SEL6927A

5-1-1 Unicolor lamps ■4φ Bow Shaped LEDs SEL6027 Series (available as Direct Mount) Part Number SEL6227S SEL6927A SEL6427EP Emitting Color Red Orange Green Lens Color Transparent red Transparent orange Transparent green Forward Voltage Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Half Bandwidth Iv λP λd ∆λ VF Conditions Conditions Conditions Conditions Conditions (nm) (nm) (nm) (mcd) IF (mA) IF (mA) IF (mA) IF (mA) IF (mA) (V) TYP MAX TYP TYP TYP TYP 1.9 2.5 10 14 20 630 10 620 10 35 10 1.9 2.5 10 10 10 587 10 590 10 33 10 2.0 2.5 10 26 20 560 10 567 10 20 10 Chip Material GaAsP GaAsP GaP Directional Characteristics (representative example) External Dimensions (Unit: mm) Dimensional Tolerance: ± 0.3 Resin heap 0.8max Resin burr 0.3max 4.0 ±0.2 2.0 ±0.2 30° 60° 30° 60° 30° 60° 30° 60° 0.65max 0.45 ±0.1 4.6 4.9 23.0min 2.1 1.0min ±0.2 0° 0° 0.4 ±0.1 90° 100% 50 0 50 90° 100% 90° 100% 50 0 50 90° 100% (2.54) 0.8 ±0.2 4.0 ±0.2 4.4 Product Mass: Approx. 0.13 g 238 LEDs Cathode 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs