SEL2413E

5-1-1 Unicolor lamps ■3φ Inverted-Cone LEDs (for lighting-panels and illumination) SEL2013 Series Part Number SEL2613CS-S SEL2213C SEL2813A SEL2913K SEL2713K SEL2413E SEL2413G SEL2513E SELT2E13C SELT2WA13C SELT2WC13C SELT2WD13C SELT2WE13C SELT2WF13C SELT2WH13C SELT2WJ13C SELT2WK13C Emitting Color High luminosity red Red Amber Orange Yellow Green Green Pure green Blue White Bulb Light Fancy blue green Ultrahigh Light pink luminosity Light blue green Fancy green Fancy pink Fancy red purple Lens Color Transparent light red Water clear Transparent orange Transparent light orange Transparent yellow Transparent green Diffused green Transparent green Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.75 2.2 10 20 20 660 10 642 10 30 10 1.9 2.5 10 7.0 20 630 10 620 10 35 10 1.9 2.5 10 8.0 20 610 10 605 10 35 10 1.9 2.5 10 8.0 20 587 10 590 10 33 10 2.0 2.5 10 17 20 570 10 571 10 30 10 2.0 2.5 10 14 20 560 10 567 10 20 10 2.0 2.5 10 12 20 560 10 567 10 20 10 2.0 2.5 10 5.0 20 555 10 559 10 20 10 3.1 4.0 20 150 20 458 20 465 20 25 20 3.1 4.0 20 280 20 Chromaticity: x=0.300, y=0.295 3.1 4.0 20 220 20 Chromaticity: x=0.452, y=0.412 3.1 4.0 20 200 20 Chromaticity: x=0.170, y=0.365 3.1 4.0 20 240 20 Chromaticity: x=0.356, y=0.289 3.1 4.0 20 280 20 Chromaticity: x=0.200, y=0.300 3.1 4.0 20 320 20 Chromaticity: x=0.260, y=0.460 3.1 4.0 20 200 20 Chromaticity: x=0.382, y=0.268 3.1 4.0 20 150 20 Chromaticity: x=0.421, y=0.221 Chip Material GaAlAs GaAsP GaAsP GaAsP GaP GaP GaP GaP InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN InGaN Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 (Except GaAlAs chip) Resin burr 0.3max Resin heap 1.5max (GaAlAs) Resin heap 1.5max Resin burr 0.3max 2.6±0.1 30° 60° 30° 60° (1.3) 0.65max 0.4 ±0.1 0.65max (2.54) 0.4 50 0 50 (2.54) 1.7 1.7 3.8±0.1 3.8±0.1 Product Mass: Approx. 0.11 g 236 LEDs 0.4 1.0min 90° 100% 90° 100% Cathode 1.0min 0.45±0.1 0.45±0.1 Cathode (1.3) 25.8min 0.4±0.1 25.8min 2.6±0.1 0° ø3.1±0.1 ø3.1±0.1 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs