SEL6413E

5-1-1 Unicolor lamps ■3φ Inverted-Cone LEDs (for lighting-panels) SEL6013 Series (available as Direct Mount) Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ Conditions Conditions Conditions Conditions Conditions VF (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 2.0 2.5 10 14 20 560 10 567 10 20 10 2.0 2.5 10 6.0 20 558 10 564 10 20 10 2.0 2.5 10 5.0 20 555 10 559 10 20 10 2.0 2.5 20 30 20 632 20 624 20 20 20 2.0 2.5 20 60 20 600 20 596 20 15 20 Chip Material GaP GaP GaP AlGaInP AlGaInP Part Number SEL6413E SEL6413E-TG SEL6513C SELU6213C-S SELS6B13W Emitting Color Green Deep green Pure green Ultrahigh Red luminosity Light amber Lens Color Transparent green Transparent green Water clear Water clear Diffused white Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 Resin burr 0.3max Resin heap 0.8max 0.65max 0.45±0.1 0.4±0.1 ø3.5±0.1 30° 60° 30° 60° 23.0min (1.7) 2.5±0.1 0° 4.5 1.0min 90° 100% 50 0 50 90° 100% 0.8±0.2 3.5 4.0±0.2 4.4 Product Mass: Approx. 0.13 g Cathode (2.54) LEDs 235 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs