SEL4410G

5-1-1 Unicolor lamps ■4φ Round Standard LEDs SEL4010 Series Part Number SEL4110R SEL4110S SEL4210R SEL4210S SEL4810A SEL4810D SEL4910A SEL4910D SEL4710K SEL4710Y SEL4410E SEL4410G SEL4510C SELU4410CKT-S Emitting Color Deep red Deep red Red Red Amber Amber Orange Orange Yellow Yellow Green Green Pure green Ultrahigh luminosity Green Lens Color Diffused red Transparent red Diffused red Transparent red Transparent orange Diffused orange Transparent orange Diffused orange Transparent yellow Diffused yellow Transparent green Diffused green Water clear Water clear Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.5 10 1.7 5 700 10 625 10 100 10 2.0 2.5 10 2.4 5 700 10 625 10 100 10 1.9 2.5 10 17 20 630 10 620 10 35 10 1.9 2.5 10 30 20 630 10 620 10 35 10 1.9 2.5 10 20 10 610 10 605 10 35 10 1.9 2.5 10 15 10 610 10 605 10 35 10 1.9 2.5 10 26 10 587 10 590 10 33 10 1.9 2.5 10 16 10 587 10 590 10 33 10 2.0 2.5 10 36 10 570 10 571 10 30 10 2.0 2.5 10 14 10 570 10 571 10 30 10 2.0 2.5 10 87 20 560 10 567 10 20 10 2.0 2.5 10 34 20 560 10 567 10 20 10 2.0 2.5 10 45 20 555 10 559 10 20 10 2.1 2.5 20 170 20 560 20 562 20 12 20 Chip Material GaP GaP GaAsP GaAsP GaAsP GaAsP GaAsP GaAsP GaP GaP GaP GaP GaP AlGaInP Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 Resin heap 1.5max 1.1max 0.45±0.1 ø4.8 ø4.0±0.2 25.5min 50 0 50 50 0 50 1.0min 90° 100% 90° 100% 90° 100% 90° 100% 0.8 (2.54) 60° 60° 60° 60° 6.5±0.5 1.5 30° 30° 30° 30° 5.0±0.2 0° 0° Diffused lens Transparent lens Cathode 2.2 Product Mass: Approx. 0.16 g 0.4±0.1 LEDs 225 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs