SEL5521C

5-1-1 Unicolor lamps ■5mm Pitch Lead 3φ Lens LEDs SEL5021 Series (available as Direct Mount) Forward Voltage Part Number SEL5221S SEL5821A SEL5921A SEL5721C SEL5421E SEL5521C Emitting Color Red Amber Orange Yellow Green Pure green Lens Color Transparent red Transparent orange Transparent orange Water clear Transparent green Water clear VF (V) TYP 1.9 1.9 1.9 2.0 2.0 2.0 MAX 2.5 2.5 2.5 2.5 2.5 2.5 Conditions IF (mA) 10 10 10 10 10 10 Luminous Intensity Peak Wavelength Iv Conditions (mcd) IF (mA) TYP 35 20 60 20 60 20 90 20 95 20 35 20 λP (nm) TYP 630 610 587 570 560 555 Conditions IF (mA) 10 10 10 10 10 10 Dominant Wavelength Spectrum Half Bandwidth λd Conditions (nm) IF (mA) TYP 620 10 605 10 590 10 571 10 567 10 559 10 ∆λ (nm) TYP 35 35 33 30 20 20 Conditions IF (mA) 10 10 10 10 10 10 Chip Material GaAsP GaAsP GaAsP GaP GaP GaP Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 6.0±0.2 Cathode mark Resin burr 0.3max Resin heap 0.8max 3.2±0.2 ø3.0 ±0.2 5.8±0.5 30° 60° 30° 60° 60° 30° 30° 60° 3.9 0° 0° 0.65max 23.0min 0.5+0.1 0.5±0.1 90° 100% 50 0 50 90° 100% 90° 100% 50 0 50 90° 100% 1.0min (5.0) 1.4 Cathode 3.6 6.2 Product Mass: Approx. 0.23 g 242 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs