SEL1E50CM-S

5-1-1 Unicolor lamps ■5φ Round Narrow Viewing Angle LEDs SEL1050M Series (available as Direct Mount) Part Number SEL1250RM SEL1250SM SEL1850AM SEL1850DM SEL1950KM SEL1450EKM SEL1450GM-YG SEL1550CM SEL1E50CM-S SELU1250CM * SELT1D50CM-S SELT1E50CM-S Emitting Color Red Red Amber Amber Orange Green Green Pure green Blue       Red Ultrahigh       Pure green luminosity       Blue Lens Color Diffused red Transparent red Transparent orange Diffused orange Transparent orange Transparent green Diffused green Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 48 20 630 10 620 10 35 10 1.9 2.5 10 75 20 630 10 620 10 35 10 1.9 2.5 10 90 20 610 10 605 10 35 10 1.9 2.5 10 60 20 610 10 605 10 35 10 1.9 2.5 10 96 20 587 10 590 10 33 10 2.0 2.5 10 190 20 560 10 567 10 20 10 2.0 2.5 10 120 20 560 10 567 10 20 10 2.0 2.5 10 72 20 555 10 559 10 20 10 4.0 4.6 10 80 10 430 10 466 10 65 10 2.0 2.5 20 900 20 635 20 625 20 15 20 3.3 4.0 20 6500 20 512 20 520 20 35 20 3.3 4.0 20 2000 20 460 20 465 20 25 20 Chip Material GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaN AlGaInP InGaN InGaN * Mass production in preparation Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 ø5.0 ±0.2 –30° –60° 30° 60° 60° 30° 30° 60° 0.65 max –90° 100% 50 0 50 90° 100% 90° 100% 50 0 50 90° 100% Resin burr 0.3max Anode 0.5±0.1 Product Mass: Approx. 0.30 g 222 LEDs Cathode Diffused lens Transparent lens 1.0min (2.54) 21.0min 0.5±0.1 9.4±0.3 0 0° Resin heap 0.8max 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs