IR Condition IV Condition λP Condition ∆λ Condition Chip material (V) IF (µA) VR (mcd) IF (nm) IF (nm) IF typ max (mA) max (V) typ (mA) typ (mA) typ (mA) 2.0 1.7 1.9 1.9 1.9 2.0 2.0 2.0 2.0 3.3 3.3 3.9 2.5 2.2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.8 10 10 10 10 10 10 10 10 10 20 20 20 100 100 100 100 100 100 100 100 100 10 10 10 4 4 4 4 4 4 4 4 4 5 5 5 1.5 100 10 16 13 25 22 11 8.0 150 50 6.0 20 20 20 20 20 20 20 20 20 20 20 20 700 660 630 610 587 570 560 558 555 525 470 430 10 10 10 10 10 10 10 10 10 20 20 20 100 30 35 35 33 30 20 20 20 35 35 65 10 10 10 10 10 10 10 10 10 20 20 20 GaP GaAlAs GaAsP Emitting color Lens color SEC1101C SEC1601C Red SEC1201C SEC1801C Amber Orange SEC1901C Yellow SEC1701C-YG Green SEC1401C Deep green SEC1401E-TG Pure green SEC1501C Ultra-high-intensity SECU1D01C pure green Ultra-highintensity blue SECU1E01C Blue SEC1E01C Highintensity red Deep red Clear Clear Clear Clear Clear Clear Clear Transparent green Clear Clear Clear Clear GaP InGaN GaN 50