SEL2613CS-S

SEL2013 Series 3φ Inverted-cone LED for surface illumination SEL2013 Series External Dimensions (Other than GaAlAs chip) Cathode 1.0min 1.7 25.8min (1.3) ø3.1±0.1 (Unit: mm) 2.6±0.1 Directivity (Typical) Tolerance: ±0.3 3.8±0.1 (2.54) 0° 30° 60° 30° 60° 0.45±0.1 0.4 0.4±0.1 1.7 0.45±0.1 (GaAlAs) 3.8±0.1 (2.54) 0.65max 0.65max Resin burr 0.3max Resin heap 1.5max Resin heap 1.5max Resin burr 0.3max ø3.1±0.1 90° 100% 50 0 50 90° 100% 0.4 1.0min Cathode (1.3) 25.8min 0.4±0.1 2.6±0.1 Absolute maximum ratings (Ta=25°C) Symbol IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Rating 30 −0.45 100 3 −30 to +85 −30 to +100 Condition Above 25°C f=1kHz, tw≤100µs Electrical Optical characteristics (Ta=25°C) Part Number SEL2613CS-S SEL2213C SEL2813A SEL2913K Forward voltage Reverse current Intensity Peak wavelength Spectrum half width VF Condition IR Condition IV Condition λP Condition ∆λ Condition Chip material (V) IF (µA) VR (mcd) IF (nm) IF (nm) IF typ max (mA) max (V) typ (mA) typ (mA) typ (mA) 1.7 1.9 1.9 1.9 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 10 10 10 10 10 10 10 100 50 50 50 50 50 50 3 3 3 3 3 3 3 80 7.0 8.0 8.0 17 14 12 5.0 20 20 20 20 20 20 20 660 630 610 587 570 560 555 10 10 10 10 10 10 10 30 35 35 33 30 20 20 10 10 10 10 10 10 10 GaAlAs GaAsP Emitting color Lens color Highintensity red SEL2713K SEL2413E Green SEL2413G Pure green SEL2513E Red Amber Orange Yellow Transparent light red Clear Transparent orange Transparent light yellow Transparent yellow Transparent green Diffused green Transparent green GaP 28