SECU1605C-S

5-1-3 Unicolor surface mount ■1.6 × 0.8 Miniature Surface Mount LEDs SEC1005 Series Part Number SECU1605C-S SECU1205C-S SECU1805C-S SECU1905C-S * SECK1D05C-S SECT1D05C-S SECS1L05C-S SECK1L05C-S * SECT1E05C-S * SECK1E05C-S Emitting Color Deep red Red Amber Orange Green Pure green Aqua blue Aqua blue Blue Blue Lens Color Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 1.9 1.9 1.9 3.8 3.3 3.1 3.5 3.3 3.6 2.5 2.5 2.5 2.5 4.3 3.8 3.6 4.1 3.8 4.0 10 10 10 10 10 10 10 10 10 10 25 45 50 40 45 180 50 20 40 10 10 10 10 10 10 10 10 10 10 10 650 635 615 591 514 520 486 488 460 470 10 10 10 10 10 10 10 10 10 10 639 625 607 589 520 526 490 490 466 472 10 10 10 10 10 10 10 10 10 10 20 20 17 15 40 35 45 30 25 30 10 10 10 10 10 10 10 10 10 10 Chip Material AlGaInP AlGaInP AlGaInP AlGaInP GaN on Si InGaN InGaN GaN on Si InGaN GaN on Si *Mass production in preparation Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 InGaN -30 -60 0 30 60 -60 -30 0 30 60 0.8 0.55 0.35 (0.2) 0.7 Cathode Cathode mark AlGaInP -30 -60 1.6 0 30 60 -60 -30 0 30 60 1.2 1.0 -90 1.0 0.5 0 0.5 90 1.0 -90 1.0 0.5 0 0.5 90 1.0 Resin P.C.B. Anode -90 1.0 0.5 0 0.5 90 1.0 -90 1.0 0.5 0 0.5 90 1.0 Product Mass: Approx. 0.001 g 0.3 LEDs 249 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs