SEL5220S

5-1-1 Unicolor lamps ■5mm Pitch Lead Rectangular LEDs SEL5020 Series (available as Direct Mount) Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Chip Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF Material (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.75 2.2 10 25 10 660 10 642 10 30 10 GaAlAs 1.9 2.5 10 20 20 630 10 620 10 35 10 GaAsP 1.9 2.5 10 12 20 610 10 605 10 35 10 GaAsP 1.9 2.5 10 12 20 587 10 590 10 33 10 GaAsP 2.0 2.5 10 20 20 560 10 567 10 20 10 GaP 2.0 2.5 10 6.0 20 555 10 559 10 20 10 GaP 4.0 4.8 20 10 20 430 20 466 20 65 20 GaN 3.6 4.0 20 40 20 468 20 470 20 30 20 GaN on Si 2.0 2.5 20 75 20 650 20 639 20 20 20 AlGaInP 2.0 2.5 20 120 20 632 20 624 20 20 20 AlGaInP 2.0 2.5 20 150 20 611 20 605 20 17 20 AlGaInP 2.0 2.5 20 120 20 600 20 596 20 15 20 AlGaInP 2.0 2.5 20 130 20 591 20 590 20 15 20 AlGaInP 2.1 2.5 20 50 20 572 20 571 20 15 20 AlGaInP 2.1 2.5 20 18 20 560 20 562 20 12 20 AlGaInP 3.3 4.0 20 300 10 512 20 520 20 35 20 InGaN 3.3 4.0 20 90 10 458 20 465 20 25 20 InGaN Part Number SEL5620C SEL5220S SEL5820A SEL5920A SEL5420E SEL5520C SEL5E20C SELK5E20C-D SELU5620S-S * SELU5220C-S SELU5820C-S * SELU5B20C SELU5920A-S SELU5720C SELU5420E-S * SELT5D20C-S SELT5E20C-S Emitting Color High luminosity red Red Amber Orange Green Pure green Blue High luminosity Blue Deep red Red Amber Ultrahigh Light amber luminosity Orange Yellow Green Pure green Blue Lens Color Water clear Transparent red Transparent orange Transparent orange Transparent green Water clear Water clear Water clear Transparent red Water clear Water clear Water clear Transparent orange Water clear Transparent green Water clear Water clear * Mass production in preparation Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 (Except GaAlAs chip) Cathode mark Resin burr 0.3max Resin heap 0.8max Resin heap 0.8max Resin burr 0.3max (GaAlAs) Anode mark 23.0min 1.4 0° 30° 60° 30° 60° 60° 30° 0° 4.2±0.5 6.0±0.2 3.3±0.2 6.0±0.2 3.3±0.2 23.0min 60° 0.65max 0.65max 0.5±0.1 Cathode 1.0min 1.4 3.6 1.0min 3.6 50 0 50 50 0 50 (5.0) Cathode 90° 100% 90° 100% 90° 100% 90° 100% (5.0) 6.2 6.2 Product Mass: Approx. 0.23 g 0.5±0.1 0.5±0.1 0.5±0.1 4.2±0.5 30° LEDs 241 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs