SEL2915D

5-1-1 Unicolor lamps ■3φ Round Narrow Viewing Angle LEDs SEL2015 Series Part Number SEL2215R SEL2215S SEL2815A SEL2815D SEL2915A SEL2915D SEL2715K SEL2715Y SEL2415E SEL2415G SEL2515C SELU2215R-S Emitting Color Red Red Amber Amber Orange Orange Yellow Yellow Green Green Pure green Ultrahigh luminosity  Red Lens Color Diffused red Transparent red Transparent orange Diffused orange Transparent orange Diffused orange Transparent yellow Diffused yellow Transparent green Diffused green Water clear Diffused red Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 38 20 630 10 620 10 35 10 1.9 2.5 10 45 20 630 10 620 10 35 10 1.9 2.5 10 80 20 610 10 605 10 35 10 1.9 2.5 10 60 20 610 10 605 10 35 10 1.9 2.5 10 81 20 587 10 590 10 33 10 1.9 2.5 10 53 20 587 10 590 10 33 10 2.0 2.5 10 130 20 570 10 571 10 30 10 2.0 2.5 10 110 20 570 10 571 10 30 10 2.0 2.5 10 110 20 560 10 567 10 20 10 2.0 2.5 10 72 20 560 10 567 10 20 10 2.0 2.5 10 52 20 555 10 559 10 20 10 2.0 2.5 20 380 20 632 20 624 20 20 20 Chip Material GaAsP GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaP GaP AlGaInP Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 Resin heap 1.5max ø3.1±0.1 4.0±0.1 (1.3) 0° 30° 60° 30° 60° 60° 30° 0° 30° 60° 0.65max 25.4min 0.45±0.1 1.55 1.0min Diffused lens Transparent lens (2.54) ø3.8 Product Mass: Approx. 0.12 g 232 LEDs 0.4±0.1 Cathode 90° 100% 50 0 50 90° 100% 90° 100% 50 0 50 90° 100% 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs